Page 1 of 1

Would I be able to run on high?

Posted: 2011-03-16 16:07
by =ESF=Mercy300
I'm upgrading to 2gb ddr2, amd x2 4200, geforce 8400 GS 1gb ddr2. Will I be able to run on high with decent fps?

Re: Would I be able to run on high?

Posted: 2011-03-16 18:02
by Jigsaw
Moved to PR:BF2 Support.

Re: Would I be able to run on high?

Posted: 2011-03-16 19:09
by Rudd
2GB ddr2 665
you'll need a total of 4GB if you want good performance on higher settings

Re: Would I be able to run on high?

Posted: 2011-03-16 22:05
by =ESF=Mercy300
'Limeni[BiH wrote:;1563116']No. I don't think you will.
I have one PC with 2GB ddr2 665, amd X2 4500, ATI 4850 512 GB and i cant get decent FPS on all high with it.
So how much FPS did u get and how much did u get on med?

Re: Would I be able to run on high?

Posted: 2011-03-16 22:25
by =ESF=Mercy300
Its decent fps on medium. But will I get more FPS cause I have 1gb instead of 512mb?

Re: Would I be able to run on high?

Posted: 2011-03-17 00:39
by ConscriptVirus
the 1Gb won't increase your fps. Last i checked (when running on med/high settings) PR used only like 300mb of video ram. also, your video ram is a bit slow (ddr2 compared to modern GDDR5) and it's important to have fast video ram since PR is a bit texture heavy.


i would go for at least 4gb of ram. (ram is pretty easy to upgrade) but i don't think it will be that necessary since you'll be running on lower settings. and i would go for medium/low settings, making sure that lighting, textures, and geometry are set to medium.

Re: Would I be able to run on high?

Posted: 2011-03-17 14:56
by declan54321
The only real thing slowing down your fps is the graphics card, which (correct me if I am wrong) is a budget card. Even a GTS250 (or it's modern-day equivalent) can run PR on high, and that cost me ?100 (although I have a GTX 280 now...

Upgrade your RAM from 2GB to 4GB if possible. On vanilla BF2 (Installed on an SSD), there was so much stuttering, it was unplayable. But when I upgraded to 4GB RAM, it was smooth as silk.

Your processor is fine for the job (that's assuming it is 2.6/7/8 GHz)

Re: Would I be able to run on high?

Posted: 2011-03-17 14:58
by declan54321
'Limeni[BiH wrote:;1563116']I have one PC with 2GB ddr2 665, amd X2 4500, ATI 4850 512 GB and i cant get decent FPS on all high with it.
Really? 512 GB??? Computer technology has certainly moved on recently...

Re: Would I be able to run on high?

Posted: 2011-03-17 23:35
by =ESF=Mercy300
LOL! I'm just gonna play with these spec temporarliy till I buy a better computer to run PR:ARMA 2 :)

Re: Would I be able to run on high?

Posted: 2011-03-17 23:45
by =ESF=Mercy300
Thx for the advise :)

Re: Would I be able to run on high?

Posted: 2011-03-18 00:38
by =ESF=Mercy300
Would it be better if I upgraded to a 5450 512 mb ddr3?

Re: Would I be able to run on high?

Posted: 2011-03-22 17:58
by =ESF=Mercy300
But the 5450 is DDR3

Re: Would I be able to run on high?

Posted: 2011-03-22 18:40
by Smiddey723
=ESF=Mercy300 wrote:But the 5450 is DDR3
5450 would be better than a 8600GT imo