Mumble Audio Cues not working no matter what settings

[007.SirBond]

While that what you're saying is true, the thing is that after playing with PRMumble settings and lowering bandwidth requirement everything works fine as expected.

Exclusiveness is fine for me, and that is subjective completely. If I run PR I have PRMumble to communicate in game, and I dont need any other voice program distracting me.

Hmm I lowered the bandwidth through the setup wizard. I still don't receive audio cues. Unless I check the audio cue boxes in the PRmumble options, then I recieve audio cues; However I believe these are the incorrect audio cues used from mumble itself. Before, when my audio cues were working. They were more like static radio noise. These ones from mumble are different. I think the issue is with the launcher itself.

[HunterMed]

Hmm I lowered the bandwidth through the setup wizard. I still don't receive audio cues. Unless I check the audio cue boxes in the PRmumble options, then I recieve audio cues; However I believe these are the incorrect audio cues used from mumble itself. Before, when my audio cues were working. They were more like static radio noise. These ones from mumble are different. I think the issue is with the launcher itself.

Yep had the same issue! I had that normal mumble beep and the audio cues at the same time then.
Then I disabled the MUMBLE audio cues again and had the regular radio noise cues working. I have no idea why or how but now it works. Also I checked and unchecked the "exclusive" thing. So all I did was check and uncheck everything and it worked lol

[MaSSive]

^ What Hunter said.

If both are checked you wont be able to hear PR cues because they sound too low. I think they should be amplified. I'm not sure if they're connected to any audio setting in BF2, so try increasing some of the settings in Audio CP inside BF2.

Im hearing both and its fine for now, but as I said PR cues should be louder.

Clearly launcher is not an issue, if it works for me and for some other people then it should work for all. Its your PC then. Might be permissions, might be sound settings, sound setup you have ( 2.0; Quad; 5.1;7.1; ) etc..

[007.SirBond]

Alright, I have fixed the issue.

I had speaker fill enhancement enabled through my sound drivers. Once I disabled that, I now receive audio cues again. I think the problem was PR mumble has a limited bandwidth for using audio cues or whatever and using speaker fill enhancement was buffering the audio with too high of a bandwidth for the launcher to correctly use.

[MaSSive]

Audio cues are not transmitted over network, so you're not receiving/sending them. They function locally on the client. I'm not sure but since they are in common_client.zip it should be that way.

[HunterMed]

LOL right after posting here yesterday they did not work again

[Vulture]

I still have the same issue, the cues are not heard.
Updated every driver, reinstalled PR, no cues ingame.
Also the sounds in the vehicles are LOUD, I cannot understand what the others in the same vehicle are saying to each other (they don't seem to have this problem).

[OldGoat5]

same log

Code: Select all

Project Reality Log File
PRLauncher.exe started at: 2013-10-24T14:34:48

Warning: Unable to load audio cue's

 > AlreadyAllocated calling waveOutOpen

Code: Select all

System Information
------------------
  Operating System: Microsoft Windows 7 Professional  (6.1.7601)
      Architecture: 64-bit
          Language: English (United States)
       Motherboard: Dell Inc. 0YR8NN
         Processor: Intel(R) Core(TM) i7-2630QM CPU @ 2.00GHz (Physical: 4, Logical: 8)
            Memory: 8.00 GB
      DIMM Modules: ChannelA-DIMM0: 4.00 GB @ 1333 MHz
                    ChannelB-DIMM0: 4.00 GB @ 1333 MHz
         Page File: 7.89 GB
    .NET Framework: 4.0

Display Information
-------------------
 Display Device(s): Generic PnP Monitor on NVIDIA GeForce GT 525M 
                    Generic PnP Monitor on Intel(R) HD Graphics Family
   Display Mode(s): 1920 x 1080 (32 bit) @ 60 Hz
                    1920 x 1080 (32 bit) @ 60 Hz
    Driver Version: 9.18.13.2049 (320.49)
    Display Memory: 1024.00 MB
     Multisampling: 2, 4, 8
               DPI: 120 (125%)

Audio Information
-----------------
  Primary Playback: Speakers (Realtek High Definiti
 Primary Recording: Microphone (Realtek High Defini
               EAX: True
           EAX 1.0: False
           EAX 2.0: True
           EAX 3.0: False
           EAX 4.0: False
           EAX 5.0: False
             X-RAM: False

Disk Information
----------------
      Install Path: C:\Program Files (x86)\Steam\steamapps\common\Battlefield 2
                    Free: 373.26 GB, Total: 683.89 GB, NTFS
          Mod Path: C:\Program Files (x86)\Steam\steamapps\common\Battlefield 2\mods\pr
                    Free: 373.26 GB, Total: 683.89 GB, NTFS
     Profiles Path: C:\Users\michael\Documents\ProjectReality\Profiles
                    Free: 373.26 GB, Total: 683.89 GB, NTFS
    Update DL Path: C:\Users\michael\AppData\Local\Project Reality\Project Reality BF2\Downloads
                    Free: 373.26 GB, Total: 683.89 GB, NTFS
   Update Log Path: C:\Users\michael\AppData\Local\Project Reality\Project Reality BF2\UpdateLogs
                    Free: 373.26 GB, Total: 683.89 GB, NTFS

Game Information
----------------
      CD Key Valid: True
    Installed Mods: bf2, pr, xpack
       Current Mod: pr
       BF2 Version: BF2 1.5
        PR Version: 1.0.36.0
          Language: english
   Debug Available: False
     Large Address: True
Supported Hardware: None

Profile Information
-------------------
      Profile 0001: explodinglam
              Type: Online
        View Intro: False
        Fullscreen: True
      Display Mode: 1920x1080@60Hz
Display Mode Valid: True
   Graphics Scheme: High
     Multisampling: Off
             VSync: False
   Terrain Quality: High
   Effects Quality: High
  Geometry Quality: High
   Texture Quality: High
  Lighting Quality: High
   Dynamic Shadows: High
    Dynamic Lights: High
 Texture Filtering: High
    Audio Provider: Hardware
    Provider Valid: True
     Audio Quality: High
               EAX: True

      Profile 0002: OldGoat5
              Type: Online
 Last Used Profile: True
        View Intro: False
        Fullscreen: True
      Display Mode: 1920x1080@60Hz
Display Mode Valid: True
   Graphics Scheme: High
     Multisampling: Off
             VSync: False
   Terrain Quality: High
   Effects Quality: High
  Geometry Quality: High
   Texture Quality: High
  Lighting Quality: High
   Dynamic Shadows: High
    Dynamic Lights: High
 Texture Filtering: High
    Audio Provider: Hardware
    Provider Valid: True
     Audio Quality: High
               EAX: True

update:

Right click on the sound icon, playback devices.
Checking the disable box in this menu worked to restore them for me for now. before, the immediate check box was checked. The rest were unchecked previously.