Project Reality Forums


https://forum.realitymod.org/

Custom PR map crash at 100%

https://forum.realitymod.org/viewtopic.php?t=117521

Page 2 of 3

Re: Custom PR map crash at 100%

Posted: 2013-01-09 18:33
by Ason
thanks alot man! Iwant to have 2 East european militia teams, one of them can have russian flag if that is possible to edit in the init.confile :D really appreciate it my friend!

Re: Custom PR map crash at 100%

Posted: 2013-01-09 18:43
by Rabbit
tmp.con
TMP download, place it in your "my_level" folder. current systems do not allow for custom flags to my knowledge.

Re: Custom PR map crash at 100%

Posted: 2013-01-09 19:12
by Ason
gx wrote:tmp.con
TMP download, place it in your "my_level" folder. current systems do not allow for custom flags to my knowledge.
Thx man! :D It worked with all the kits now, but the game still ends after 5 seconds...
Maybe because it's Militia vs Militia ?

Re: Custom PR map crash at 100%

Posted: 2013-01-09 19:19
by Rabbit
Mrslobodan wrote:Thx man! :D It worked with all the kits now, but the game still ends after 5 seconds...
Maybe because it's Militia vs Militia ?
Post your gameplayobjects.con

Re: Custom PR map crash at 100%

Posted: 2013-01-09 19:55
by Ason

Code: Select all

rem ********** Object Spawner **********
rem [ObjectSpawnerTemplate: cpname_test_aas16_shed_ru_jeep]
ObjectTemplate.create ObjectSpawner cpname_test_aas16_shed_ru_jeep
ObjectTemplate.activeSafe ObjectSpawner cpname_test_aas16_shed_ru_jeep
ObjectTemplate.modifiedByUser "Robin"
ObjectTemplate.isNotSaveable 1
ObjectTemplate.hasMobilePhysics 0

rem [ObjectSpawnerTemplate: cpname_test_aas16_houses_us_jeep]
ObjectTemplate.create ObjectSpawner cpname_test_aas16_houses_us_jeep
ObjectTemplate.activeSafe ObjectSpawner cpname_test_aas16_houses_us_jeep
ObjectTemplate.modifiedByUser "Robin"
ObjectTemplate.isNotSaveable 1
ObjectTemplate.hasMobilePhysics 0
ObjectTemplate.setObjectTemplate 2 us_jep_hmmwv

rem [ObjectSpawnerTemplate: cpname_test_aas16_middle_ru_jeep]
ObjectTemplate.create ObjectSpawner cpname_test_aas16_middle_ru_jeep
ObjectTemplate.activeSafe ObjectSpawner cpname_test_aas16_middle_ru_jeep
ObjectTemplate.modifiedByUser "Robin"
ObjectTemplate.isNotSaveable 1
ObjectTemplate.hasMobilePhysics 0

if v_arg1 == host

   rem [ObjectSpawner: cpname_test_aas16_shed_ru_jeep]
   Object.create cpname_test_aas16_shed_ru_jeep
   Object.absolutePosition -357.135/146.685/163.526
   Object.rotation 0.000/0.000/0.000
   Object.setControlPointId 1
   Object.layer 2

   rem [ObjectSpawner: cpname_test_aas16_houses_us_jeep]
   Object.create cpname_test_aas16_houses_us_jeep
   Object.absolutePosition -143.931/150.107/-196.749
   Object.rotation 0.000/0.000/0.000
   Object.setControlPointId 102
   Object.layer 2

   rem [ObjectSpawner: cpname_test_aas16_middle_ru_jeep]
   Object.create cpname_test_aas16_middle_ru_jeep
   Object.absolutePosition -233.666/127.030/63.420
   Object.rotation 0.000/0.000/0.000
   Object.setControlPointId 101
   Object.layer 2

endIf

rem ********** Spawn Points **********
rem [SpawnPointTemplate: cpname_test_aas16_shed_1]
ObjectTemplate.create SpawnPoint cpname_test_aas16_shed_1
ObjectTemplate.activeSafe SpawnPoint cpname_test_aas16_shed_1
ObjectTemplate.modifiedByUser "Robin"
ObjectTemplate.isNotSaveable 1
ObjectTemplate.setSpawnPositionOffset 0/1.25/0
ObjectTemplate.setControlPointId 1

