I is buying RAM and PSU

Discussion on Computer Hardware & Custom Builds
Post Reply
Doc.Pock
Posts: 2899
Joined: 2010-08-23 14:53

I is buying RAM and PSU

Post by Doc.Pock »

so right to business

RAM:
Corsair 4GBx2 - would cost me 40 euro together
or
Kingston 8GB kit(2x4GB) x1 - would cost me 47 euro

which one?

also for the PSU:

i have no idea with these. i need it to power
intel [email protected]
GeForce 250GTS (and certainly something better in the future)
2 SATA drives
1 SATA CD/DVD unit
4 fans (maybe more in future)
intel dh57dd motherboard
one of the above RAM unnits + 2x2GB i already have inside


thank you very much

DP
Cossack
Posts: 1689
Joined: 2009-06-17 09:25

Re: I is buying RAM and PSU

Post by Cossack »

Corsair value RAM can't run with HyperX series, so go with Kingston.

About PSU - any 500-600W PSU will do (from good manufacturer of course: That would be Corsair, OCZ, Seasonic :mrgreen: , etc. ).
Image
Doc.Pock
Posts: 2899
Joined: 2010-08-23 14:53

Re: I is buying RAM and PSU

Post by Doc.Pock »

Ive been thinking this then
CORSAIR NAPAJALNIK ATX 500W
Cossack
Posts: 1689
Joined: 2009-06-17 09:25

Re: I is buying RAM and PSU

Post by Cossack »

Yeah, that would do.
Image
Doc.Pock
Posts: 2899
Joined: 2010-08-23 14:53

Re: I is buying RAM and PSU

Post by Doc.Pock »

Good. 110€ lighter my wallet will be then :)
A.Finest
Posts: 776
Joined: 2011-06-07 12:27

Re: I is buying RAM and PSU

Post by A.Finest »

Means we can get that map finished then :D
MaSSive
Posts: 4502
Joined: 2011-02-19 15:02

Re: I is buying RAM and PSU

Post by MaSSive »

Cossack112 wrote:Corsair value RAM can't run with HyperX series, so go with Kingston.
Now where did you get that from? If you mean on clocks then I can understand but it should run with it.

Pock if you have HyperX then its the best to buy identical ram sticks and dont go with other manufacturer or model.

So HyperX is Kingston but you need to know which ones exactly ( CAS latency - 9-9-9-24-2T etc. ) and then go buy new ones. Of course slighly different latencies wont hurt but as long as its same density or manufacturer.
Image
CATA4TW!

"People never lie so much as before an election, during a war, or after a hunt."
"God has a special providence for fools, drunks, and the United States of America."
― Otto von Bismarck
Cossack
Posts: 1689
Joined: 2009-06-17 09:25

Re: I is buying RAM and PSU

Post by Cossack »

No Massive - I was comparing them... ;) Of course you can put multiple manufacturer RAM sticks on one mobo, but the OC will be messed up really hard. ;)
Image
Doc.Pock
Posts: 2899
Joined: 2010-08-23 14:53

Re: I is buying RAM and PSU

Post by Doc.Pock »

Code: Select all

Memory Summary	Reported by BIOS
Memory Type	DDR3
Installed Memory	4096 MBytes
Available Memory	4030 MBytes
Channels	Dual
Maximum Capacity	16384 MBytes
Maximum Memory Module Size	[unknown]
Memory Slots	4
Error Correction	None
Memory Timings
DRAM Frequency	666.7 MHz
CAS# Latency (CL)	9.0
RAS# to CAS# Delay (tRCD)	9
RAS# Prechange (tRP)	9
Cycle Time (tRAS)	24
Command Rate	1T

Code: Select all

Device Locator	Slot 1
Memory Type	DDR3 [PC3-10600]
Manufacturer	Kingston
Model	9905403-083.A00LF
Serial Number	4F28789A
Capacity	2048 MBytes
Speed	667 MHz (667 x 2 = 1333)
Manufacturing Date	2009, Week 47
EPP SPD Support	No
XMP SPD Support	No
Supported Frequencies	457 MHz, 533 MHz, 609 MHz, 685 MHz
Memory Timings
JEDEC #1	6.0-6-6-17-23 at 457 MHz, at 1.5 Volts (CL-RCD-RP-RAS-RC)
JEDEC #2	7.0-7-7-20-27 at 533 MHz, at 1.5 Volts (CL-RCD-RP-RAS-RC)
JEDEC #3	8.0-8-8-22-31 at 609 MHz, at 1.5 Volts (CL-RCD-RP-RAS-RC)
JEDEC #4	9.0-9-9-25-34 at 685 MHz, at 1.5 Volts (CL-RCD-RP-RAS-RC)

