lag?! sucks!? , so help me!

[Bedo-2010]

ah , its stell there and its anoyying like hell , and yes i stouched the tcp setting and the rss did help so what it got to do with the rss and cpu? and geek over here plx?!

[Bedo-2010]

just found out that the rss didnt make a shi*, not sure if its the cpu or not plz help before the release of the new patch, wich is after 6 hr or less S!

[thepalerider]

If your running Xp you can tune up your internet connection with TCP Optimizer to maximize throughput.
check out speed guides
web site
click here to use their
TCP/IP Analyzer
results will show if you can improve throughput.

[Bedo-2010]

ok am using windows 7 but i did use tcp thing once i dont know if there did f*ck up my p.c
from the tcp/ip analyzer i got this
? SpeedGuide.net TCP Analyzer Results ?
Tested on: 10.15.2010 01:46
IP address: 78.138.xxx.xx
Client OS: Windows 7

TCP options string: 020405b40103030201010402
MSS: 1460
MTU: 1500
TCP Window: 66640 (NOT multiple of MSS)
RWIN Scaling: 2 bits (2^2=4)
Unscaled RWIN : 16660
Recommended RWINs: 64240, 128480, 256960, 513920, 1027840
BDP limit (200ms): 2666kbps (333KBytes/s)
BDP limit (500ms): 1066kbps (133KBytes/s)
MTU Discovery: ON
TTL: 44
Timestamps: OFF
SACKs: ON
IP ToS: 00000000 (0)

it says that i got problem with RWIN the prop. is
Default TCP Receive Window (RWIN) = 66640
RWIN Scaling (RFC1323) = 2 bits (scale factor: 2^2=4)
Unscaled TCP Receive Window = 16660

In Windows 7, unless "TCP/IP Auto-Tuning" is disabled, only the Current TCP Window is displayed. Use the SG Vista TCP/IP patch instead of the TCP Optimizer for automatic tweaking.
RWIN is not fully optimized (even though it is a comparatively large number). The unscaled RWIN value is lower than it should be. Also, RWIN being close to and above 65535 does not justify the header overhead of enabling TCP 1323 Options. You might want to use one of the recommended RWIN values below.

i tried the tcp/ip patch for vista , stell got the same prop.

[Bedo-2010]

fast only 2hr , 23 min and 20 sec it left plx?!

[coroneln]

Saudi and a lot of Emirates are behind a Proxy that controls the content to avoid people looking for porn and other forbiden stuff, that is the reason of your lag... I have been in those countries working and never been able to play any FPS from them

[Oddsodz]

May I ask. What monitor you have and a what refresh rate do you have it set too? IE 1920x1200@60hz

[coroneln]

Stop wasting your time HE IS BEHIND a COUNTRY PROXY cannot get better PING

Solution:
Move to a free country

[Bedo-2010]

??!?!?! lol free country wtf u talking about!? :S i could change my proxy i could enter porn sites if i want to its not about that at all , and my moniter is lg kind i cant remember its name refresh rate is 60hz but plz try to help me

[Bedo-2010]

and again its not about the damn ping , i get 120 on uk servers and 120 is damn good

[Oddsodz]

??!?!?! lol free country wtf u talking about!? :S i could change my proxy i could enter porn sites if i want to its not about that at all , and my moniter is lg kind i cant remember its name refresh rate is 60hz but plz try to help me

OK. As you have an nVidia card on win7, there is a 60hz issue when it clocks down to 5.9454343. This gives you micro GFX lag. This is only in Win7.

**Windows 7 59hz (60hz) workaround** FIX IN HERE! - Overclock.net - Overclocking.net


I Had this myself. the fix was to make a custom res and up the 60hz to 60.002hz

[coroneln]

Sir there is more to lag than ping...

A ping of 100 means the server is giving you the status of the 3d world 100 msec after stuff happened in the world, so you might be already dead when you saw the guy and started shooting at it.

Now the shuttering is not related to ping as even if ping is high you should have a steady flow of netowrk packets coming from the 3d world to your gzme client.

Shuttering happens when the packets or some of them get lost in between the server and you, or when the burst between your cpu processing the net packets and the output of your video card to your screen are bottlenecked.

BUT Shuttering happens the most often with slow network connections as tcp/ip may drop packets that time out. then you have a matrix like deja vu in the 3d world...

So yes you can visit blocked sites using a proxy, but that is not Real time 3d simulation.

Having to go trought a proxy means your packets both outgoing as incoming are being analized to ensure you are not doing something wrong.

This is an extra step that may cause the game to assume the packet got lost in the wire and decide to ignore it and process the next packet... thus the shuttering jump.

If you dont beleive me then do 2 tests:

1) take your pc to europe and try playing from a country with out the proxy.

2) spend 10.000$ in a brand new state of the art pc and try to play in your country.

The proxy will not go away....

[Bedo-2010]

First thing type only usefull coments plz not like cononeln who said to stop helping me :S , and my p.c can run any game on ultra and i told u i dont have any problem on any other online games!!! so read first plz! , and on the 60hz thing fix i will try it right now thx for helping

[Bedo-2010]

i dont get how to set my options like that it doesnt allow me! but i got 60 hz not 50 , in the new p.r patch its MUCH better , but stell there and here oh and the cpu thing realy helps i dont know if bf2 hates my processore cpus or what thx for trying to help mate realy

[Bedo-2010]

fast thing , when i edit the hz in the nvdia control pannel to 61 or 62 it changes back to 60 ! , alot of replies from me i know but sorry just want u guys to be up-to-date and thx again and help me or else i will go back to my old p.c and bleave me u dont want that to happen xD

[Chase Armitage]

Look mate there is a lot of connection related issues out there since the release which I think are bound to specific maps rather than to problems of individual persons. That also ties in perfectly with you saying your ping that usually gets the job done is still the same but now you have this shuttering.
I experience the same. Just now I dc'ed from UK Warfare because Dragon Fly was unplayable due to packet loss and since my ping is perfectly fine at a 30 to 35ms and my framerate is of no concern to me (i7 [email protected]/4GB DDR3/HD5870) it must be server-sided. Also everybody on the server had those issues. What I think needs to be done is some proper looking into this by the devs. Dont think there is much you can do on your end.

[Bedo-2010]

hmm , come on devs , any one got a cool idea?

[Bedo-2010]

come on plz?! , 2 days and no new answer ?! am just posting thise again so it will be updated to the first page but plzzzzzz help

[LeChuckle]

do you get the problem when you dont touch the affinity? using all cores in other words, which is default

[ttechr]

I had a problem with lag. Just to see if this works try disabling Windows Aero.
Right click on your desktop and choose Personalize. Next choose Windows Basic as your theme.

Try that out and let us know how it is.