Page 1 of 1
pr:bf2 has closed, cleaning up resources
Posted: 2015-10-18 14:01
by Madooo
Hello, I just installed pr right now, then when I run pr got this problem, tried to reset profiles and settings but still same
Code: Select all
System Information
------------------
Operating System: Microsoft Windows 10 Pro (10.0.10240)
Architecture: 64-bit
Current Culture: English (United States)
Motherboard: MSI B85M-G43 (MS-7823)
Processor: Intel(R) Core(TM) i5-4430 CPU @ 3.00GHz (Physical: 4, Logical: 4)
Memory: 8.00 GB
DIMM Modules: ChannelA-DIMM0: 4.00 GB @ 1600 MHz
ChannelB-DIMM0: 4.00 GB @ 1600 MHz
Page File: 1.88 GB
.NET Framework: 4.5+ Release Build: 393295, Runtime: 4.0.30319.42000
Display Information
-------------------
Display Device(s): Generic PnP Monitor on NVIDIA GeForce GTX 750 Ti
Display Mode(s): 1440 x 900 (32 bit) @ 60 Hz
Driver Version: 10.18.13.5850 (358.50)
Display Memory: 2.00 GB
Multisampling: 2, 4, 8
DPI: 96 (100%)
Audio Information
-----------------
Primary Playback: Speakers (2- High Definition Au
Primary Recording: Microphone (2- High Definition
Open AL Renderer: Software
EAX: True
EAX 1.0: False
EAX 2.0: True
EAX 3.0: False
EAX 4.0: False
EAX 5.0: False
X-RAM: False
Disk Information
----------------
Install Path: C:\Program Files (x86)\Project Reality\Project Reality BF2
Free: 423.22 GB, Total: 465.66 GB, FS: NTFS, SSD: False
Mod Path: C:\Program Files (x86)\Project Reality\Project Reality BF2\mods\pr
Free: 423.22 GB, Total: 465.66 GB, FS: NTFS, SSD: False
Profiles Path: C:\Users\Ahmed Ali\Documents\ProjectReality\Profiles
Free: 423.22 GB, Total: 465.66 GB, FS: NTFS, SSD: False
Update DL Path: C:\Users\Ahmed Ali\AppData\Local\Project Reality\Project Reality BF2\Downloads
Free: 423.22 GB, Total: 465.66 GB, FS: NTFS, SSD: False
Update Log Path: C:\Users\Ahmed Ali\AppData\Local\Project Reality\Project Reality BF2\UpdateLogs
Free: 423.22 GB, Total: 465.66 GB, FS: NTFS, SSD: False
Game Information
----------------
Installed Mods: pr
Current Mod: pr
Version: Standalone - 1.0
PR Version: 1.3.1.0
Language: english
Debug Available: False
Large Address: True
Supported Hardware: None
Profile Information
-------------------
Profile 0001: Enzo(PR)
Type: Online
View Intro: True
Fullscreen: True
Display Mode: 1440x900@60Hz
Display Mode Valid: True
Graphics Scheme: High
Multisampling: 8x
VSync: False
Terrain Quality: High
Effects Quality: High
Geometry Quality: High
Texture Quality: High
Lighting Quality: High
Dynamic Shadows: High
Dynamic Lights: High
Texture Filtering: High
Audio Provider: Software
Provider Valid: True
Audio Quality: Medium
EAX: True
Re: pr:bf2 has closed, cleaning up resources
Posted: 2015-10-19 00:37
by DC_K
do you have ALL the windows 10 updates? make sure you have direct X
did you follow the instructions here and download the necessary files?
https://www.realitymod.com/forum/f27-pr ... guide.html
make sure you have AV disabled or whitelisted for PR (prbf2.exe prmumble.exe and prlauncher.exe)
if you go here:
C:\Program Files (x86)\Project Reality\Project Reality BF2\mods\pr
and run prbf2.exe, what happens?
Re: pr:bf2 has closed, cleaning up resources
Posted: 2015-10-19 11:32
by Madooo
DC_K wrote:do you have ALL the windows 10 updates? make sure you have direct X
did you follow the instructions here and download the necessary files?
https://www.realitymod.com/forum/f27-pr ... guide.html
make sure you have AV disabled or whitelisted for PR (prbf2.exe prmumble.exe and prlauncher.exe)
if you go here:
C:\Program Files (x86)\Project Reality\Project Reality BF2\mods\pr
and run prbf2.exe, what happens?
