Project Reality Forums

Just google image search MTVR. There's tons of shots. I poked around on Oshkosh's site (the manufacturer), and while they build some killer equipment, their marketing photography leaves something to be desired.


At the risk of moving slightly off topic: this is a picture of Oshkosh's 2005 entry into DARPA's Grand Challenge, a competition designed to foster the development of autonomous vehicles. The 2005 TerraMax, built on the 6x6 MTVR, primarily used LIDAR to avoid obstacles ahead. Unfortunately, LIDAR doesn't work so well for detecting shiny or dark objects. Here you see what happens when a 425hp, 29,000lb self-guided monstrosity can't see the somewhat shiny, black minivan stopped in front of it.

Nice. In other, non-automated-car news, I've been working on the wheels.

tose look realy high poly, what is the triangle count so far ? and can i see a wire frame ?

[R-CON]ice_killer wrote:tose look realy high poly, what is the triangle count so far ? and can i see a wire frame ?

Yeah, I imported from Inventor on "high" for vizulation. The following pic is imported on "Low".





Poly/Tri Count=7,685

Granted this is before Optimization, and I'm still undecided on some featured. The mirrors need work, as they are poly hogs. In addition, I can import with higher quality if I want.

Model wise, how do you like it?

Added: 5,000 something polys when I edit the mirrors (Read: I need to optimize it)

Model wise its awesome. It looks very nice.

I'm not a modeler but maybe you can save some polys on the exhaust pipe and on the mounting of the side-mirrors.

Don't think that the have to be like that you can simply make them like the USI truck.

seems like the hood, wheels and the chassis has some real problems in regards to unnecesary polygons (just my opinion)

also the wheels look awesome but i think you should save some of the polygons from the 3 small half rings on each wheel and just have them textured instead, and then decrease the rounding of the wheels (should save a lot of polygons) but seriously you should learn to use
3dsmax better after my opinion (just to avoid having to doing the big clean up job afterwards)

have only tried to model one model myself and it's still in the works, but from my experiences from it i think these were the biggest issues. but only talking from my own point of view and we all got different ways to model (which makes every model unique tbh)

motherdear wrote:seems like the hood, wheels and the chassis has some real problems in regards to unnecesary polygons (just my opinion)

also the wheels look awesome but i think you should save some of the polygons from the 3 small half rings on each wheel and just have them textured instead, and then decrease the rounding of the wheels (should save a lot of polygons) but seriously you should learn to use
3dsmax better after my opinion (just to avoid having to doing the big clean up job afterwards)

have only tried to model one model myself and it's still in the works, but from my experiences from it i think these were the biggest issues. but only talking from my own point of view and we all got different ways to model (which makes every model unique tbh)

I don't want to learn 3DS Max, as I am already very familiar with Inventor, and it imports fine. Plus, I am not a modeler for life.

In regards to polygons, I want to keep the undercarriage as the truck is high off the ground, and as such it must look decent under the back as well. In regards to the wheels, good call. The hood, its nice in round in real life.


As said before I am using a CAD program and them import into 3DS Max. It isn't the best use, but hey! Its not how you do it but the end result that counts. Plus I still need to do poly optimization.

Thanks for your comments.

BTW, I need a texture artist: https://www.realitymod.com/forum/f66-co ... eeded.html


Anyone up to it?

It looks good, but I'm kind of worried about some jagged edges on the hood's back and side, but that could be because you down-sized the picture. No matter, good job.

EOD_Security-2252 wrote:It looks good, but I'm kind of worried about some jagged edges on the hood's back and side, but that could be because you down-sized the picture. No matter, good job.

Thanks. I still need to poly-optimize and add more detail

Tofurkeymeister wrote:Thanks. I still need to poly-optimize and add more detail

I think your fine on details

Tomato_With_A_Rifle wrote:I think your fine on details

I don't know, that USI truck is pretty good...

However, texturing will be the deciding factor on quality.

Thought this might help with the undercarriage:

Gallery/Automotive | Luminova | Visual Technology

Here's more pics (click on the pic of the camera):

http://www.jedsite.info/transport-mike/ ... chive.html

Been a while since last post... you know, Olympics and stuff.

Anyways, here is my "custom" truck bed I am working on. It is custom as there are WAY to many variations on the MTVR, I don't want the standard enclosed one for gameplay reasons, and this most mimics that of the current truck.

Update: I got a UV mapper, now all I need is a skinner

seems like we should exchange some parts, like the wheels you got i could use for my truck and my truckbed and other small stuff is already done.

Update coming soon!

Looking forward to it.

looks great, just the big thing underneath the truck, whatever that is called

Looking good man,you going to make it closed top like in the pic. on the first post?It'd be tight if it was closed top.

Looks good, but why wood in the back?
Why not like this?

Or

I just can't ever think of seeing an MTVR with wood, that's all.