Page 6 of 9
Re: Read This If You Have Pr.exe problems
Posted: 2010-03-08 19:05
by gua
[R-DEV]Twisted Helix wrote:The run as administrator thing is if you are on Vista or Win7.
Do you know if your .NET has installed correctly ?
I dont know, I have the following installed:
.Net framework 2.0 service pack 2
.Net framework 3.0 service pack 2
.Net framework 3.5 service pack 1
And 0.9 did work before, but returned to desktop after playing one map and loading the next. Got tired of it and reinstalled everything and now it doesn't work anymore.
Re: Read This If You Have Pr.exe problems
Posted: 2010-03-09 17:01
by Twisted Helix
gua wrote: Got tired of it and reinstalled everything and now it doesn't work anymore.
Ok ... what I think has happened is that in your uninstalling (did you uninstall BF2 as well ? ), all the entries in your registry were not cleaned out.
This is very common in uninstalling programs ... for some reason manufacturers like to leave traces that their program was installed upon your machine ... not entirely sure why, but its not for your benefit thats for sure. These left over fragments eventually over time slow down the boot in and loading times of your OS. And just generally slow everything down. Which is why you have these Registry Cleaners (I personally prefer to do it by hand).
So anyway ... what has maybe happened is that BF2 is now installed into a different location, or PR has ... and their are left over registry entries pointing to somewhere else ... and its all getting confused.
So ... what to do is this ... uninstall PR and then uninstal BF2 .... then go into regedit (just type that in the run box in the start menu) and look for these keys and remove them (your entries might be a little different so look around)...
Code: Select all
HKEY_LOCAL_MACHINE\SOFTWARE\Electronic Arts\EA Games\Battlefield 2
HKEY_LOCAL_MACHINE\SOFTWARE\Black Sand Studios\Project Reality
Then reboot your machine and reinstall from fresh.
This should sort the problem IF it was a result of corruption through installing.
Re: Read This If You Have Pr.exe problems
Posted: 2010-03-10 16:19
by SnipingCoward
Usually poeple forget to patch with 1.41 before 1.5. Note that BF2 Patch 1.5 is only incremental and requires 1.41 to be installed first.
Re: Read This If You Have Pr.exe problems
Posted: 2010-03-11 16:48
by gua
Twisted Helix thanks a lot!!! It worked. I can finally play again. Perhaps I'll see you online...laters!!!
Re: Read This If You Have Pr.exe problems
Posted: 2010-03-15 20:30
by random pants
Ok, so I am trying to play PR on a completely fresh install....
I install BF2, then patch to 1.41. Restart my computer.
Install 1.5 then restart.
Install PR .9 part 1 then part 2.
When I try to launch the game from the desktop icon, the PR screen pops up then it says "PR.exe has stopped working"
I have already tried uninstalling and reinstalling everything. I have tried launching PR from inside the EA GAMES/mods/pr folder. Same result.
I can play BF2 fine.
I've read most of this sticky but haven't been able to find much help.
Any help/suggestions are greatly appreciated. Thanks.
Re: Read This If You Have Pr.exe problems
Posted: 2010-03-21 08:53
by 69_Shorty_69
random pants wrote:Ok, so I am trying to play PR on a completely fresh install....
I install BF2, then patch to 1.41. Restart my computer.
Install 1.5 then restart.
Install PR .9 part 1 then part 2.
When I try to launch the game from the desktop icon, the PR screen pops up then it says "PR.exe has stopped working"
I have already tried uninstalling and reinstalling everything. I have tried launching PR from inside the EA GAMES/mods/pr folder. Same result.
I can play BF2 fine.
I've read most of this sticky but haven't been able to find much help.
Any help/suggestions are greatly appreciated. Thanks.
Same here, ironically I've just removed the dust from my BF2 DVD case and reinstalled it to give Project Reality a try but no such luck.
For reference here are system specs:
O/S: Windows 7 Ultimate 32 Bit
CPU: Intel Pentium DUAL CPU T2330 @ 1.60Ghz 1.60 Ghz
RAM: 4,00 Gb
VGA: Nividia GeForce 8400M GS
Help me out here please
Re: Read This If You Have Pr.exe problems
Posted: 2010-03-21 16:35
by Blackheartedone
random pants wrote:Ok, so I am trying to play PR on a completely fresh install....
