Ask the PR:F Team a Question

General discussion of the Project Reality Falklands modification.
Locked
PLODDITHANLEY
Posts: 3608
Joined: 2009-05-02 19:44

Re: Ask the PR:F Team a Question

Post by PLODDITHANLEY »

What on earth is that? a bomb trolley?
Last edited by PLODDITHANLEY on 2016-02-16 00:29, edited 1 time in total.
Image
Rhino
Retired PR Developer
Posts: 47909
Joined: 2005-12-13 20:00

Re: Ask the PR:F Team a Question

Post by Rhino »

PLODDITHANLEY wrote:What on earth is that? a bomb trolley?
Nope, but slightly on the right track, for part of it anyways ;)
Image
PLODDITHANLEY
Posts: 3608
Joined: 2009-05-02 19:44

Re: Ask the PR:F Team a Question

Post by PLODDITHANLEY »

The tyres could be the front and rear of a Harrier but where's the rest? Could it be part like the underside of a FRS1 - but weren't they all grey back then?
The silver bit could be the orientable nozzles? But the green bit....and the rectangular intricate bits.....

The Anchor point implies something on deck or a tow point - I assume they didn't need a airplane tow vehicle with all the Navy guys around....

Hope someone could put me out of my misery.

REPOST to encourage helpers:

Image

Found a tractor:

Image
Last edited by PLODDITHANLEY on 2016-02-22 03:10, edited 1 time in total.
Image
Rhino
Retired PR Developer
Posts: 47909
Joined: 2005-12-13 20:00

Re: Ask the PR:F Team a Question

Post by Rhino »

hehe, wheels probably throwing you off a little too much, and there are a few clues here and there outside of that picture and this thread ;)

Biggest clue however is in the colour, not many things are painted that colour ;)
Last edited by Rhino on 2016-02-22 07:35, edited 1 time in total.
Image
Hornster
Posts: 10
Joined: 2014-05-26 18:17

Re: Ask the PR:F Team a Question

Post by Hornster »

Sea Lynx???? <3

Image
Rabbit
Posts: 7818
Joined: 2006-12-17 15:14

Re: Ask the PR:F Team a Question

Post by Rabbit »

Hornster wrote:Sea Lynx???? <3

Image
Yus, I mean he did say tide me over with the FRIGATE.
Image

AfSoccer "I just don't see the natural talent."
Image
Raklodder
Posts: 940
Joined: 2013-04-22 08:36

Re: Ask the PR:F Team a Question

Post by Raklodder »

I'm sorry for asking again, but will Project Reality v1.4 get delayed due to your extensive work on Falkland Islands?
Rhino
Retired PR Developer
Posts: 47909
Joined: 2005-12-13 20:00

Re: Ask the PR:F Team a Question

Post by Rhino »

Raklodder wrote:I'm sorry for asking again, but will Project Reality v1.4 get delayed due to your extensive work on Falkland Islands?

The core feature of v1.4 is PR:Falklands so they are one of the same thing :p
Image
Raklodder
Posts: 940
Joined: 2013-04-22 08:36

Re: Ask the PR:F Team a Question

Post by Raklodder »

[R-DEV]Rhino wrote:The core feature of v1.4 is PR:Falklands so they are one of the same thing :p
Thank you kindly for your update.

I will keep my mouth shut now.
Rhino
Retired PR Developer
Posts: 47909
Joined: 2005-12-13 20:00

Re: Ask the PR:F Team a Question

Post by Rhino »

No need to "shut your mouth", tbh I would rather the community where fully in the loop with what is going on than not.

As for your earlier question on:
'Raklodder' wrote:will Project Reality v1.4 get delayed due to your extensive work on Falkland Islands?
Well I feel I should update you guys on the fact that yes, v1.4 has suffered from serious delays due to some r/l stuff over the last few months.

Firstly I've had to format my PC three times over the past four months due to a failing hard drive which finally totally gave up the ghost this week and I've now replaced with a new 3TB one. Luckily no PR work etc has been lost since firstly, its all backed up online and on other PCs and secondly, the hard drive that failed was one which I only had programs and temporary files installed on. But each time this has happened its taken around a week to get my PC up to a state with everything installed and setup to how I like, to be able to do any significant PR work again and in all has cost around 2 to 3 weeks from the initial format in November, which was mostly down to a power surge and probably also what put my 7 year HDD on its last legs, but didn't work that out until this week where it fully stopped working :p

Secondly the recent DDOS attacks on our servers put the entire team under pressure and for we lost about a weeks worth of working time sorting that out.