rem [SpawnPoint: cpname_test_aas16_shed_1]
Object.create cpname_test_aas16_shed_1
Object.absolutePosition -358.370/148.208/155.495
Object.rotation 72.119/0.000/0.000
Object.layer 2

rem [SpawnPointTemplate: cpname_test_aas16_houses_1]
ObjectTemplate.create SpawnPoint cpname_test_aas16_houses_1
ObjectTemplate.activeSafe SpawnPoint cpname_test_aas16_houses_1
ObjectTemplate.modifiedByUser "Robin"
ObjectTemplate.isNotSaveable 1
ObjectTemplate.setSpawnPositionOffset 0/1.25/0
ObjectTemplate.setControlPointId 102

rem [SpawnPoint: cpname_test_aas16_houses_1]
Object.create cpname_test_aas16_houses_1
Object.absolutePosition -137.147/150.568/-171.839
Object.rotation -164.699/0.000/0.000
Object.layer 2

rem [SpawnPointTemplate: cpname_test_aas16_middle_1]
ObjectTemplate.create SpawnPoint cpname_test_aas16_middle_1
ObjectTemplate.activeSafe SpawnPoint cpname_test_aas16_middle_1
ObjectTemplate.modifiedByUser "Robin"
ObjectTemplate.isNotSaveable 1
ObjectTemplate.setSpawnPositionOffset 0/1.25/0
ObjectTemplate.setControlPointId 101

rem [SpawnPoint: cpname_test_aas16_middle_1]
Object.create cpname_test_aas16_middle_1
Object.absolutePosition -236.852/127.252/78.965
Object.rotation 118.514/0.000/0.000
Object.layer 2

rem ********** Control Points **********
rem [ControlPointTemplate: cpname_test_aas16_shed]
ObjectTemplate.create ControlPoint cpname_test_aas16_shed
ObjectTemplate.activeSafe ControlPoint cpname_test_aas16_shed
ObjectTemplate.modifiedByUser "Robin"
ObjectTemplate.setNetworkableInfo ControlPointInfo
ObjectTemplate.isNotSaveable 1
ObjectTemplate.hasMobilePhysics 0
ObjectTemplate.hasCollisionPhysics 1
ObjectTemplate.physicsType Mesh
rem -------------------------------------
ObjectTemplate.addTemplate flagpole
rem -------------------------------------
ObjectTemplate.setControlPointName cpname_test_aas16_shed
ObjectTemplate.team -1
ObjectTemplate.controlPointId 1
ObjectTemplate.hoistMinMax 0.2/0.9

rem [ControlPointTemplate: cpname_test_aas16_middle]
ObjectTemplate.create ControlPoint cpname_test_aas16_middle
ObjectTemplate.activeSafe ControlPoint cpname_test_aas16_middle
ObjectTemplate.modifiedByUser "Robin"
ObjectTemplate.setNetworkableInfo ControlPointInfo
ObjectTemplate.isNotSaveable 1
ObjectTemplate.hasMobilePhysics 0
ObjectTemplate.hasCollisionPhysics 1
ObjectTemplate.physicsType Mesh
rem -------------------------------------
ObjectTemplate.addTemplate flagpole
rem -------------------------------------
ObjectTemplate.setControlPointName cpname_test_aas16_middle
ObjectTemplate.controlPointId 101
ObjectTemplate.supplyGroupId 20
ObjectTemplate.hoistMinMax 0.2/0.9

