Re: [New for v1.0] Which level of graphics settings do you play?
Posted: 2014-03-30 14:20
You don't go black and white with a single card either.
Project Reality Forums
[New for v1.0] Which level of graphics settings do you play?
Page 3 of 4
Re: [New for v1.0] Which level of graphics settings do you play?
Posted: 2014-03-31 23:15
Ya i dont go black and white with a single card. I sued to before 1.0. I thought they just changed it. I still use the term "black and white" though.
Re: [New for v1.0] Which level of graphics settings do you play?
Posted: 2014-04-28 12:10
wow if i play the game on high it would lag less when i play it at low
Re: [New for v1.0] Which level of graphics settings do you play?
Posted: 2014-04-29 07:53
Terrain Quality: High
Effects Quality: Medium
Geometry Quality: High
Texture Quality: High
Lighting Quality: High
Dynamic Shadows: Medium
Dynamic Light: Medium
Texture Filtering: High
Display: 1366x768@60Hz
Anti-Aliasing: 2x
Getting around the 30 FPS but when i look at a helicopter taking of my frames getting raped or when i aim with a optic on some maps like Saaremaa!
Here are my shitty PC specs!
Effects Quality: Medium
Geometry Quality: High
Texture Quality: High
Lighting Quality: High
Dynamic Shadows: Medium
Dynamic Light: Medium
Texture Filtering: High
Display: 1366x768@60Hz
Anti-Aliasing: 2x
Getting around the 30 FPS but when i look at a helicopter taking of my frames getting raped or when i aim with a optic on some maps like Saaremaa!
Here are my shitty PC specs!
Re: [New for v1.0] Which level of graphics settings do you play?
Posted: 2014-04-29 20:03
everything is on high
Re: [New for v1.0] Which level of graphics settings do you play?
Posted: 2014-08-10 08:52
My settings:
I also applied these settings too : https://www.realitymod.com/forum/f112-pr-bf2-tales-front/124625-pr-bf2-guide-best-possible-graphics-nvidia-gpu.html
And on some maps my FPS looks normal. But in some other maps (+ when look at smokes) my FPS drops so much.
I'm consufed which option is better for me and heard that if I set my settings higher in stead of lower my FPS will be better.
So , waiting for your hand to get rid of this FPS problem. I don't need best graphics but I need graphics that don't effect my gameplay with a good FPS.
Save me guyz
Code: Select all
System Information
------------------
Operating System: Microsoft Windows 8.1 Pro (6.3.9600)
Architecture: 64-bit
Current Culture: English (United States)
Motherboard: Acer JM50-MV
Processor: Intel(R) Core(TM)2 Duo CPU T6600 @ 2.20GHz (Physical: 2, Logical: 2)
Memory: 4.00 GB
DIMM Modules: M1: 2.00 GB @ 800 MHz
M2: 2.00 GB @ 800 MHz
Page File: 6.69 GB
.NET Framework: 4.5.1, Runtime: 4.0.30319.34014
Display Information
-------------------
Display Device(s): Generic PnP Monitor on NVIDIA GeForce GT 240M
Display Mode(s): 1366 x 768 (32 bit) @ 60 Hz
Driver Version: 9.18.13.4052 (340.52)
Display Memory: 1024.00 MB
Multisampling: 2, 4, 8
DPI: 96 (100%)
Audio Information
-----------------
Primary Playback: Speakers (Realtek High Definiti
Primary Recording: Microphone (Realtek High Defini
Open AL Renderer: Software
EAX: True
EAX 1.0: False
EAX 2.0: True
EAX 3.0: False
EAX 4.0: False
EAX 5.0: False
X-RAM: False
Disk Information
----------------
Install Path: C:\Program Files (x86)\EA GAMES\Battlefield 2
Free: 22.20 GB, Total: 88.03 GB, FS: NTFS, SSD: False
Mod Path: C:\Program Files (x86)\EA GAMES\Battlefield 2\mods\pr
Free: 22.20 GB, Total: 88.03 GB, FS: NTFS, SSD: False
Profiles Path: C:\Users\sharK\Documents\ProjectReality\Profiles
Free: 22.20 GB, Total: 88.03 GB, FS: NTFS, SSD: False
Update DL Path: C:\Users\sharK\AppData\Local\Project Reality\Project Reality BF2\Downloads
Free: 22.20 GB, Total: 88.03 GB, FS: NTFS, SSD: False
Update Log Path: C:\Users\sharK\AppData\Local\Project Reality\Project Reality BF2\UpdateLogs
Free: 22.20 GB, Total: 88.03 GB, FS: NTFS, SSD: False
Game Information
----------------
Installed Mods: bf2, pr, xpack
Current Mod: pr
BF2 Version: BF2 1.5
PR Version: 1.2.1.0
Language: english
Debug Available: False
Large Address: True
Supported Hardware: None
Profile Information
-------------------
Profile 0001: akilmaf
Type: Online
Last Used Profile: True
View Intro: False
Fullscreen: True
Display Mode: 1366x768@60Hz
Display Mode Valid: True
Graphics Scheme: Custom
Multisampling: Off
VSync: False
Terrain Quality: High
Effects Quality: Medium
Geometry Quality: High
Texture Quality: High
Lighting Quality: High
Dynamic Shadows: High
Dynamic Lights: High
Texture Filtering: High
Audio Provider: Software
Provider Valid: True
Audio Quality: Medium
EAX: True
And on some maps my FPS looks normal. But in some other maps (+ when look at smokes) my FPS drops so much.