But lastly, two weeks ago my family caught a seriously nasty strain of the flu. Not only did this mean that I was bed stricken for a week, with also still somewhat recovering from it now and seriously lowering my energy to do much, but worst of all it has put my Dad, who was pretty fit and healthy, into hospital due to complications from this flu strain, resulting in him having a very low blood oxygen level, resulting on him being put on Oxygen in the Intensive Care Unit. Luckily he has recovered a little and is now out of the ICU but is still in hospital and still on Oxygen, and the doctors have tested for every known strain of the flu (bird flu, swine flu, etc, etc) but this is some kind of unknown strain, that resulted in him having a partially collapsed lung as well as other issues. But ye, he seems to be recovering slowly now which is good but he is going to be very weak for some time, which means that I'm having to take on a lot more jobs for the family business and will result in me having less time for PR work over the next few months.

All these things together has thrown off my original time table pretty drastically, which is why I haven't been able to meet my "new update every week" statement I made back in January, and this is also the reason why we never put out any solid release dates until we are very close to releasing, as r/l things like this can totally throw off these dates. But the entire team is still working really hard on the v1.4 release, with naturally Falklands content being a big part of that which all the devs are working on, but its going to be a bit before everything is ready for a full release

Cheers.
Image
Dockside_Bars
Posts: 5
Joined: 2015-09-08 17:23

Re: Ask the PR:F Team a Question

Post by Dockside_Bars »

[R-DEV]Rhino wrote:No need to "shut your mouth", tbh I would rather the community where fully in the loop with what is going on than not.

As for your earlier question on:


Well I feel I should update you guys on the fact that yes, v1.4 has suffered from serious delays due to some r/l stuff over the last few months.

Firstly I've had to format my PC three times over the past four months due to a failing hard drive which finally totally gave up the ghost this week and I've now replaced with a new 3TB one. Luckily no PR work etc has been lost since firstly, its all backed up online and on other PCs and secondly, the hard drive that failed was one which I only had programs and temporary files installed on. But each time this has happened its taken around a week to get my PC up to a state with everything installed and setup to how I like, to be able to do any significant PR work again and in all has cost around 2 to 3 weeks from the initial format in November, which was mostly down to a power surge and probably also what put my 7 year HDD on its last legs, but didn't work that out until this week where it fully stopped working :p

Secondly the recent DDOS attacks on our servers put the entire team under pressure and for we lost about a weeks worth of working time sorting that out.

But lastly, two weeks ago my family caught a seriously nasty strain of the flu. Not only did this mean that I was bed stricken for a week, with also still somewhat recovering from it now and seriously lowering my energy to do much, but worst of all it has put my Dad, who was pretty fit and healthy, into hospital due to complications from this flu strain, resulting in him having a very low blood oxygen level, resulting on him being put on Oxygen in the Intensive Care Unit. Luckily he has recovered a little and is now out of the ICU but is still in hospital and still on Oxygen, and the doctors have tested for every known strain of the flu (bird flu, swine flu, etc, etc) but this is some kind of unknown strain, that resulted in him having a partially collapsed lung as well as other issues. But ye, he seems to be recovering slowly now which is good but he is going to be very weak for some time, which means that I'm having to take on a lot more jobs for the family business and will result in me having less time for PR work over the next few months.

All these things together has thrown off my original time table pretty drastically, which is why I haven't been able to meet my "new update every week" statement I made back in January, and this is also the reason why we never put out any solid release dates until we are very close to releasing, as r/l things like this can totally throw off these dates. But the entire team is still working really hard on the v1.4 release, with naturally Falklands content being a big part of that which all the devs are working on, but its going to be a bit before everything is ready for a full release

Cheers.
I'm sorry to hear that, I assume I speak for everyone when we wish you and your family (your father especially) the speediest of recoveries. Thank you for your honesty in regards to this update, and although I am a little disappointed to hear that, I understand real life can really throw some curveballs. Get to feeling better and make what progress you can. This community isn't going anywhere!
PuffinParty
Posts: 1
Joined: 2016-03-11 22:40

Re: Ask the PR:F Team a Question

Post by PuffinParty »

