Project Reality Forums

I bought BF2 complete edition on origin, so it is already updated to v1.50, I downloaded PR:BF2 v1.0. I instaled it. But when I double-click on the launcher nothing happens... I've tried all compatibility lay outs, I've all deleted and all instalated again several times but it is not worthdoing... has anybody already had the same problem? I've been waiting too long to play PR v1.0 ^^

Did you try to start normal Battlefield 2 (no modification) ? Does that work??

And pls, in the PR Launcher-interface, click "support", then copy to clipboard all the hardware information, and post here.

Did you also follow these steps:

https://www.realitymod.com/forum/f27-pr ... ost1624082

And you might want to check this:

https://www.realitymod.com/forum/f27-pr ... ost1927166

Welcome to PR,

Just to be clear,
when you try to open the PRLauncher from your desktop, nothing happens?
Or
when you start the launcher , you click on the Play button, and nothing happens?

Are you using any type of overlay programs, like TS3 overlay, MSI Afterburner overlay, Ovewolf overlay, Raptr overlay, etc? If you are, shut them down completely.

Let's start troubleshooting:
First step is to make sure that vanilla BF2 online multiplayer works correctly.

Next step would be to check to see if your antivirus or firewall is blocking PRLauncher.exe or PRBF2.exe

Those two troubleshooting steps seem to be the obvious possible problems.

If you could post your system specs it would be useful.

regards,

Daniel wrote:Did you try to start normal Battlefield 2 (no modification) ? Does that work??

And pls, in the PR Launcher-interface, click "support", then copy to clipboard all the hardware information, and post here.

Did you also follow these steps:

https://www.realitymod.com/forum/f27-pr ... ost1624082

And you might want to check this:

https://www.realitymod.com/forum/f27-pr ... ost1927166

I have followed all these steps
Regarding the "How to solve Startup problems with PR1.0 in 5 Steps", the problem is there is no folder named "ProjectReality" in C:/Documents ... and even if I follow these steps it doesn't work either

[R-COM]LITOralis.nMd wrote:Welcome to PR,

Just to be clear,
when you try to open the PRLauncher from your desktop, nothing happens?
Or
when you start the launcher , you click on the Play button, and nothing happens?

Are you using any type of overlay programs, like TS3 overlay, MSI Afterburner overlay, Ovewolf overlay, Raptr overlay, etc? If you are, shut them down completely.

Let's start troubleshooting:
First step is to make sure that vanilla BF2 online multiplayer works correctly.

Next step would be to check to see if your antivirus or firewall is blocking PRLauncher.exe or PRBF2.exe

Those two troubleshooting steps seem to be the obvious possible problems.

If you could post your system specs it would be useful.

regards,

BF2 online works well, I have been playing BF2 for a long time.
My firewall and my antivirus aren't blocking PRLauncher.exe (I can't even launch PRUpdater.exe!!)
Everything seems ok, but it doesn't work... it's puzzling...

Exhaustive list of my system specs
------------------
System Information
------------------
Time of this report: 12/15/2013, 13:37:29
Machine name: ORDIPORTABLEAM
Operating System: Windows?7 ?dition Familiale Premium 64-bit (6.1, Build 7601) Service Pack 1 (7601.win7sp1_gdr.130104-1431)
Language: French (Regional Setting: French)
System Manufacturer: Acer
System Model: Aspire S3
BIOS: InsydeH2O Version 1.15
Processor: Intel(R) Core(TM) i7-2637M CPU @ 1.70GHz (4 CPUs), ~1.7GHz
Memory: 4096MB RAM
Available OS Memory: 3946MB RAM
Page File: 2239MB used, 5651MB available
Windows Dir: C:\Windows
DirectX Version: DirectX 11
DX Setup Parameters: Not found
User DPI Setting: Using System DPI
System DPI Setting: 96 DPI (100 percent)
DWM DPI Scaling: Disabled
DxDiag Version: 6.01.7601.17514 32bit Unicode

------------
DxDiag Notes
------------
Display Tab 1: No problems found.
Sound Tab 1: No problems found.
Input Tab: No problems found.

--------------------
DirectX Debug Levels
--------------------
Direct3D: 0/4 (retail)
DirectDraw: 0/4 (retail)
DirectInput: 0/5 (retail)
DirectMusic: 0/5 (retail)
DirectPlay: 0/9 (retail)
DirectSound: 0/5 (retail)
DirectShow: 0/6 (retail)

---------------
Display Devices
---------------
Card name: Intel(R) HD Graphics Family
Manufacturer: Intel Corporation
Chip type: Intel(R) HD Graphics Family
DAC type: Internal
Device Key: Enum\PCI\VEN_8086&DEV_0116&SUBSYS_06351025&REV_09
Display Memory: 1760 MB
Dedicated Memory: 128 MB
Shared Memory: 1632 MB
Current Mode: 1366 x 768 (32 bit) (60Hz)
Monitor Name: Moniteur Plug-and-Play g?n?rique
Monitor Model: unknown
Monitor Id: AUO102C
Native Mode: 1366 x 768(p) (60.010Hz)
Output Type: Internal
Driver Name: igdumd64.dll,igd10umd64.dll,igd10umd64.dll,igdumdx32,igd10umd32,igd10umd32
Driver File Version: 8.15.0010.2476 (English)
Driver Version: 8.15.10.2476
DDI Version: 10.1
Driver Model: WDDM 1.1
Driver Attributes: Final Retail
Driver Date/Size: 8/9/2011 17:32:00, 8311808 bytes
WHQL Logo'd: Yes

Up! plz. Still trying to find a solution...

Are you running as an admin?
What antivirus?
What firewall?

Can you update punkbuster manually please.

Which .NET Framework do you have installed? PRLauncher requires 4.0 or newer. .NET Framework 4.5.1 is the newest release. Make sure you have at least 4.0 installed.

Do you have very restrictive read/write permissions set for your My Documents directory?

[R-COM]LITOralis.nMd wrote:Are you running as an admin?
What antivirus?
What firewall?

Can you update punkbuster manually please.

Which .NET Framework do you have installed? PRLauncher requires 4.0 or newer. .NET Framework 4.5.1 is the newest release. Make sure you have at least 4.0 installed.

Do you have very restrictive read/write permissions set for your My Documents directory?

My Framework wasn't updated, now PR works, thank you so much! I can now play as a storm trooper in the French army ; )

Or as MEC against the french! xD

I'll try to avoid shooting at white flags