Page 1 of 1

[0973] British AAV stuck on a bridge

Posted: 2011-09-12 14:05
by Bufl4x
Description:
The british Anti Air Vehicle gets stuck on a certain type of bridge.

Steps to Reproduce:
Load up Shijia or any other map with the same bridge, and try to cross it with the AAV close to the railing.
The vehicle will slow down and will be unable to move eventually.


Screenshots
http://screenshot.xfire.com/s/117828358-4.jpg
http://screenshot.xfire.com/s/117828364-4.jpg

After taking the first screenshot we tried to push the AAV from the rear with the Warrior, it just sat there like a rock.
Then we pushed it from the front and managed to move it without any resistance.
Other vehicles had no problem crossing this bridge.

Tested On:
Shijia Valley AAS-64, TacticalGamer.com PR v0.973
Shijia Valley AAS-64, local server

Re: [0973] British AAV stuck on a bridge

Posted: 2011-09-19 16:08
by mattnett1
It looks like he is stuck in between the posts.

Re: [0973] British AAV stuck on a bridge

Posted: 2012-01-09 20:12
by My_Self
Happens when trying to cross a CSB with a British AAV on Shija Valley, as well.

Re: [0973] British AAV stuck on a bridge

Posted: 2012-01-09 23:12
by Stealthgato
The Stormer AAV has been broken since .96, it was fine in .95 but then something happened and it got goof'd.

Re: [0973] British AAV stuck on a bridge

Posted: 2012-01-09 23:37
by AFsoccer
We're looking into it. :)

Re: [0973] British AAV stuck on a bridge

Posted: 2013-05-07 07:23
by Rhino
This should now be fixed along with the Stormer taking terrain damage :)