rem [ControlPointTemplate: cpname_test_aas16_houses]
ObjectTemplate.create ControlPoint cpname_test_aas16_houses
ObjectTemplate.activeSafe ControlPoint cpname_test_aas16_houses
ObjectTemplate.modifiedByUser "Robin"
ObjectTemplate.setNetworkableInfo ControlPointInfo
ObjectTemplate.isNotSaveable 1
ObjectTemplate.hasMobilePhysics 0
ObjectTemplate.hasCollisionPhysics 1
ObjectTemplate.physicsType Mesh
rem -------------------------------------
ObjectTemplate.addTemplate flagpole
rem -------------------------------------
ObjectTemplate.setControlPointName cpname_test_aas16_houses
ObjectTemplate.team 1
ObjectTemplate.controlPointId 102
ObjectTemplate.supplyGroupId 1
ObjectTemplate.hoistMinMax 0.2/0.9

if v_arg1 == host

   rem [ControlPoint: cpname_test_aas16_shed]
   Object.create cpname_test_aas16_shed
   Object.absolutePosition -351.313/147.202/157.772
   Object.layer 2

   rem [ControlPoint: cpname_test_aas16_middle]
   Object.create cpname_test_aas16_middle
   Object.absolutePosition -227.847/127.445/74.073
   Object.layer 2

   rem [ControlPoint: cpname_test_aas16_houses]
   Object.create cpname_test_aas16_houses
   Object.absolutePosition -140.218/149.954/-183.065
   Object.layer 2

endIf

CombatAreaManager.use 1
CombatAreaManager.timeAllowedOutside 10.000000
CombatArea.create CombatArea_0_AAS16
CombatArea.min 0.000000/0.000000
CombatArea.max 0.000000/0.000000
CombatArea.addAreaPoint -377.991394/191.274719
CombatArea.addAreaPoint -324.385010/206.615601
CombatArea.addAreaPoint -203.898193/220.060730
CombatArea.addAreaPoint 110.277405/40.910034
CombatArea.addAreaPoint -25.189178/-56.358307
CombatArea.addAreaPoint -22.520386/-182.187500
CombatArea.addAreaPoint -94.045197/-275.006805
CombatArea.addAreaPoint -269.288391/-216.920105
CombatArea.addAreaPoint -424.942413/127.143250
CombatArea.addAreaPoint -376.595459/193.604065
CombatArea.team 0
CombatArea.vehicles 4
CombatArea.layer 2

Re: Custom PR map crash at 100%

Posted: 2013-01-09 19:56
by sylent/shooter
Did you ever run the packing script? The map needs to be packed to play correctly. If you run it in windowed debug mode then please take a picture of the error it shows. Make sure to run everything in the PR_EDIT folder group instead of your normal PR folder.

Secondly I will make a video tutorial covering the basics of creating a map through to the packing and testing of the map this weekend. Hopefully that will put to rest this issue because I see many potential mappers turn away because it's too hard to figure out.

EDIT: Dude what is up witth your GPO.... Gx could you help him out with it or someone else, I'm in a Uni lecture right now...

Re: Custom PR map crash at 100%

Posted: 2013-01-09 20:04
by Rabbit
You set the shed CP to team -1, should be team 2, it also does not have a supply route id number. Team 2 has no where to spawn.

Re: Custom PR map crash at 100%

Posted: 2013-01-09 20:05
by Ason
Alright nice man! Well I got it to work kinda, it all loads fine and after i choose kit I can run around for about 2 seconds then it says "Round is ending..." in the upper left corner( like always when a map is ending) then it show stats etc. I'm pretty sure i set up the editor for PR 100% right. Maybe som value or something with tickets or something, it says Militia has won 35-0 :S
And i got militia vs militia

Re: Custom PR map crash at 100%

Posted: 2013-01-09 20:10
by Ason
gx wrote:You set the shed CP to team -1, should be team 2, it also does not have a supply route id number. Team 2 has no where to spawn.
ahh thanks! :) Will see if it works properly now, is supply route id number = SGID ?

Re: Custom PR map crash at 100%

Posted: 2013-01-09 20:14
by Rabbit
You need to work on your object spawns. They should be more detailed.

