Page 6 of 8

Re: [WEAPON] M60 7.62x51mm GPMG

Posted: 2010-03-04 04:42
by Salmonella
even if no one had noticed, I fixed the mount problem
<object width="800" height="480"><param name="movie" value="http://www.youtube.com/v/fNLEoHlafGg&hl ... ram><param name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src="http://www.youtube.com/v/fNLEoHlafGg&hl=pt_BR&fs=1&" type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="800" height="480"></embed></object>[/youtube]

and finally tested it into the game.
<object width="800" height="480"><param name="movie" value="http://www.youtube.com/v/TlQTmRn7xLk&hl ... ram><param name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src="http://www.youtube.com/v/TlQTmRn7xLk&hl=pt_BR&fs=1&" type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="800" height="480"></embed></object>[/youtube]

now with the normal and export done I'm about to cross it from the "to do list"

Re: [WEAPON] M60 7.62x51mm GPMG

Posted: 2010-03-04 05:04
by Rhino
very nice work :)

Re: [WEAPON] M60 7.62x51mm GPMG

Posted: 2010-03-04 10:57
by MCI
Looks great mate! :grin:

Re: [WEAPON] M60 7.62x51mm GPMG

Posted: 2010-03-04 11:45
by Adetter
I think thats US should have to MG-kits, HMG and LMG.
HMG- M60
LMG- M249 or which the current is.

Re: [WEAPON] M60 7.62x51mm GPMG

Posted: 2010-03-04 12:15
by Maxfragg
@Adetter no, if American soldiers are using a heavyer MG today, than they use the M240, the M60 isn't used by the US anymore (apart form a few mounted ones

Re: [WEAPON] M60 7.62x51mm GPMG

Posted: 2010-03-04 13:35
by Amok@ndy
great work and grats to R-Con :)

Re: [WEAPON] M60 7.62x51mm GPMG

Posted: 2010-03-04 17:28
by Outlawz7
I think you'll be everyone's hero if you put that thing on the Huey :D (and record your vids with sound :p )

Re: [WEAPON] M60 7.62x51mm GPMG

Posted: 2010-03-05 03:07
by FelipeFR
[R-CON]Outlawz wrote:(and record your vids with sound :p )
Yeah, just sent him a message that may help with this.

Re: [WEAPON] M60 7.62x51mm GPMG

Posted: 2010-03-05 03:48
by Froggy
Image


Holy ****, that is amazing. Nice work.

EDIT: I can haz m60 on huey?

Re: [WEAPON] M60 7.62x51mm GPMG

Posted: 2010-03-07 06:11
by Salmonella
Now on Huey and with sound(borrowed from the .50cal)

<object width="640" height="480"><param name="movie" value="http://www.youtube.com/v/EQJ87uj38Fc&hl ... ram><param name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src="http://www.youtube.com/v/EQJ87uj38Fc&hl=pt&fs=1" type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="640" height="480"></embed></object>[/youtube]

theres a few errors in the animation, I think I should reduce the degree of freedom on the pivot.

before someone asks, it isn't official, and not gonna be in the game in the next patch, I made it just for fun..

Re: [WEAPON] M60 7.62x51mm GPMG

Posted: 2010-03-07 06:17
by Rhino
The problem with the IK setup is the gun is far too close to the players chest, in fact it's handles are inside the players chest hehe.

You need to move the gun away from the player, if you look at this mount you will see its mounted on this little rack and then angled away from the door so there is room for the guy to hold it etc :)

Image

Re: [WEAPON] M60 7.62x51mm GPMG

Posted: 2010-03-07 06:20
by ReadMenace
Contact Z-Trooper about the mount ;)

I love you Salmonella.

-REad

Re: [WEAPON] M60 7.62x51mm GPMG

Posted: 2010-03-07 06:37
by Salmonella
[R-DEV]Rhino wrote:The problem with the IK setup is the gun is far too close to the players chest, in fact it's handles are inside the players chest hehe.

You need to move the gun away from the player, if you look at this mount you will see its mounted on this little rack and then angled away from the door so there is room for the guy to hold it etc :)
I thought about it, probably it wont be used, so I didn't spent stoo much time in that

If you noticed my current mount is already on the edge of the chopper, I must create that cilinder mount to move the weapon further.
Another thing I could spend my time if someone say it will be ingame is that super ammo belt

Re: [WEAPON] M60 7.62x51mm GPMG

Posted: 2010-03-07 06:45
by Rhino
[R-CON]Salmonella wrote:I thought about it, probably it wont be used, so I didn't spent stoo much time in that

If you noticed my current mount is already on the edge of the chopper, I must create that cilinder mount to move the weapon further.
Another thing I could spend my time if someone say it will be ingame is that super ammo belt
Well we dont need a M60 mount for our USMC hueys since we need a decent M240 and a M240 mount for them hehe :)

Only if your faction or anouther is going to use a huey with a M60 will it be needed.


Also RM, Z-trooper was working on a Minigun mount but never got it finished.

Re: [WEAPON] M60 7.62x51mm GPMG

Posted: 2010-03-07 07:16
by TrahnLee
I got a mount for that. I know of a mod that has Huey's with M60's that need updated. Also, there are animations that are already done for that version of the M60 that is mounted on a door gun mount. Plus, I know a really good exporter/coder that knows how to work the ik's and setup weapons like that onto door gun mounts. ;)

Re: [WEAPON] M60 7.62x51mm GPMG

Posted: 2010-03-07 07:40
by Rhino
[R-DEV]TrahnLee wrote:I got a mount for that. I know of a mod that has Huey's with M60's that need updated. Also, there are animations that are already done for that version of the M60 that is mounted on a door gun mount. Plus, I know a really good exporter/coder that knows how to work the ik's and setup weapons like that onto door gun mounts. ;)
lol Trahn :p

Re: [WEAPON] M60 7.62x51mm GPMG

Posted: 2010-03-07 14:02
by Wilkinson
[R-DEV]TrahnLee wrote:I got a mount for that. I know of a mod that has Huey's with M60's that need updated. Also, there are animations that are already done for that version of the M60 that is mounted on a door gun mount. Plus, I know a really good exporter/coder that knows how to work the ik's and setup weapons like that onto door gun mounts. ;)
Not gonna lie.
I lolled on this one too hahah

Re: [WEAPON] M60 7.62x51mm GPMG

Posted: 2010-03-07 16:54
by Matheusferri
wow!!! very good job man!

Re: [WEAPON] M60 7.62x51mm GPMG

Posted: 2010-03-07 23:26
by mangeface
'[R-CON wrote:Salmonella;1287921']Now on Huey and with sound(borrowed from the .50cal)

<object width="640" height="480"><param name="movie" value="http://www.youtube.com/v/EQJ87uj38Fc&hl ... ram><param name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src="http://www.youtube.com/v/EQJ87uj38Fc&hl=pt&fs=1" type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="640" height="480"></embed></object>[/youtube]

theres a few errors in the animation, I think I should reduce the degree of freedom on the pivot.

before someone asks, it isn't official, and not gonna be in the game in the next patch, I made it just for fun..
It needs to be, I don't know how many times I've said that the Hueys need door guns, even the rocket Hueys.

Re: [WEAPON] M60 7.62x51mm GPMG

Posted: 2010-03-07 23:46
by Tim270
Out of interest, you seemed to have picked up exporting insanely fast, May I ask how/where you learnt this so fast.