"Object reference not set to an instance of an object"

[LITOralis.nMd]

OK,

Display Information
-------------------
Display Device(s):
Display Mode(s):
Driver Version: 10.18.10.3379

When there is no display device listed, it's usually a problem with the video drivers.
You're using old drivers, so try updating them , you should do so even without PR in mind:


EDIT
http://www.intel.com/p/en_US/support/detect/graphics


INstall, reboot, go to PRlauncher-Support-Copy to clipboard and paste again, hopefully PRlauncher will be able to identify your display with the new drivers.

[Blade.3510]

Please post your system specs
PRlauncher->Support->Copy to Clipboard button
paste everything here.

Hey its me again, Cant find this to check if it reconised it from last time.

[LITOralis.nMd]

Hi Blade,

There is a big "Support" button under the play button on the PRLauncher main screen.
click it, then click copy to clipboard button...

[Blade.3510]

Oh right I cant even get to launcher any more it seems, It has gone back to throwing up the original error

[Blade.3510]

Ok an update this is with all the drivers updated I believe

Code: Select all

System Information
------------------
  Operating System: Microsoft Windows 8.1 Pro (6.3.9600)
      Architecture: 64-bit
   Current Culture: English (United Kingdom)
       Motherboard: Gigabyte Technology Co., Ltd. G1.Sniper Z87
         Processor: Intel(R) Core(TM) i7-4770K CPU @ 3.50GHz (Physical: 4, Logical: 8)
            Memory: 16.00 GB
      DIMM Modules: ChannelA-DIMM0: 4.00 GB @ 1333 MHz
                    ChannelA-DIMM1: 4.00 GB @ 1333 MHz
                    ChannelB-DIMM0: 4.00 GB @ 1333 MHz
                    ChannelB-DIMM1: 4.00 GB @ 1333 MHz
         Page File: 16.00 GB
    .NET Framework: 4.5.1, Runtime: 4.0.30319.34014

Display Information
-------------------
 Display Device(s): 
   Display Mode(s): 
    Driver Version: 10.18.14.4170
    Display Memory: 1024.00 MB
     Multisampling: 2, 4, 8
               DPI: 96 (100%)

Audio Information
-----------------
  Primary Playback: Speakers (4- Sennheiser 3D G4ME
 Primary Recording: Microphone (4- Sennheiser 3D G4
  Open AL Renderer: Software
               EAX: True
           EAX 1.0: False
           EAX 2.0: True
           EAX 3.0: False
           EAX 4.0: False
           EAX 5.0: False
             X-RAM: False

Disk Information
----------------
      Install Path: G:\Origin Downloads\Battlefield 2 Complete Collection
                    Free: 944.95 GB, Total: 1.82 TB, FS: NTFS, SSD: False
          Mod Path: G:\Origin Downloads\Battlefield 2 Complete Collection\mods\pr
                    Free: 944.95 GB, Total: 1.82 TB, FS: NTFS, SSD: False
     Profiles Path: C:\Users\Matt\Documents\ProjectReality\Profiles
                    Free: 15.31 GB, Total: 119.02 GB, FS: NTFS, SSD: True
    Update DL Path: C:\Users\Matt\AppData\Local\Project Reality\Project Reality BF2\Downloads
                    Free: 15.31 GB, Total: 119.02 GB, FS: NTFS, SSD: True
   Update Log Path: C:\Users\Matt\AppData\Local\Project Reality\Project Reality BF2\UpdateLogs
                    Free: 15.31 GB, Total: 119.02 GB, FS: NTFS, SSD: True

Game Information
----------------
    Installed Mods: bf2, pr, xpack
       Current Mod: pr
       BF2 Version: BF2 1.5
        PR Version: 1.2.0.0
          Language: english
   Debug Available: False
     Large Address: True
Supported Hardware: None

Profile Information
-------------------
      Profile 0001: Blade.3510
              Type: Online
        View Intro: True
        Fullscreen: True
      Display Mode: 
Display Mode Valid: False
   Graphics Scheme: Custom
     Multisampling: Off
             VSync: False
   Terrain Quality: Low
   Effects Quality: Medium
  Geometry Quality: Low
   Texture Quality: Medium
  Lighting Quality: Low
   Dynamic Shadows: Off
    Dynamic Lights: Off
 Texture Filtering: Medium
    Audio Provider: Software
    Provider Valid: True
     Audio Quality: Low
               EAX: False

[LITOralis.nMd]

Do you have a discrete GPU card or not?

[Blade.3510]

On board is Intel(R) HD Graphics 4600
where as my main GPU is the Radeon 7950

[PLODDITHANLEY]

Why is it not showing the moniter resolution, in game and monitor must be the same.

[Blade.3510]

Im still trying to figure out what I must have changed in my computer that is causing these problems, likely suspect is the mother board that was new back in 2014 or the win7 to win8 upgrade key that I used. All I know is I cant wait to play PR again.

[Devorst8r]

Hi there i was having the same problem as this thread , then i did what [R-COM]LITOralis.nMd said and used his settings but now when i try and join the game it says i cannot use those display settings so i adjusted everything to suit my requirements and i still get the error saying i cannot use the display settings??

Many thanks if you can solve my issue

[Devorst8r]

When i select diplay mode to 1920x1080 and click apply then close the box and then open the diplay settings again i am seeing that it is not saving the display mode

[Devorst8r]

Never mind i sorted my isse out , i was able to locate and save my original documents folder and just simply replaced it , may work for blade if he can find them also

[Crazeus]

I've had the same problem Devorst has but this is my first time trying to play Project Reality so I don't have old files I could use. Anyone know another way to fix the display problem?

Edit:
Fixed the display problem by putting the files from the default folder into the 0001 folder then deleted the server settings that I copied in. Problem is now I get the 1103 error

[Blade.3510]

Thanks guys I will try this again asap, really want to play again

[RENEGADO]

LITOralis.nMd;2011117']Here is a copy of my Documents\ProjectReality\Profiles\Default folder.

rename your Default directory to Default.old or something similar.
Then copy mine into place.

It is set to 1920x1080 60Hz in the video.con file. Manually edit that (in Notepad) if you have a different resolution.

https://www.dropbox.com/sh/yhuo4p4wcxlz ... wbjCsCBmEa

Thank you so much man !!! I fixed my problem using your file, really, thanks !