Page 1 of 1
CTD whitout error message
Posted: 2011-02-04 16:06
by Tarranauha200
Heres the story:
Last weekend when playing PR my power suply said bang, so I got new one(340W). Also installed new graphigh card. Now, when I finally istalled the new card and started PR, 1 sec after PR goes full-size it CTD whitout error message.
What I tried: Rebooting, Reinstalling PR.
Maybe some of my files were corrupted when my computer broke?
Specs:
ADM athlon 64 X2 Dual Core 5000+ 2,6GHz
3070MB RAM
G-Card: ASUS EAH5670
Re: CTD whitout error message
Posted: 2011-02-04 16:45
by SnipeHunt
What graphics card?
Alot of the new cards require 400watt+ PSU
Re: CTD whitout error message
Posted: 2011-02-04 16:56
by Tarranauha200
SnipeHunt wrote:What graphics card?
Alot of the new cards require 400watt+ PSU
Asus EAH5670
Not any power cables or anything, really light card.
So I dont think its about that.
Re: CTD whitout error message
Posted: 2011-02-04 17:47
by Johncro
Tarranauha200 wrote:Asus EAH5670
Not any power cables or anything, really light card.
So I dont think its about that.
Bro for that card you need 500W or more, plus an PCIe power connector
Re: CTD whitout error message
Posted: 2011-02-04 18:43
by Tarranauha200
Re: CTD whitout error message
Posted: 2011-02-04 18:50
by Johncro
Didn't realize it was the 512MB version.
System requirements:
Suggested ATI Radeon? HD 5670 512MB GDDR5 System Requirements
* PCI Express? based PC is required with one X16 lane graphics slot available on the motherboard
*
400 Watt or greater power supply recommended (500 Watt for ATI CrossFireX? technology in dual mode)
* Certified power supplies are recommended. Refer to
AMD Certified Power Supplies for a list of Certified products
* Minimum 1GB of system memory
* Installation software requires CD-ROM drive
* DVD playback requires DVD drive
* Blu-ray? playback requires Blu-ray drive
* For an ATI CrossFireX? system, a second ATI Radeon? HD 5670 graphics card and an ATI CrossFireX Ready motherboard are required
You should get a new PSU for the card. But I was wrong about the external power connector.
Re: CTD whitout error message
Posted: 2011-02-04 18:52
by illidur
did you try manually setting your resolution in the settings file? or you can do the same thing by setting the resolution in the shortcut's target.
user/mydocuments/battlefield2/profiles. find the video files in 000X and default. right click edit. then just set the resolution numbers to your native resolution.
Re: CTD whitout error message
Posted: 2011-02-04 20:54
by Tarranauha200
IT WORKED!!!
Thank you so much. I was about to reinstal BF2.
And thx for everyone that answered, wasting their time on my problems.
Ps. wont get another PSU till this one die.