I install BF2, then patch to 1.41. Restart my computer.
Install 1.5 then restart.
Install PR .9 part 1 then part 2.
When I try to launch the game from the desktop icon, the PR screen pops up then it says "PR.exe has stopped working"
I have already tried uninstalling and reinstalling everything. I have tried launching PR from inside the EA GAMES/mods/pr folder. Same result.
I can play BF2 fine.
I've read most of this sticky but haven't been able to find much help.
Any help/suggestions are greatly appreciated. Thanks.
Same thing for me
Here's what it says:
Description:
Stopped working
Problem signature:
Problem Event Name: CLR20r3
Problem Signature 01: pr.exe
Problem Signature 02: 0.9.0.0
Problem Signature 03: 4b583ec1
Problem Signature 04: mscorlib
Problem Signature 05: 2.0.0.0
Problem Signature 06: 4a27471d
Problem Signature 07: 349e
Problem Signature 08: 119
Problem Signature 09: System.IO.DirectoryNotFound
OS Version: 6.1.7600.2.0.0.768.3
Locale ID: 4105
Re: Read This If You Have Pr.exe problems
Posted: 2010-03-21 17:12
by bad_nade
Blackheartedone wrote:Same thing for me
Here's what it says:
Description:
Stopped working
Problem signature:
Problem Event Name: CLR20r3
Problem Signature 01: pr.exe
Problem Signature 02: 0.9.0.0
Problem Signature 03: 4b583ec1
Problem Signature 04: mscorlib
Problem Signature 05: 2.0.0.0
Problem Signature 06: 4a27471d
Problem Signature 07: 349e
Problem Signature 08: 119
Problem Signature 09: System.IO.DirectoryNotFound
OS Version: 6.1.7600.2.0.0.768.3
Locale ID: 4105
Try to start regular BF2 and retrieve or create your profile(s) before starting PR.
Re: Read This If You Have Pr.exe problems
Posted: 2010-03-22 21:01
by Blackheartedone
clueless_noob wrote:Try to start regular BF2 and retrieve or create your profile(s) before starting PR.
I did that, still doesn't work, same codes
If that helps, whenever i try to play BF2 i get kicked by punkbuster (i updated it and it didn't do anything)
Re: Read This If You Have Pr.exe problems
Posted: 2010-03-26 23:16
by Sgt.Parallax
random pants wrote:Ok, so I am trying to play PR on a completely fresh install....
I install BF2, then patch to 1.41. Restart my computer.
Install 1.5 then restart.
Install PR .9 part 1 then part 2.
When I try to launch the game from the desktop icon, the PR screen pops up then it says "PR.exe has stopped working"
I have already tried uninstalling and reinstalling everything. I have tried launching PR from inside the EA GAMES/mods/pr folder. Same result.
I can play BF2 fine.
I've read most of this sticky but haven't been able to find much help.
Any help/suggestions are greatly appreciated. Thanks.
I'm running into the same problem
BF2 Plays fine, just PR gives me that stupid "PR.EXE has Stopped Working" pop-up when I double click the icon...
My System...
Vista Home Premium (64-Bit)
Intel Core 2 Duo P8400
4GB Ram
NVidia G-Force 9600M GT
Re: Read This If You Have Pr.exe problems
Posted: 2010-03-26 23:29
by Twisted Helix
Blackheartedone wrote:I did that, still doesn't work, same codes
In that case, it is likely that your registry installation for BF2 is corrupt. Do a search on this forum for 'registry' 'BF2' 'pr.exe'. It should bring up a few results as I have discussed this several times.
Re: Read This If You Have Pr.exe problems
Posted: 2010-04-06 11:36
by jednou
Yea I have the same problem guys. I am running PR on Win 7 and it stops working every time. I can run BF2 no problem.
Edit: I've got it to work by launching it through Special Forces > Community > Custom Game
Re: Read This If You Have Pr.exe problems
Posted: 2010-04-11 00:55
by Apache^85
Hi Guys,
I'm not sure if this will solve your problem, but I was having the same issues (Win 7 64 bit) and it solved mine.
