UAV shaking and invisible markers
Posted: 2013-08-12 15:02
Description:
Today in PRTA Marlin STD I was using the UAV. Quite often when turning the camera (with mouse) the UAV view shaked drastically (like being in a tank and getting hit by another tank). Also some markers wouldn't appear on the map. I tried to mark one FOB few times without any success - later I used the objective marker and told everyone what it ment. Also I couldn't mark a Tank. Anyway, for me it seemed that 70% of markers did found their way on to the minimap, but the rest 30% just were invisible (although in chat it was written that "commander has set that and that marker").
Steps to Reproduce:
Go commander, launch UAV (in Marlin; haven't tested anywhere else) and check it out.
Screenshots / Video:
no need
Tested On:
Marlin AAS STD, PRTA.CO, PR 1.0.35.0
Just in case, sys info:
System Information
------------------
Operating System: Microsoft Windows 7 Ultimate (6.1.7601)
Architecture: 64-bit
Language: Latvian (Latvia)
Motherboard: Gigabyte Technology Co., Ltd. GA-78LMT-S2P
Processor: AMD FX(tm)-6100 Six-Core Processor (Physical: 3, Logical: 6)
Memory: 8,00 GB
DIMM Modules: A0: 4,00 GB @ 1333 MHz
A1: 4,00 GB @ 1333 MHz
Page File: 7,98 GB
.NET Framework: 4.5
Display Information
-------------------
Display Device(s): Generic PnP Monitor on NVIDIA GeForce GTX 660
Display Mode(s): 1680 x 1050 (32 bit) @ 60 Hz
Driver Version: 9.18.13.2049 (320.49)
Display Memory: 2,00 GB
Multisampling: 2, 4, 8
DPI: 96 (100%)
Audio Information
-----------------
Primary Playback: Speakers (Realtek High Definiti
Primary Recording: b (Realtek High Definition Audi
EAX: True
EAX 1.0: False
EAX 2.0: True
EAX 3.0: False
EAX 4.0: False
EAX 5.0: False
X-RAM: False
Disk Information
----------------
Install Path: C:\Program Files (x86)\Steam\steamapps\common\Battlefield 2
Free: 491,43 GB, Total: 931,41 GB, NTFS
Mod Path: C:\Program Files (x86)\Steam\steamapps\common\Battlefield 2\mods\pr
Free: 491,43 GB, Total: 931,41 GB, NTFS
Profiles Path: C:\Users\Ulvis\Documents\ProjectReality\Profiles
Free: 491,43 GB, Total: 931,41 GB, NTFS
Update DL Path: C:\Users\Ulvis\AppData\Local\Project Reality\Project Reality BF2\Downloads
Free: 491,43 GB, Total: 931,41 GB, NTFS
Update Log Path: C:\Users\Ulvis\AppData\Local\Project Reality\Project Reality BF2\UpdateLogs
Free: 491,43 GB, Total: 931,41 GB, NTFS
Game Information
----------------
CD Key Valid: True
Installed Mods: bf2, pr, xpack
Current Mod: pr
BF2 Version: BF2 1.5
PR Version: 1.0.35.0
Language: english
Debug Available: False
Large Address: True
Supported Hardware: None
Profile Information
-------------------
Profile 0001: [PRTA]Mouthpiece
Type: Online
Last Used Profile: True
View Intro: True
Fullscreen: True
Display Mode: 1680x1050@60Hz
Display Mode Valid: True
Graphics Scheme: Custom
Multisampling: 2x
VSync: False
Terrain Quality: High
Effects Quality: High
Geometry Quality: Low
Texture Quality: Medium
Lighting Quality: High
Dynamic Shadows: High
Dynamic Lights: High
Texture Filtering: High
Audio Provider: Hardware
Provider Valid: True
Audio Quality: High
EAX: True
Today in PRTA Marlin STD I was using the UAV. Quite often when turning the camera (with mouse) the UAV view shaked drastically (like being in a tank and getting hit by another tank). Also some markers wouldn't appear on the map. I tried to mark one FOB few times without any success - later I used the objective marker and told everyone what it ment. Also I couldn't mark a Tank. Anyway, for me it seemed that 70% of markers did found their way on to the minimap, but the rest 30% just were invisible (although in chat it was written that "commander has set that and that marker").
Steps to Reproduce:
Go commander, launch UAV (in Marlin; haven't tested anywhere else) and check it out.
Screenshots / Video:
no need
Tested On:
Marlin AAS STD, PRTA.CO, PR 1.0.35.0
Just in case, sys info:
System Information
------------------
Operating System: Microsoft Windows 7 Ultimate (6.1.7601)
Architecture: 64-bit
Language: Latvian (Latvia)
Motherboard: Gigabyte Technology Co., Ltd. GA-78LMT-S2P
Processor: AMD FX(tm)-6100 Six-Core Processor (Physical: 3, Logical: 6)
Memory: 8,00 GB
DIMM Modules: A0: 4,00 GB @ 1333 MHz
A1: 4,00 GB @ 1333 MHz
Page File: 7,98 GB
.NET Framework: 4.5
Display Information
-------------------
Display Device(s): Generic PnP Monitor on NVIDIA GeForce GTX 660
Display Mode(s): 1680 x 1050 (32 bit) @ 60 Hz
Driver Version: 9.18.13.2049 (320.49)
Display Memory: 2,00 GB
Multisampling: 2, 4, 8
DPI: 96 (100%)
Audio Information
-----------------
Primary Playback: Speakers (Realtek High Definiti
Primary Recording: b (Realtek High Definition Audi
EAX: True
EAX 1.0: False
EAX 2.0: True
EAX 3.0: False
EAX 4.0: False
EAX 5.0: False
X-RAM: False
Disk Information
----------------
Install Path: C:\Program Files (x86)\Steam\steamapps\common\Battlefield 2
Free: 491,43 GB, Total: 931,41 GB, NTFS
Mod Path: C:\Program Files (x86)\Steam\steamapps\common\Battlefield 2\mods\pr
Free: 491,43 GB, Total: 931,41 GB, NTFS
Profiles Path: C:\Users\Ulvis\Documents\ProjectReality\Profiles
Free: 491,43 GB, Total: 931,41 GB, NTFS
Update DL Path: C:\Users\Ulvis\AppData\Local\Project Reality\Project Reality BF2\Downloads
Free: 491,43 GB, Total: 931,41 GB, NTFS
Update Log Path: C:\Users\Ulvis\AppData\Local\Project Reality\Project Reality BF2\UpdateLogs
Free: 491,43 GB, Total: 931,41 GB, NTFS
Game Information
----------------
CD Key Valid: True
Installed Mods: bf2, pr, xpack
Current Mod: pr
BF2 Version: BF2 1.5
PR Version: 1.0.35.0
Language: english
Debug Available: False
Large Address: True
Supported Hardware: None
Profile Information
-------------------
Profile 0001: [PRTA]Mouthpiece
Type: Online
Last Used Profile: True
View Intro: True
Fullscreen: True
Display Mode: 1680x1050@60Hz
Display Mode Valid: True
Graphics Scheme: Custom
Multisampling: 2x
VSync: False
Terrain Quality: High
Effects Quality: High
Geometry Quality: Low
Texture Quality: Medium
Lighting Quality: High
Dynamic Shadows: High
Dynamic Lights: High
Texture Filtering: High
Audio Provider: Hardware
Provider Valid: True
Audio Quality: High
EAX: True