I'm consufed which option is better for me and heard that if I set my settings higher in stead of lower my FPS will be better.
So , waiting for your hand to get rid of this FPS problem. I don't need best graphics but I need graphics that don't effect my gameplay with a good FPS.
Save me guyz
Re: [New for v1.0] Which level of graphics settings do you play?
Posted: 2014-08-11 08:34
Asus G55V
Win 8
Intel I7 - 3630qm 2.4GHz
12 Gb RAM
Nvidia Geforce GTX 660M 2Gb
I play with all settings on high at 1080p, get between 45 and 60 fps.
Sometimes the fps drops to 20-25 for a second, but that's it.
Reminder: Windows 8 sucks for older games.
Win 8
Intel I7 - 3630qm 2.4GHz
12 Gb RAM
Nvidia Geforce GTX 660M 2Gb
I play with all settings on high at 1080p, get between 45 and 60 fps.
Sometimes the fps drops to 20-25 for a second, but that's it.
Reminder: Windows 8 sucks for older games.
Re: [New for v1.0] Which level of graphics settings do you play?
Posted: 2014-08-11 10:02
I'm surprised you can even play with windows 8.Raphavenger wrote:Asus G55V
Reminder: Windows 8 sucks for older games.
If i play on multiplayer, which is most of the time, i will play at the lowest settings. (Because of the other hundred people playing)
Re: [New for v1.0] Which level of graphics settings do you play?
Posted: 2014-08-18 01:22
Unless your rig is like 10 years old or is a budget laptop that's not meant for gaming, it should have no problem running PR. Here's a shot of the ultra-budget rig I built last year that literally doesn't even have a case (the board just sits on top of the box it came in):
I play 1920x1080 with everything maxed out and 8x AA and have never run into a situation where FPS was a problem. I haven't tried it with SweetFX yet, but I plan to.
I play 1920x1080 with everything maxed out and 8x AA and have never run into a situation where FPS was a problem. I haven't tried it with SweetFX yet, but I plan to.
Do you have the right drivers installed? Sometimes with older or low-end hardware you'll actually have better performance if you use an older driver version. If you're following that guide and using SweetFX, it might just be too much for your card to handle. Just get rid of SweetFX and it'll run butter smooth and still look decent.akilmaf wrote:My settings:
--stuff--
I also applied these settings too : https://www.realitymod.com/forum/f112-pr-bf2-tales-front/124625-pr-bf2-guide-best-possible-graphics-nvidia-gpu.html
And on some maps my FPS looks normal. But in some other maps (+ when look at smokes) my FPS drops so much.
I'm consufed which option is better for me and heard that if I set my settings higher in stead of lower my FPS will be better.
So , waiting for your hand to get rid of this FPS problem. I don't need best graphics but I need graphics that don't effect my gameplay with a good FPS.
Save me guyz
Re: [New for v1.0] Which level of graphics settings do you play?
Posted: 2014-08-25 12:36
I can't play PR...Yet. I'm getting a new machine in 1-2 weeks.
Specs:
Motherboard: ASUS H81M-K
CPU: Intel Core i5 4440 3.1 GHz
GPU: Nvidia GeForce GTX 650 1GB DDR5
Memory: Kingston HyperX 8GB DDR3 1600Mhz
So, will I run it fine on this rig?
