Page 1 of 2
Statickmesh error
Posted: 2015-08-14 15:27
by Liptonn
I can`t launch my game in normal Windows 7 mode, so i changed to Windows XP (Service Pack 2) mode. However, when i try to play this error comes up.
http://puu.sh/jBmNq/bf5616b61f.png
Does anybody have any advices?
Re: Statickmesh error
Posted: 2015-08-14 19:24
by DC_K
open launcher>support>copy paste here
Re: Statickmesh error
Posted: 2015-08-15 12:05
by Liptonn
Code: Select all
System Information
------------------
Operating System: Microsoft Windows 7 Ultimate (6.1.7600)
Architecture: 64-bit
Current Culture: Polish (Poland)
Motherboard: Gigabyte Technology Co., Ltd. GA-M56S-S3
Processor: AMD Athlon(tm) 64 X2 Dual Core Processor 5200+ (Physical: 2, Logical: 2)
Memory: 5,00 GB
DIMM Modules: A0: 1024,00 MB @ 667 MHz
A1: 1024,00 MB @ 667 MHz
A2: 2,00 GB @ 667 MHz
A3: 1024,00 MB @ 667 MHz
Page File: 3,00 GB
.NET Framework: Unknown
Display Information
-------------------
Display Device(s): Generic PnP Monitor on NVIDIA GeForce GTX 460
Display Mode(s): 1366 x 768 (32 bit) @ 60 Hz
Driver Version: 9.18.13.5306 (353.06)
Display Memory: 1024,00 MB
Multisampling: 2, 4, 8
DPI: 96 (100%)
Audio Information
-----------------
Primary Playback: Speakers (High Definition Audio
Primary Recording: Microphone (High Definition Aud
Open AL Renderer: Software
EAX: True
EAX 1.0: False
EAX 2.0: True
EAX 3.0: False
EAX 4.0: False
EAX 5.0: False
X-RAM: False
Disk Information
----------------
Install Path: C:\Program Files (x86)\Project Reality\Project Reality BF2
Free: 34,21 GB, Total: 97,65 GB, FS: NTFS, SSD: False
Mod Path: C:\Program Files (x86)\Project Reality\Project Reality BF2\mods\pr
Free: 34,21 GB, Total: 97,65 GB, FS: NTFS, SSD: False
Profiles Path: C:\Users\Szymon\Documents\ProjectReality\Profiles
Free: 34,21 GB, Total: 97,65 GB, FS: NTFS, SSD: False
Update DL Path: C:\Users\Szymon\AppData\Local\Project Reality\Project Reality BF2\Downloads
Free: 34,21 GB, Total: 97,65 GB, FS: NTFS, SSD: False
Update Log Path: C:\Users\Szymon\AppData\Local\Project Reality\Project Reality BF2\UpdateLogs
Free: 34,21 GB, Total: 97,65 GB, FS: NTFS, SSD: False
Game Information
----------------
Installed Mods: Bf2, pr
Current Mod: pr
Version: Standalone - 1.0
PR Version: 1.3.1.0
Language: english
Debug Available: False
Large Address: True
Supported Hardware: None
Profile Information
-------------------
Profile 0001: Lipton992
Type: Online
View Intro: True
Fullscreen: False
Display Mode: 1024x768@60Hz
Display Mode Valid: True
Graphics Scheme: Medium
Multisampling: Off
VSync: False
Terrain Quality: Low
Effects Quality: Medium
Geometry Quality: Low
Texture Quality: Medium
Lighting Quality: Low
Dynamic Shadows: Medium
Dynamic Lights: Medium
Texture Filtering: Medium
Audio Provider: Software
Provider Valid: True
Audio Quality: Medium
EAX: True
Re: Statickmesh error
Posted: 2015-08-15 15:52
by UTurista
That is an issue with the installation, one or more files are corrupt thus giving that error.
You should re-install your game, but before you do that you can try to replace your "
shaders_client.zip" file, located in your installation folder "
\Project Reality\mods\pr\content\" with this one,
Link.
MD5 check: 2640428C1E5DB558E336E98C9F6546C7
Online MD5 Check
Re: Statickmesh error
Posted: 2015-08-15 16:20
by Liptonn
I already have reinstalled the game 2 times, and this error still appears, i`ll try to replace the files now.
Re: Statickmesh error
Posted: 2015-08-15 16:24
by Liptonn
Error still appear after replacing shaders, i can reinstall the game again, but i think it won`t help.
