Page 1 of 1

Muttrah parking doors closed ?)

Posted: 2012-06-06 16:21
by Kevokpo
Description:
Depending on your distance and angle you see the parking building on Muttrah or any map that has this building (Gaza Beach too) the corner entrance seems to be closed and you cannot see what is inside unless you zoom in with you gun but sometimes you have an ironsighted or red dot sight and you can't zoom in so you are not able to see if there is an enemy standing in there or not. This only with textures, lights terrain and texture filtering on low or deactivated.

Steps to Reproduce:
Stand close (about 30 m away) to a corner entrance of the parking building and you will see the door is closed go closer and it will "open"

Screenshots/Video:
Image
Image
Image
Image
I'm uploading detailed videos of this bug/glitch as they finish uploading I will put the link here
as you can see if you are far enough you cannot see if there is an enemy in there because his name does not pop up. This didn't happened, at least not to me, in PR 0.95.

Tested On:
Muttrah City Skirmish, Local, PR 0973
Gaza Beach Skirmish, Local, PR 0973

Video Settings (if needed):
My GFx card is GeForce 210 1GB, 2GB of RAM, BF2 :P R settings AA 2x, distance vision max, effects high, all the rest on low.

Re: Muttrah parking doors closed ?)

Posted: 2012-06-08 17:18
by qs-racer
Hi mate,
Strange setting to set effect on high and else on low.
It could be better to play with effect low and all on medium (expect shadows and ligth on low if you got a bad computer).

And it should solve your problem :)

Nevermind, thanks for your report.

Re: Muttrah parking doors closed ?)

Posted: 2012-06-08 17:40
by Rudd
This is probably due to the low geometry setting, I don't think there is anything to be done about it, but thank you for the bug report :)

Re: Muttrah parking doors closed ?)

Posted: 2012-07-06 17:55
by WeeD-KilleR
it looks more like the LOD which is loaded on this distance has a closed door.

Re: Muttrah parking doors closed ?)

Posted: 2012-07-07 22:36
by Matrox
Maybe change the Lod draw distance on medium and low settings?