Project Reality Forums

I have been trying for weeks to get the microphone to work with Voip
I have tried every combination and program Mumble, Team speak, EA Battlefield
I have an Soundblaster X-fi xtremegamer champoin series card. Microphone works properly
I have set the audio accellators to basic
I have got it to show that it will work in the Microphone tests for all three programs but when I start playing the game it does not work .
I would like to be able to make it work from the IO drive that I have with the soundcard preferably, for it would have adjustable volume.

When asking for help,
please remember to post your:
O/S,
systems specks,
network setup
And a brief history before and after problem started.
Please describe when your CTD or problem hits and
what you have already tried.

Have/can you disable on-board audio?
You have your audio card selected in windows for speakers and mike?
Works O.K. in other programs?
Do you have mike boost set on in windows?
Microphone tests O.K. in game or windows audio setup?

Asus mother board p5k-e
2 gb ram
3.2 ghz cpu P4
Yamaha SW1000xg
Nvidia 8600 gt video
Dsl connection to internet
Mic plugged into Mic/ line in #1
PR .86
Mumble Pr .86
X-Fi xtremegamer Fatal1ty champion series with I/O Drive
Mumble will not let me move sliders in certain settings
ASIO compliance

I nave not been able to get it to work ever since I installed the programs, yet programs show that it should work from going through the different tests

Remove programs Mumble, Team speak to start.
Focus on voip for BF2/PR first.
Have/can you disable on-board audio?
You have your audio card selected in windows for speakers and mike?
Works O.K. in other programs? Test by recording your voice a bit.
Do you have mike boost set on in windows?
run audio setup in game next
remember to hit 'apply' after making changes.
Microphone tests O.K. in game and/or windows audio setup?

motherboard sound has been disabled
mic boost is set in windows
did that
did that
yes/yes

If my post would get sticky you would see the way to fix it but they won't so to fix it go to Start > Run > DXDIAG and but the sound accelerator to Basic and it should work

I also did that and all checks out ok on the tests
both programs show that the voip should be working
I get a speaker box shown by my name
I can hear them, but they can not hear me

Sounds like your microphone is muted then

Psycho, people just need to learn to use the search function is all.

Does your headset have a volume/ mute control on the line?
What O/S are you running?

mic is not muted and has 20 db boost set on

in control panel
why is the exception to the rule has to be be this time
So please dont get mad if I am not able to respond to you guys and gals even though I do show voip on the squad screen and I have searched this forum and no luck so far WAAAAAHHHHH