Mumble disconnected sign

[Smikis Pikis]

It used to be fine until a map change came once and on the next map my mumble was disconnected. This isssue only exists on the Merk server and not sure how to resolve it. I've tried the TCP mode and QoS.

[LITOralis.nMd]

Only a problem on one server?


Recreate the problem on the MERK server, note the time, then immediately exit PR.

Go to:
C:\Users\[USERNAME]\AppData\Roaming\Project Reality\Project Reality Mumble
and open
Console.txt

Scroll all the way to the bottom, to the timestamps you noted above,
copy the last 30 or so lines, you should see words like "FAIL" or "ERROR" or "NO HOOK"

paste all of that into this thread,

[Smikis Pikis]

W>2013-11-08 18:08:05.975 DirectSound: Disabled as WASAPI is available
<W>2013-11-08 18:08:05.978 CELT bitstream 8000000b from D:/Program Files/EA GAMES/Battlefield 2/mods/pr/bin/PRMumble/celt0.0.7.0.dll
<W>2013-11-08 18:08:05.981 CELT bitstream 80000010 from D:/Program Files/EA GAMES/Battlefield 2/mods/pr/bin/PRMumble/celt0.0.11.0.dll
<W>2013-11-08 18:08:05.981 Locale is "lt_LT" (System: "lt_LT")
<W>2013-11-08 18:08:06.272 Database SQLite: "3.7.7.1"
<W>2013-11-08 18:08:06.272 Overlay mumble_ol.dll failed to load
<W>2013-11-08 18:08:06.273 Overlay: Listening on "\\.\pipe\MumbleOverlayPipe"
<W>2013-11-08 18:08:06.440 GlobalShortcutWin: No LowLevelHooksTimeout registry key found.
<W>2013-11-08 18:08:06.498 QMetaObject::invokeMethod: No such method MainWindow::setupView(bool)
<W>2013-11-08 18:08:06.498 QMetaObject::invokeMethod: No such method MainWindow::updateTrayIcon()
<W>2013-11-08 18:08:06.503 AudioInput: 40000 bits/s, 48000 hz, 480 sample
<W>2013-11-08 18:08:06.509 WASAPIInput: Latencies 100000 30000 => 100000
<W>2013-11-08 18:08:06.512 WASAPIOutput: Latencies 100000 30000 => 100000
<W>2013-11-08 18:08:06.523 OpenSSL Support: 1 (OpenSSL 1.0.0d 8 Feb 2011)
<W>2013-11-08 18:08:06.534 ServerHandler: QOS2 loaded
<W>2013-11-08 18:08:06.550 WASAPIInput: Stream Latency 58050 (882)
<W>2013-11-08 18:08:06.550 AudioInput: Initialized mixer for 2 channel 44100 hz mic and 0 channel 48000 hz echo
<W>2013-11-08 18:08:06.554 WASAPIOutput: Stream Latency 116100 (882)
<W>2013-11-08 18:08:06.554 WASAPIOutput: Periods 10000us 3000us (latency 11610us)
<W>2013-11-08 18:08:06.554 WASAPIOutput: Buffer is 20000us (1)
<W>2013-11-08 18:08:06.554 AudioOutput: Initialized 2 channel 44100 hz mixer
<W>2013-11-08 18:08:06.555 Adding device {6f1d2b60-d5a0-11cf-bfc7-444553540000} Mouse Mouse:5
<W>2013-11-08 18:08:06.555 Adding device {6f1d2b61-d5a0-11cf-bfc7-444553540000} Keyboard Keyboard:127
<W>2013-11-08 18:08:06.623 Adding device {f6d3e420-e714-11e2-8001-444553540000} Logitech USB Headset H340 Logitech USB Headset H340:3
<W>2013-11-08 18:08:06.961 ServerHandler: Failed to remove UDP from QoS

See if this is what you require.

[LITOralis.nMd]

You got a USB headset.

If you have a regular 3.5mm jack set of headphones/speakers and 3.5mm mic, please plug those in and make them the default audio output and input devices. reboot, then try PRmumble again.

[Smikis Pikis]

isn't related with my headphones, I've been using them before this happened, therefore I doubt there's an issue revolving them

[LITOralis.nMd]

PRMumble-Settings->Advanced tickbox ticked->Network Tab->Remove the tickbox for "Use Quality of Service", click Apply.
test.

[Smikis Pikis]

You're just suggesting me those cliche solutions, either way I've tried that as OP states.

The issue occured straight after a map change, before that I was playing properly with mumble working.