Code: Select all

rem [ObjectSpawnerTemplate: cpname_shikotan_island_aas64_fob_kursk_apc]
ObjectTemplate.create ObjectSpawner cpname_shikotan_island_aas64_fob_kursk_apc
ObjectTemplate.activeSafe ObjectSpawner cpname_shikotan_island_aas64_fob_kursk_apc
ObjectTemplate.modifiedByUser "jeff"
ObjectTemplate.isNotSaveable 1
ObjectTemplate.hasMobilePhysics 0
ObjectTemplate.setObjectTemplate 2 ru_apc_btr80
ObjectTemplate.minSpawnDelay 600
ObjectTemplate.maxSpawnDelay 600
ObjectTemplate.spawnDelayAtStart 1
ObjectTemplate.TimeToLive 12000
ObjectTemplate.Distance 100
ObjectTemplate.team 2
ObjectTemplate.teamOnVehicle 1
Reference this.
https://www.realitymod.com/forum/f354-c ... lines.html

I also suggest you re-read AASv4 again.
Be sure to really look at the pictures in aas64
Copy this into your GPO to replace your CP with this.

Code: Select all

rem ********** Control Points **********
rem [ControlPointTemplate: cpname_test_aas16_shed]
ObjectTemplate.create ControlPoint cpname_test_aas16_shed
ObjectTemplate.activeSafe ControlPoint cpname_test_aas16_shed
ObjectTemplate.modifiedByUser "Robin"
ObjectTemplate.setNetworkableInfo ControlPointInfo
ObjectTemplate.isNotSaveable 1
ObjectTemplate.hasMobilePhysics 0
ObjectTemplate.hasCollisionPhysics 1
ObjectTemplate.physicsType Mesh
ObjectTemplate.setControlPointName cpname_test_aas16_shed
ObjectTemplate.team 2
ObjectTemplate.controlPointId 103
ObjectTemplate.supplyGroupId -1
ObjectTemplate.hoistMinMax 0.2/0.9

rem [ControlPointTemplate: cpname_test_aas16_middle]
ObjectTemplate.create ControlPoint cpname_test_aas16_middle
ObjectTemplate.activeSafe ControlPoint cpname_test_aas16_middle
ObjectTemplate.modifiedByUser "Robin"
ObjectTemplate.setNetworkableInfo ControlPointInfo
ObjectTemplate.isNotSaveable 1
ObjectTemplate.hasMobilePhysics 0
ObjectTemplate.hasCollisionPhysics 1
ObjectTemplate.physicsType Mesh
ObjectTemplate.setControlPointName cpname_test_aas16_middle
ObjectTemplate.controlPointId 101
ObjectTemplate.supplyGroupId 20
ObjectTemplate.hoistMinMax 0.2/0.9

rem [ControlPointTemplate: cpname_test_aas16_houses]
ObjectTemplate.create ControlPoint cpname_test_aas16_houses
ObjectTemplate.activeSafe ControlPoint cpname_test_aas16_houses
ObjectTemplate.modifiedByUser "Robin"
ObjectTemplate.setNetworkableInfo ControlPointInfo
ObjectTemplate.isNotSaveable 1
ObjectTemplate.hasMobilePhysics 0
ObjectTemplate.hasCollisionPhysics 1
ObjectTemplate.physicsType Mesh
ObjectTemplate.setControlPointName cpname_test_aas16_houses
ObjectTemplate.team 1
ObjectTemplate.controlPointId 102
ObjectTemplate.supplyGroupId 1
ObjectTemplate.hoistMinMax 0.2/0.9

if v_arg1 == host

   rem [ControlPoint: cpname_test_aas16_shed]
   Object.create cpname_test_aas16_shed
   Object.absolutePosition -351.313/147.202/157.772
   Object.layer 2

   rem [ControlPoint: cpname_test_aas16_middle]
   Object.create cpname_test_aas16_middle
   Object.absolutePosition -227.847/127.445/74.073
   Object.layer 2

   rem [ControlPoint: cpname_test_aas16_houses]
   Object.create cpname_test_aas16_houses
   Object.absolutePosition -140.218/149.954/-183.065
   Object.layer 2