Edit: So i did download another iso, installed game again and error is still here.
Re: Statickmesh error
Posted: 2015-08-15 18:02
by DC_K
not sure if this will help.. try deleting the cache folder?
Documents\ProjectReality\mods\bf2\cache
Re: Statickmesh error
Posted: 2015-08-15 19:12
by Liptonn
I don`t have the bf2 folder in Documents/Project Reality.
Maybe this is the problem here?
http://puu.sh/jCJ5H/b68a1d9f17.png - screen documents folder
Re: Statickmesh error
Posted: 2015-08-15 19:41
by Liptonn
Idk how should i launch this game, there are several problems
- When i try to launch game in Windows 7 mode, nothing happens and games is not responding
- When i try to launch game in Windows XP mode, the statickmesh error appears
- When i try to launch game by PRlauncher in Windows 7 mode, game goes not responding
- When i try to launch game by PRlauncher in Windows Vista mode, it says "Unable to find root BF2 Directory
Re: Statickmesh error
Posted: 2015-08-16 05:51
by DC_K
Re: Statickmesh error
Posted: 2015-08-16 09:07
by Liptonn
I had DirectX and and Framework .Net 4, so i just updated .NET from 4 to 4.5, and game still doesn`t work without using comatibility.
When i`m launching in normal Windows 7 mode, game launch, screen stays black and then is "not responding" in Task Menager.
Re: Statickmesh error
Posted: 2015-08-16 16:46
by DC_K
run it in windows mode, does an error pop up?
try and go to launcher>options>reset all profiles and try starting the game up again
Re: Statickmesh error
Posted: 2015-08-16 19:09
by Liptonn
Nope, it didin`t help, screen is black and nothing happens.
http://puu.sh/jDRs3/d59e8a8f92.png
Re: Statickmesh error
Posted: 2015-08-16 19:29
by DC_K
do you have any anti virus?
did you whitelist prbf2.exe prlauncher.exe and prmumble.exe
how many files do you have in your profiles folder? located in documents/projectreality/profiles/0001
verify with this
https://www.dropbox.com/sh/a0qm9ybeg3kl ... mszAa?dl=0
do you have any overlays? any unnecessary programs running in the background?
open video.con in profiles using notepad
change this:
VideoSettings.setResolution 1024x768@60Hz
to this:
VideoSettings.setResolution 1366x768@60Hz
Re: Statickmesh error
Posted: 2015-08-16 19:35
by Liptonn
I don`t use any antyvirus, also i have Firewall off
In documents/projectreality/profiles/0001 i have 8 files1
I don`t have any overlays
And i already had this set VideoSettings.setResolution 1366x768@60Hz
Re: Statickmesh error
Posted: 2015-08-16 19:41
by DC_K
i'm starting to run out of ideas..
let's backtrack for a second
how long did it take for it to not respond?
did you wait longer? like 2/3 mins?
can you set your resolution to 800x600@60Hz and try that?
try deleting your profiles page and then retrieving the account
if that doesn't work, make a new account for testing purposes, and see if that works
how did you download PR? torrent or direct?
i really don't know what is causing this.. i'm assuming you have the latest direct x and windows updates.. your specs should be able to run this game
Re: Statickmesh error
Posted: 2015-08-16 19:44
by Liptonn
I didin`t wait more than 30 secs, so i will try to do everything you said and will replay back after testing.
Edit: First i did download from Torrent, and yesterday i did download from direct, both seems to doesn`t work so far.
Re: Statickmesh error
Posted: 2015-08-16 19:57
by Liptonn
Okay, so none of these work.
I also don`t know what make the problem here.
I don`t know if this is a problem, but shouldn`t i have a bf2 folder in documents/project reality, because i don`t have that folder.
Re: Statickmesh error
Posted: 2015-08-17 01:31
by DC_K
if you can reinstall the game (using torrent preferably) that is worth a try
and no, you dont need bf2 file, that is for a cache (which you need to run the game to make)
i'm honestly out of ideas
reinstall your game using torrent, if that doesn't fix it, i'll PM you and i'll use teamviewer to figure it out
Re: Statickmesh error
Posted: 2015-08-17 12:33
by Liptonn
Okay, so i did download the torrent file again, installed and it didin`t work out. The only thing that come to my mind is the iso program i use. I use DAEMON Tools Lite, i tried using the VirtualClone Driver, which is sugested in Installation Guide, but it seems not work for me.