Yeah already i installed directx and the other stuff, I have Avast AV i disabled it and still same problem. Checked to run prbf2.exe from the c: drive got black screen then crash.
___________________________________
updated, i just downloaded full package of Directx 9 and FINALLY IT WORKS!!! THANK YOU SO MUCH MATE!
Re: pr:bf2 has closed, cleaning up resources
Posted: 2015-10-20 17:59
by Lange
Had the same issue been working on for some time no solution. One thing i'd try is your visual up to date:
https://www.microsoft.com/en-us/downloa ... x?id=48145. Also direct X update:
http://www.directxupdate.com/See if that helps ill update if I figure it out more on my end.
Re: pr:bf2 has closed, cleaning up resources
Posted: 2015-10-21 07:28
by LITOralis.nMd
I had same problem but I think I solved it. However, my problem is that I couldn't save to OneDrive folders. Other than that, I can save.
I found out that OneDrive permission keep resetting itself is because I have Homegroup network. My other computer without HomeGroup network doesn't have this problem. Once it's set, the permission doesn't change back. So, for those with Homegroup network, you'll find in Sharing tab of folder properties 2 entries: one is Homegroup and the other is the owner.
Just change the permission level of Homegroup to Read/Write instead of Read only.
Also in my settings, OneDrive is owned by my userid, with SYSTEM, ADMINISTRATORS, and Homeusers have all FULL CONTROL.
I realized that permission kept resetting is because my computer is considered to be part of Homegroup network, which only has Read-only access.
If you want to check if it works or not, just right click inside OneDrive folder, choose NEW. IF you only see FOLDER, then it's read-only. If it shows other file types, then it's solved.
I've been resetting my computer a few times and working with files inside OneDrive and I haven't encountered OneDrive problem yet.
In short, if you use Homegroup network, make sure that Sharing is Read+Write. If you don't, just remove your Homegroup network. Or use Workgroup instead. And yes, I'm using MS Account.
Re: pr:bf2 has closed, cleaning up resources
Posted: 2015-10-23 17:48
by fetuslord
Madooo wrote:Yeah already i installed directx and the other stuff, I have Avast AV i disabled it and still same problem. Checked to run prbf2.exe from the c: drive got black screen then crash.
___________________________________
updated, i just downloaded full package of Directx 9 and FINALLY IT WORKS!!! THANK YOU SO MUCH MATE!
how did you install the full direct x 9? When I try to install the full thing it tells me that I can't with this OS.
Re: pr:bf2 has closed, cleaning up resources
Posted: 2015-10-23 19:35
by Lange
Im wondering the same, I have the same issue and that may be whats wrong. Thanks
Re: pr:bf2 has closed, cleaning up resources
Posted: 2015-10-23 20:16
by MaSSive
Web installer is obviosly not longer available on Microsoft site, they might removed it for a reason.
This link will get you the needed DirectX9c June 2010 and it comes packed in the installer which is actually archive which you can extract with 7zip or WinRar. So if installer doesnt work for you extract and run DXSETUP.exe from the folder where you unpacked it.
Re: pr:bf2 has closed, cleaning up resources
Posted: 2015-10-24 02:55
by fetuslord
MaSSive wrote:Web installer is obviosly not longer available on Microsoft site, they might removed it for a reason.
This link will get you the needed DirectX9c June 2010 and it comes packed in the installer which is actually archive which you can extract with 7zip or WinRar. So if installer doesnt work for you extract and run DXSETUP.exe from the folder where you unpacked it.
I've done that install as well, and it doesn't seem to have had any effect.
Re: pr:bf2 has closed, cleaning up resources
Posted: 2015-10-24 03:54
by LITOralis.nMd
Do you have an online Microsoft Live account for Windows 10,
or a offline local account?
If you have an online Live account you have to do what I said above.
Re: pr:bf2 has closed, cleaning up resources
Posted: 2015-10-24 20:03
by M2Shawning
I had the same problem as everyone else, both Windows 10 and Windows 8 would not want to work. My solution was to go into the PR directory and change the executable file to launch with Windows 7 Compatibility. Then I launched PR from the launcher executable and everything worked perfectly.
Re: pr:bf2 has closed, cleaning up resources
Posted: 2015-10-25 02:06
by MaSSive
Can OP
read this and post after it, and confirm if he has
ProjectReality folder in
Documents?
For some odd reason some people miss the config folder so this would cause launcher to fail. A fix would be to upload stock Profiles folder somewhere and let them download that, unpack in Documents and make sure its not read only, and then try to launch. Launcher must be closed before doing this.
Lets see first if you have it or not.