Page 5 of 13
Re: [Vehicle] CV9030 [WIP]
Posted: 2008-10-20 19:39
by Priby
Doesnt the Abrams barrel move up a little when you try to aim like that.
Re: [Vehicle] CV9030 [WIP]
Posted: 2008-10-20 19:51
by Rhino
Priby wrote:Doesnt the Abrams barrel move up a little when you try to aim like that.
nope, never noticed it before but it also has the same problem as the CR2.
Thou in vBF2 it probably can't aim down as far as it can in PR since we have given each tank there realistic elevation on there main gun.
Re: [Vehicle] CV9030 [WIP]
Posted: 2008-10-21 14:45
by Waaah_Wah
CR2 looks utterly retarded when you more the turret all the way back and all the way down. The turret is then inside the back of the tank
But last time i saw this, the turret was completely "burried" inside the back of the tank. Looked much worse than on that pic.
Re: [Vehicle] CV9030 [WIP]
Posted: 2008-10-21 14:54
by Rhino
Waaah_Wah wrote:CR2 looks utterly retarded when you more the turret all the way back and all the way down. The turret is then inside the back of the tank
But last time i saw this, the turret was completely "burried" inside the back of the tank. Looked much worse than on that pic.
ye you could aim lower if you wanted I just had it so it showed the top of the turret so it could be seen easily.
Re: [Vehicle] CV9030 [WIP]
Posted: 2008-10-21 15:32
by hall0
Its like in the good old times with the bf42 tiger. The first tank in the bf series which could kill them self
Re: [Vehicle] CV9030 [WIP]
Posted: 2008-10-23 13:44
by FastWinston
Ok, this is the final render of the CV9030N, the model has 10 049 tris. If anybody sees somehing thats wrong (either with the modeling or in a realistic sense) shout out now, because I will soon head down to my pre-exam study cave for some hard on studying befor the exams, and will not be modeling until christmas. I have not begun with the interior and will not be able to do them untill after the exams
Re: [Vehicle] CV9030 [WIP]
Posted: 2008-10-23 13:57
by arjan
Good job
!
me likez
Re: [Vehicle] CV9030 [WIP]
Posted: 2008-10-23 15:35
by johnandreas
Looks good!
Re: [Vehicle] CV9030 [WIP]
Posted: 2008-10-23 15:56
by Polka
WANTS.
Re: [Vehicle] CV9030 [WIP]
Posted: 2008-10-23 16:19
by hall0
Realy nice
Re: [Vehicle] CV9030 [WIP]
Posted: 2008-10-23 22:36
by hx.bjoffe
An excellent piece of work, Winston!
Good job.
Re: [Vehicle] CV9030 [WIP]
Posted: 2008-10-24 07:50
by halvor1
Holy shi t really nice fast just send them through msn
Re: [Vehicle] CV9030 [WIP]
Posted: 2008-10-24 08:17
by Glimmerman
FastWinston wrote:Ok, this is the final render of the CV9030N, the model has 10 049 tris. If anybody sees somehing thats wrong (either with the modeling or in a realistic sense) shout out now, because I will soon head down to my pre-exam study cave for some hard on studying befor the exams, and will not be modeling until christmas. I have not begun with the interior and will not be able to do them untill after the exams
Looks awesome man
Can you make the Dutch version with the 35mm Bushmaster canon now?
Re: [Vehicle] CV9030 [WIP]
Posted: 2008-10-24 08:30
by FastWinston
Like I'v said, I wont be able to model anything until my exams are finished (in the middle of desember), but if you still want/need me to, I can model it then
Thank you all for the positive feedback and comments, that's realy nice!!
Re: [Vehicle] CV9030 [WIP]
Posted: 2008-10-24 09:20
by Nickbond592
very very nice winston ! looks beautiful
Re: [Vehicle] CV9030 [WIP]
Posted: 2008-10-24 09:25
by Glimmerman
FastWinston wrote:Like I'v said, I wont be able to model anything until my exams are finished (in the middle of desember), but if you still want/need me to, I can model it then
Thank you all for the positive feedback and comments, that's realy nice!!
Sure no problem
Re: [Vehicle] CV9030 [WIP]
Posted: 2008-10-26 16:24
by FastWinston
Article
I did hear about this from my friend in TMBN some time ago, but now it seems they are changing almost every CV90 to the CV90 RS standard, this may force some changes to my model. But I think I'l wait until I have some photo evidence of the new features... But johanandreas, you might know some more about this?
Re: [Vehicle] CV9030 [WIP]
Posted: 2008-10-26 18:00
by johnandreas
No need to change anything. When these changes to the CV9030 are final, PR will be in v8. in BF4.
Anyway, the way I see it, the RS is a command-/reconnaissance vehicle, and is replacing the footsoldiers with an advanced sensor. The big change is in mk III with a larger engine (hp:weight ratio) and a Hunter/Killer capability.
And some other goodies.
Re: [Vehicle] CV9030 [WIP]
Posted: 2008-10-26 18:57
by FastWinston
I`w heard it has a RCWS instead of the squad leaders cupola and a combined rear hatch and door instead of that old, stupidly heavy door, or is that some kind of secret?
Re: [Vehicle] CV9030 [WIP]
Posted: 2008-10-28 13:56
by Severlohi
FastWinston wrote:Ok, I have a problem with the model. The barrel goes straight through the squad-leaders cupola in the rear of the model, when you swing the turret arround. How can I fix/overcome that? The turret will turn on a more slanted axis then shown in the render, so the turret may pass through a bit higher on the cupola, but still pass through it...
You can also se my atempt at making the cloth at the end of the barrel, how can I improve it? It's only a plane in 5x5, with the vertecies messed arround a bit.
Rendering of the issue:
At tower clock 4 the cannon rises automaticly and when it comes near of sql cupola. Turret lowers when its on 8 o´clock. So u cant shoot in same degrees as in front but if target is higher than your chassis, gun control unit lets u to shoot it.