endIf

CombatAreaManager.use 1
CombatAreaManager.timeAllowedOutside 10.000000
CombatArea.create CombatArea_0_AAS16
CombatArea.min 0.000000/0.000000
CombatArea.max 0.000000/0.000000
CombatArea.addAreaPoint -377.991394/191.274719
CombatArea.addAreaPoint -324.385010/206.615601
CombatArea.addAreaPoint -203.898193/220.060730
CombatArea.addAreaPoint 110.277405/40.910034
CombatArea.addAreaPoint -25.189178/-56.358307
CombatArea.addAreaPoint -22.520386/-182.187500
CombatArea.addAreaPoint -94.045197/-275.006805
CombatArea.addAreaPoint -269.288391/-216.920105
CombatArea.addAreaPoint -424.942413/127.143250
CombatArea.addAreaPoint -376.595459/193.604065
CombatArea.team 0
CombatArea.vehicles 4
CombatArea.layer 2

Re: Custom PR map crash at 100%

Posted: 2013-01-09 20:15
by Mineral
what you should do (and what I did) is just open a map you know well. Where you know what kind of vehicles spawn and when, and then load up that map's GPO file. And then see how it is set up. try to copy a similar approach to your vehicles and flags so you get the hang of the way PR maps are done.

Re: Custom PR map crash at 100%

Posted: 2013-01-09 20:18
by Ason
EDIT: Dude what is up witth your GPO.... Gx could you help him out with it or someone else, I'm in a Uni lecture right now...
What is GPO ?

EDIT:nvm.... :P

Re: Custom PR map crash at 100%

Posted: 2013-01-09 20:41
by Ason
GP_MineralWouter wrote:what you should do (and what I did) is just open a map you know well. Where you know what kind of vehicles spawn and when, and then load up that map's GPO file. And then see how it is set up. try to copy a similar approach to your vehicles and flags so you get the hang of the way PR maps are done.
Alright i'll do that :)

Re: Custom PR map crash at 100%

Posted: 2013-01-09 21:53
by lucky.BOY
'[R-DEV wrote:AFsoccer;1852494']There are some things that the editor absolutely requires, such as overgrowth. If you don't get an error, try to create some overgrowth and undergrowth, re-save and try to load it again.
[/LIST]
I dont think this is true, at least I made my test level without any OG or UG and it worked ingame...

Re: Custom PR map crash at 100%

Posted: 2013-01-10 21:42
by CTRifle
Well I had the issue once that it didn't make any overgrowth files and crashed when it attempted to load them

Re: Custom PR map crash at 100%

Posted: 2013-01-12 14:33
by Ason
[R-CON]sylent/shooter wrote:Did you ever run the packing script? The map needs to be packed to play correctly. If you run it in windowed debug mode then please take a picture of the error it shows. Make sure to run everything in the PR_EDIT folder group instead of your normal PR folder.

Secondly I will make a video tutorial covering the basics of creating a map through to the packing and testing of the map this weekend. Hopefully that will put to rest this issue because I see many potential mappers turn away because it's too hard to figure out.

EDIT: Dude what is up witth your GPO.... Gx could you help him out with it or someone else, I'm in a Uni lecture right now...
What do you mean by run everything in my pr_edit folder? so i shouldn't drag it over to normal mods\pr folder?? and what happens if i already did that?

Re: Custom PR map crash at 100%

Posted: 2013-01-13 03:34
by sylent/shooter
I mean it's best to run it in your pr_edit folder, because if you've set everything up properly you'll have a few .exe's in there.

For example all the debugger .exe files are in the pr_edit folder. Nothing bad will happen if you bring it over to the PR folder, but if something WAS to go wrong with the file transfer it could screw up PR and that'd be a big hassle to reinstall and everything. Just easier to run from the pr_edit folder.

Re: Custom PR map crash at 100%

Posted: 2018-09-03 14:22
by dunem666
Apart from Init.com and GPO's....

What else can cause map crash at 100%? The map loads fully but when you click on Squad assignment it CTD's with no error message on window mode.

Re: Custom PR map crash at 100%

Posted: 2018-09-03 14:25
by Outlawz7
Run debugger if you don't get any errors in windowed
https://www.realitymod.com/forum/showth ... ost1936179
All times are UTC
Page 2 of 3

Powered by phpBB® Forum Software © phpBB Limited