[R-DEV]Rhino wrote: But lastly, two weeks ago my family caught a seriously nasty strain of the flu. Not only did this mean that I was bed stricken for a week, with also still somewhat recovering from it now and seriously lowering my energy to do much, but worst of all it has put my Dad, who was pretty fit and healthy, into hospital due to complications from this flu strain, resulting in him having a very low blood oxygen level, resulting on him being put on Oxygen in the Intensive Care Unit. Luckily he has recovered a little and is now out of the ICU but is still in hospital and still on Oxygen, and the doctors have tested for every known strain of the flu (bird flu, swine flu, etc, etc) but this is some kind of unknown strain, that resulted in him having a partially collapsed lung as well as other issues. But ye, he seems to be recovering slowly now which is good but he is going to be very weak for some time, which means that I'm having to take on a lot more jobs for the family business and will result in me having less time for PR work over the next few months.
Cheers.
Hi Rhino, I haven't posted before but recently decided to give PR a try and love it. I just want to say that while we all appreciate your contributions to this great mod, family comes first. Please take the time you need to be with and there for your family. We'll all be here when you're ready to make a triumphant return!
happygoogleboy
Posts: 56
Joined: 2016-03-12 14:40

Re: Ask the PR:F Team a Question

Post by happygoogleboy »

Dear PR devs,

As a long long time fan or your amazing game and the right arm of the free world, I was wondering, have you ever thought about making the fal sights a little less........bad? The G3 iron sights are by far and away the best irons in the game and make playing mec on muttrah or sbeneh a real treat. But the fal.......that fat front post and that rear aperture that obscures just the wrong part of the screen. Also it seems to have significantly more recoil than the G3, although if I'm wrong and its just me then fair enough.

Thank you.
X1 Spriggan
Retired PR Developer
Posts: 427
Joined: 2007-08-31 04:24

Re: Ask the PR:F Team a Question

Post by X1 Spriggan »

So sorry to hear about those troubles Rhino. I hope things start to turn around for you. Looking forward to the update!

[17:21] Falkun: im making spaghetti
[17:21] Falkun: lal
[17:22] Falkun: i'll put some in an envelope for you
Rhino
Retired PR Developer
Posts: 47909
Joined: 2005-12-13 20:00

Re: Ask the PR:F Team a Question

Post by Rhino »

Cheers guys for the support :)

My dad is finally out of Hospital now, still no idea what type of flu it was but he was finally diagnosed this week with interstitial pneumonia which wasn't a result of the flu, but the flu weekend his immune system for it to become apparent and could be a result of a lot of things, which waiting for the test results on still to determine exactly what, but is much better now and should be curable but will be some time before he is 100% again.


Anyways almost back into the swing of things myself and another little tease for you guys, shouldn't be hard to guess what this one is ;)

Diffuse:
Image

Normal:
Image

Spec:
Image

happygoogleboy wrote:Dear PR devs,

As a long long time fan or your amazing game and the right arm of the free world, I was wondering, have you ever thought about making the fal sights a little less........bad? The G3 iron sights are by far and away the best irons in the game and make playing mec on muttrah or sbeneh a real treat. But the fal.......that fat front post and that rear aperture that obscures just the wrong part of the screen. Also it seems to have significantly more recoil than the G3, although if I'm wrong and its just me then fair enough.

Thank you.
Ye, our FN FAL model is unfortunately pretty bad all round with lots of errors, both modelling/uv/texturing errors, as well as errors to the real life design, and I had hoped we would have been able totally replace it with a new model but unfortunately, we haven't been able to :(

We might be able to look into improving the irons a little for the next release thou ;)
Image
anantdeathhawk
Posts: 641
Joined: 2015-11-12 21:11

Re: Ask the PR:F Team a Question

Post by anantdeathhawk »

A torpedo launcher or a big canon.
Micael
Posts: 11
Joined: 2016-01-22 22:14

Re: Ask the PR:F Team a Question

Post by Micael »

we need this
mries
Posts: 475
Joined: 2013-06-30 16:16

Re: Ask the PR:F Team a Question

Post by mries »

Deep, deep inside me I am praying that 1.4 will be released this Saturday, 2nd of April, the date 14 (edit oops: 34) years ago that the Falkland war officially started.

But then reality strikes and it is probably way to soon?.. June 14th then? Ending of the war and 14 (edit oops: 34) years ago, would be a nice combo.
Last edited by mries on 2016-03-31 06:32, edited 1 time in total.
Image

Image
camo
PR:BF2 Developer
Posts: 3165
Joined: 2013-01-26 09:00

Re: Ask the PR:F Team a Question

Post by camo »

14 years?
Image
Ratface
Retired PR Developer
Posts: 962
Joined: 2011-04-21 18:57

Re: Ask the PR:F Team a Question

Post by Ratface »

*34

2016 - 1982 = 34 :D
Locked

Return to “PR:Falklands General Discussion”