Page 1 of 1
[HELP!] The sun, it burns! (Sun position is stuffed)
Posted: 2010-04-19 03:47
by Scr3amX2
Mmkay, so I've got a sun flare and sun up in the sky, where it should be, yet ingame I don't see the sun in the sky at all, but I see a flare through the ground at some points.
Re: [HELP!] The sun, it burns! (Sun position is stuffed)
Posted: 2010-04-19 03:58
by Rudd
in teh editor click Light, click 'set sun(flare) position' then set the sun and the flare to the same position, the best way is to look at where you want the sun to be then click 'set flare/sun TO camera position'
remember to do BOTH the sun and flare
the sun determines how light interacts with objects, teh flare is the texture that comes up when you look near the sun.
hope that helps
Re: [HELP!] The sun, it burns! (Sun position is stuffed)
Posted: 2010-04-19 04:00
by Scr3amX2
That's exactly what I've done!
Which is causing me to be confused as to why the sunflare is showing up under ground.
??:
Re: [HELP!] The sun, it burns! (Sun position is stuffed)
Posted: 2010-04-19 04:19
by CodeRedFox
I have that error in the editor all the time that it will flip the flare. You just have to edit it in the sky con file. It should be a negative number. remove the negative symbol.
Just do it as your last step or dont and one at all for now.
Re: [HELP!] The sun, it burns! (Sun position is stuffed)
Posted: 2010-04-19 05:14
by HangMan_
Good to see another kiwi mapping
Drop me a pm mate
Re: [HELP!] The sun, it burns! (Sun position is stuffed)
Posted: 2010-04-20 13:24
by Amok@ndy
you need to place the Sun direction TO the camera and the Flare direction FROM the camera
its a lil bit tricky ...
Re: [HELP!] The sun, it burns! (Sun position is stuffed)
Posted: 2010-04-25 01:52
by dunem666
yeah u got it wrong way round there, SUN TO FLARE AWAY
Re: [HELP!] The sun, it burns! (Sun position is stuffed)
Posted: 2013-07-25 19:01
by Mineral
[R-DEV]Amok@ndy wrote:you need to place the Sun direction TO the camera and the Flare direction FROM the camera
its a lil bit tricky ...
Does the editor change somehow from the in-game flare? Cause your described method doesn't work for me.
Sundirection is pretty straight forward, look at the sun and use 'to the camera'.
But for flare:
'from camera' (no flare):
'to camera':
Which makes me think that it should be 'to camera' too for the flare? However I suffer from the same issue on my map with the flare being under the ground. Any clues?
Posted: 2013-07-28 12:17
by Mineral
Bump. Issue remains had no real clue how fix it. The direction coordinates are exactly the same as the sun direction like on all pr maps.
Re: [HELP!] The sun, it burns! (Sun position is stuffed)
Posted: 2013-07-29 00:42
by Rudd
post your sky.con?
Re: [HELP!] The sun, it burns! (Sun position is stuffed)
Posted: 2013-07-29 12:58
by Mineral
Note that I test my map always in the 1.0 test builds. But that shouldn't be a issue here.
Code: Select all
Lightmanager.init
Lightmanager.skycolor 0.498039/0.517647/0.54902
Lightmanager.ambientcolor 0.509804/0.513726/0.556863
Lightmanager.sunColor 0.698039/0.670588/0.631373
Lightmanager.sunSpecColor 1/1/1
if v_arg1 == BF2Editor
LightSettings.TerrainSunColor 0.83/0.83/0.83
LightSettings.TerrainSkyColor 0.65/0.62/0.55
LightmapSettings.waterSunIntensity 0.8
else
terrain.sunColor 0.83/0.83/0.83
terrain.GIColor 0.65/0.62/0.55
terrain.waterSunIntensity 0.8
endIf
Lightmanager.staticSunColor 0.49/0.49/0.49
Lightmanager.staticSpecularColor 0.21/0.21/0.21
Lightmanager.staticSkyColor 0.45/0.44/0.40
Lightmanager.singlePointColor 0.00/0.00/0.00
[color=Red][b]Lightmanager.sunDirection 0.560533/-0.590561/0.580552[/b][/color]
Lightmanager.enableSun 1
Lightmanager.effectSunColor 1.00/1.00/1.00
Lightmanager.effectShadowColor 1.00/1.00/1.00
Lightmanager.defaultEffectLightAffectionFactor 1
Lightmanager.hemilerpbias 1
hemiMapManager.setBaseHemiMap Levels/iron_thunder/groundhemi 0.000000/0.000000/0.000000 2048.000000 500.000000
Lightmanager.treeAmbientColor 0.77/0.77/0.77
Lightmanager.treeSunColor 0.48/0.48/0.48
Lightmanager.treeSkyColor 1.00/1.00/1.00
if v_arg1 == BF2Editor
else
run /Common/Sky/SkyDome/skydome.con
run /Common/Sky/Flare/flaresprite.con
endIf
Skydome.skyTemplate skydome
Skydome.cloudTemplate cloudlayer
Skydome.hasCloudLayer 1
Skydome.hasCloudLayer2 1
Skydome.scrolldirection 0.005/0
Skydome.scrolldirection2 0.003/0
Skydome.cloudTexture common\textures\cloud\cloud08
Skydome.cloudTexture2 common\textures\cloud\cloud01
Skydome.skyTexture common\textures\sky\skyclearironthunder
Skydome.domeRotation 0
Skydome.fadeCloudsDistances 1000/1100
Skydome.cloudLerpFactors 0.5/0.5
Skydome.flareTexture common\textures\sunflare\sunglow_32bit_star
[color=red][b]Skydome.flareDirection 0.56/-0.59/0.58[/b][/color]
Renderer.fogColor 187.00/204.00/209.00
Renderer.fogStartEndAndBase -50.00/700.00/-0.30/-100.00
Re: [HELP!] The sun, it burns! (Sun position is stuffed)
Posted: 2013-07-29 13:01
by AfterDune
I always choose sunflare TO camera and sundirection TO camera. Always works for me
.
Re: [HELP!] The sun, it burns! (Sun position is stuffed)
Posted: 2013-07-29 13:14
by Mineral
Yeah same for me, just didn't do it this time
Re: [HELP!] The sun, it burns! (Sun position is stuffed)
Posted: 2013-07-30 17:44
by Rabbit
Try removing the negative?
Lightmanager.sunDirection 0.560533/-0.590561/0.580552
To
Lightmanager.sunDirection 0.560533/0.590561/0.580552
Re: [HELP!] The sun, it burns! (Sun position is stuffed)
Posted: 2013-07-30 17:55
by Rudd
yeah the values should be X/Y/Z so reverse the Y?
Re: [HELP!] The sun, it burns! (Sun position is stuffed)
Posted: 2013-07-30 21:55
by Mineral
both sun and flare?
Re: [HELP!] The sun, it burns! (Sun position is stuffed)
Posted: 2013-07-31 06:02
by lucky.BOY
Doesnt sun position control how shadows are cast? So unless your lightmaps are funky too, i wouldnt touch that.
Anyway, both positions should be the same, right?
Re: [HELP!] The sun, it burns! (Sun position is stuffed)
Posted: 2013-08-04 17:15
by Mineral
My Flare direction had to be the inverse of the sun :s I couldn't have guessed that
Thanks for the replies guys.