Specs:
Motherboard: ASUS H81M-K
CPU: Intel Core i5 4440 3.1 GHz
GPU: Nvidia GeForce GTX 650 1GB DDR5
Memory: Kingston HyperX 8GB DDR3 1600Mhz
So, will I run it fine on this rig?
Re: [New for v1.0] Which level of graphics settings do you play?
Posted: 2014-08-25 15:49
operativac wrote:I can't play PR...Yet. I'm getting a new machine in 1-2 weeks.
Specs:
Motherboard: ASUS H81M-K
CPU: Intel Core i5 4440 3.1 GHz
GPU: Nvidia GeForce GTX 650 1GB DDR5
Memory: Kingston HyperX 8GB DDR3 1600Mhz
So, will I run it fine on this rig?
I run the game flawlessly and my specs are pretty similar to yours.
Motherboard: Gigabyte Technology Co., Ltd. GA-78LMT-USB3
Processor: AMD FX(tm)-4130 Quad-Core Processor 3.80 GHz
GPU:AMD Radeon HD 6670 1GB GDDR5
Memory: CORSAIR Vengeance 8.00 GB DDR3 1600Mhz
these are my settings:
Display Mode: 1920x1080@60Hz
Display Mode Valid: True
Graphics Scheme: High
Multisampling: 8x
Terrain Quality: High
Effects Quality: High
Geometry Quality: High
Texture Quality: High
Lighting Quality: High
Dynamic Shadows: High
Dynamic Lights: High
Texture Filtering: High
Audio Provider: Software
Provider Valid: True
Audio Quality: High
Re: [New for v1.0] Which level of graphics settings do you play?
Posted: 2014-08-25 16:41
Thanks man. 
Re: [New for v1.0] Which level of graphics settings do you play?
Posted: 2014-08-25 17:18
operativac wrote:Thanks man.
Re: [New for v1.0] Which level of graphics settings do you play?
Posted: 2014-08-25 18:27
I run the game full low (I'll post resolution later) with 80% view distance at 20-25 fps depending on the map and what I am looking at.
Smoke really doesn't lag me for some reason. Another thing is for some reason I run the game better at higher resolutions than at lower ones.
Smoke really doesn't lag me for some reason. Another thing is for some reason I run the game better at higher resolutions than at lower ones.
Re: [New for v1.0] Which level of graphics settings do you play?
Posted: 2014-08-25 21:36
I used to play 0.98 with 17 constant FPS. Maybe a little higher sometimes. But then one time I was playing Kashan skirmish and got 30 FPS, and I was like:"What magic is this? Is this how the others play?". I planned to get a new PC but then shit happened, but now I'm getting one and there will be no happier person than me when I load up PR.Fir3w411 wrote:I run the game full low (I'll post resolution later) with 80% view distance at 20-25 fps depending on the map and what I am looking at.
Smoke really doesn't lag me for some reason. Another thing is for some reason I run the game better at higher resolutions than at lower ones.
Re: [New for v1.0] Which level of graphics settings do you play?
Posted: 2014-08-27 14:16
Never really noticed it, I always assumed I would have medium (as PR is quite performance heavy). But apparantly my custom PC is able to handle it high.
Re: [New for v1.0] Which level of graphics settings do you play?
Posted: 2014-11-04 12:53
Actually I went down to extreme-low settings since v1.0. I played v0.9** on high, around 30fps and not I get 16fps on some maps.
Re: [New for v1.0] Which level of graphics settings do you play?
Posted: 2014-12-14 17:44
Medium/Low because I play ProjectReality with my Asus Notbook R202CA 
Re: [New for v1.0] Which level of graphics settings do you play?
Posted: 2014-12-28 15:35
You should probably try to run some parameters on high or medium, to see how it works out.Fir3w411 wrote:I run the game full low (I'll post resolution later) with 80% view distance at 20-25 fps depending on the map and what I am looking at.
Smoke really doesn't lag me for some reason. Another thing is for some reason I run the game better at higher resolutions than at lower ones.
Re: [New for v1.0] Which level of graphics settings do you play?
Posted: 2015-01-03 18:31
Although I don't have that computer anymore (specs on my page), I tried what you said when I did have it and no good results came of it.StevePl4y5 wrote:You should probably try to run some parameters on high or medium, to see how it works out.