Code: Select all

Device Locator	Slot 2
Memory Type	DDR3 [PC3-10600]
Manufacturer	Kingston
Model	9905403-083.A00LF
Serial Number	4D28819A
Capacity	2048 MBytes
Speed	667 MHz (667 x 2 = 1333)
Manufacturing Date	2009, Week 47
EPP SPD Support	No
XMP SPD Support	No
Supported Frequencies	457 MHz, 533 MHz, 609 MHz, 685 MHz
Memory Timings
JEDEC #1	6.0-6-6-17-23 at 457 MHz, at 1.5 Volts (CL-RCD-RP-RAS-RC)
JEDEC #2	7.0-7-7-20-27 at 533 MHz, at 1.5 Volts (CL-RCD-RP-RAS-RC)
JEDEC #3	8.0-8-8-22-31 at 609 MHz, at 1.5 Volts (CL-RCD-RP-RAS-RC)
JEDEC #4	9.0-9-9-25-34 at 685 MHz, at 1.5 Volts (CL-RCD-RP-RAS-RC)
this is what SIW tells me
MaSSive
Posts: 4502
Joined: 2011-02-19 15:02

Re: I is buying RAM and PSU

Post by MaSSive »

Those modules you wish to buy are running at 9-9-9-27 @800 Mhz which you cant achieve since your old ones run @667 9-9-9-24

http://www.ec.kingston.com/ecom/configu ... 2/8GX&id=1

Not recommended. Im still searching compatibles on that site.

Edit: Compatibles

http://www.pixmania.si/si/uk/4909539/ar ... c3-10.html

http://www.pixmania.si/si/uk/9716795/ar ... c3-10.html

First is KVR second is KHX
Last edited by MaSSive on 2012-07-01 08:21, edited 1 time in total.
Image
CATA4TW!

"People never lie so much as before an election, during a war, or after a hunt."
"God has a special providence for fools, drunks, and the United States of America."
― Otto von Bismarck
Doc.Pock
Posts: 2899
Joined: 2010-08-23 14:53

Re: I is buying RAM and PSU

Post by Doc.Pock »

ok. thnx for the info
Doc.Pock
Posts: 2899
Joined: 2010-08-23 14:53

Re: I is buying RAM and PSU

Post by Doc.Pock »

KillJoy[Fr]
Posts: 837
Joined: 2010-12-28 20:51

Re: I is buying RAM and PSU

Post by KillJoy[Fr] »

I have a Corsair Cx 600 watts v2 power supply its run perfecly fully silent its cost me only 60euro
Au dela du possible ...
Doc.Pock
Posts: 2899
Joined: 2010-08-23 14:53

Re: I is buying RAM and PSU

Post by Doc.Pock »

yes it'd cost me 67€ but i really dont want to go much over my original budget which got over already
MaSSive
Posts: 4502
Joined: 2011-02-19 15:02

Re: I is buying RAM and PSU

Post by MaSSive »

'[USF wrote:Doc.Pock;1789529']have bad expirience with pixmania.

http://www.valueram.com/datasheets/KHX1333C9D3B1_4G.pdf
thisone ok? if i take two, as it looks like the KHX one you posted but not in a kit
Its ok go for it.
Image
CATA4TW!

"People never lie so much as before an election, during a war, or after a hunt."
"God has a special providence for fools, drunks, and the United States of America."
― Otto von Bismarck
Doc.Pock
Posts: 2899
Joined: 2010-08-23 14:53

Re: I is buying RAM and PSU

Post by Doc.Pock »

well bought the stuff, will install in the next days...

on a diffrent note, my mate asked for my help with a screen and mouse keyboard.
for the screen i was thinking PHILIPS 247E3LSU/00 for 170€ here.


and formouse keyboard he wants something gaming but not over 100€ combined and i havent had enought time to thouroughly check the options and stuff, thinking maybe a RAT5 and a G105 combo but then again its over 100€ so id be glad if you guys would give an insight

thnx for help
DP
Doc.Pock
Posts: 2899
Joined: 2010-08-23 14:53

Re: I is buying RAM and PSU

Post by Doc.Pock »

okay basically will recommend him this.

PHILIPS 247E3LSU E-line LED 24" Screen for 156€

ROCCAT Kova+ Optical Gaming Mouse for 45.5€ i read some reviews on it and all say its good.

Logitech G105 Keyboard for 52€
Post Reply

Return to “Hardware”