Right click on the desktop shortcut, click properties, then 'Compatibility' and check the box next to "Run this program as an administrator'
Fixed my problems right away. Good luck!
Re: Read This If You Have Pr.exe problems
Posted: 2010-04-11 18:02
by novarox4
yeah i have a problem if anybody can help that would be appreciated i have installed Project Reality and when i go to start it up its not full screen but its like a small screen that shows dog tags says PR in the background and it gets to that then it says Pr.exe is not responding for more details please message me or reply to me specifically on this thread thank you your help will be very appreciated.
Re: Read This If You Have Pr.exe problems
Posted: 2010-04-14 00:17
by killme
same with me but after it shows the PR start up image, it then shows the bf2 one also then just closes.
Re: Read This If You Have Pr.exe problems
Posted: 2010-04-14 03:56
by Twisted Helix
The answer is two posts down guys.
Re: Read This If You Have Pr.exe problems
Posted: 2010-04-23 09:30
by Snowy-Rogue
didnt work for me didnt even alow me to change start in and target
Re: Read This If You Have Pr.exe problems
Posted: 2010-05-27 21:53
by Smurf_39
Apache^85 wrote:Hi Guys,
I'm not sure if this will solve your problem, but I was having the same issues (Win 7 64 bit) and it solved mine.
Right click on the desktop shortcut, click properties, then 'Compatibility' and check the box next to "Run this program as an administrator'
Fixed my problems right away. Good luck!
spot on, that fixed it for me thanks
Re: Read This If You Have Pr.exe problems
Posted: 2010-07-12 20:07
by Krystion
Edit:
ok i got it working
i used FDM to re download from a differant source
and patched to 1.41 then 1.50
not sure wich one fixed it but it works now yay
Hi.
i have installed bf2 and it worked fine. then i installed pr. when i try to run it i see the pr dogtags then a bf2 screen and my screen goes black then back to the desktop with no error report its like nothing happend. since i installed pr bf2 is giving me the same problem.
i have spent the last 2 days reading this thread and trying the sollutions that i could understand with no progress. so now i have got to the end of the thread and need to ask for help.
please help me before i pull out all my hair lol
im a computer noob so i will try to tell you every thing i think that is important
i am running windows 7 home premium 64-bit
i have set bf2 and PR to run as admin and given them full controll
Bf2.exe
target: "C:\Program Files (x86)\EA GAMES\Battlefield 2\BF2.exe" +menu 1 +fullscreen 1
start in: "C:\Program Files (x86)\EA GAMES\Battlefield 2"
pr.exe
target: "C:\Program Files (x86)\EA Games\Battlefield 2\mods\pr\pr.exe"
start in: "C:\Program Files (x86)\EA GAMES\Battlefield 2\mods\pr"
pr registry
Hkey_Local_Machine\software\Wow6432Node\black sand studios\Project\reality
in here i see three things
(default) REG_SZ (value not set)
installdir REG_SZ C:\Program Files (x86)\EA GAMES\Battlefield 2
Version REG_SZ Full 0917
Bf2 registry
Hkey_Local_Machine\software\Wow6432Node\Electronic Arts\EA GAMES\Battlefield 2
(default) REG_SZ (value not set)
installdir REG_SZ C:\Program Files (x86)\EA GAMES\Battlefield 2
Language REG_SZ English
Locale REG_SZ en_US
Hkey_Local_Machine\software\Wow6432Node\Electronic Arts\EA GAMES\Battlefield 2\ergc
(default) REG_SZ ************* (i think this was the authentication code can post if needed)
Hkey_Local_Machine\software\Wow6432Node\Electronic Arts\EA GAMES\Battlefield 2\wdc
(default) REG_SZ false
if there is anything else i need to post just tell me how to find it and i will post it
thanks
Edit: i downloaded 1.5 patch and it wont install it says i have a newer version but i didnt patch the game at all so im not sure it is getting auto patched on installation maybe
ahhh stress gota play this americas army 3 just doesnt cut it
please help S.o.S
Re: Read This If You Have Pr.exe problems
Posted: 2010-07-21 03:17
by puppetmaster532
when ever i try to run project reality 0.917 it says PR.EXE has stoped working the second it pops up does anyone know how to fix this?