I'm playing PR at home with my old laptop,it always lag while I facing to lot of house or people or trees...,and it was played well while PR1.0. so I checked the setting file "video.con" in "mydocuments" fold.the settings are all set 2,and can't change to 1.
so can anybody tell me if it's the new version's control of these settings?can I change it or not?
Intel(R) Core(TM)2 Duo CPU 2.2GHz,8GB RAM,Nvidia 130M card.
can I change the graphics setting to the lowest?
-
PLODDITHANLEY
- Posts: 3608
- Joined: 2009-05-02 19:44
Re: can I change the graphics setting to the lowest?
Launcher/support copy specs and compare with this which nearly the same and plays OK. Your graphics is better but cpu is worse plus mine <ocs by 16% to 2.8.
Profile 0001:
VideoSettings.setTerrainQuality 2
VideoSettings.setGeometryQuality 2
VideoSettings.setLightingQuality 2
VideoSettings.setDynamicLightingQuality 0
VideoSettings.setDynamicShadowsQuality 0
VideoSettings.setEffectsQuality 2
VideoSettings.setTextureQuality 2
VideoSettings.setTextureFilteringQuality 1
VideoSettings.setResolution 1440x900@60Hz
VideoSettings.setAntialiasing Off
VideoSettings.setViewDistanceScale 1
VideoSettings.setVideoOptionScheme 3
Code: Select all
System Information
------------------
Operating System: Microsoft Windows 10 Famille (10.0.10586)
Architecture: 64 bits
Current Culture: French (France)
Motherboard: MSI MS-1722
Processor: Intel(R) Core(TM)2 Duo CPU P8600 @ 2.40GHz (Physical: 2, Logical: 2)
Memory: 4,00 GB
Page File: 10,00 GB
.NET Framework: 4.6+ Release Build: 394254, Runtime: 4.0.30319.42000
Display Information
-------------------
Display Device(s): Generic PnP Monitor on NVIDIA GeForce 9600M GT
Display Mode(s): 1680 x 1050 (32 bit) @ 60 Hz
Driver Version: 9.18.13.4192 (341.92)
Display Memory: 512,00 MB
Multisampling: 2, 4, 8
DPI: 96 (100%)
Audio Information
-----------------
Primary Playback: Haut-parleurs (Realtek High Def
Primary Recording: Microphone (Realtek High Defini
Open AL Renderer: Software
EAX: True
EAX 1.0: False
EAX 2.0: True
EAX 3.0: False
EAX 4.0: False
EAX 5.0: False
X-RAM: False
Disk Information
----------------
Install Path: C:\Games\Project Reality BF2
Free: 93,93 GB, Total: 297,55 GB, FS: NTFS, SSD: False
Mod Path: C:\Games\Project Reality BF2\mods\pr
Free: 93,93 GB, Total: 297,55 GB, FS: NTFS, SSD: False
Profiles Path: C:\Users\Lydia\Documents\ProjectReality\Profiles
Free: 93,93 GB, Total: 297,55 GB, FS: NTFS, SSD: False
Update DL Path: C:\Users\Lydia\AppData\Local\Project Reality\Project Reality BF2\Downloads
Free: 93,93 GB, Total: 297,55 GB, FS: NTFS, SSD: False
Update Log Path: C:\Users\Lydia\AppData\Local\Project Reality\Project Reality BF2\UpdateLogs
Free: 93,93 GB, Total: 297,55 GB, FS: NTFS, SSD: False
Game Information
----------------
Installed Mods: pr
Current Mod: pr
Version: Standalone - 1.0
PR Version: 1.3.9.0
Language: english
Debug Available: False
Large Address: True
Supported Hardware: None
Profile Information
-------------------
Profile 0001: ploddit
Type: Online
View Intro: False
Fullscreen: True
Display Mode: 1440x900@60Hz
Display Mode Valid: True
Graphics Scheme: Custom
Multisampling: Off
VSync: False
Terrain Quality: Low
Effects Quality: Low
Geometry Quality: Low
Texture Quality: Medium
Lighting Quality: Low
Dynamic Shadows: Off
Dynamic Lights: Off
Texture Filtering: Low
Audio Provider: Software
Provider Valid: True
Audio Quality: Medium
EAX: True
VideoSettings.setTerrainQuality 2
VideoSettings.setGeometryQuality 2
VideoSettings.setLightingQuality 2
VideoSettings.setDynamicLightingQuality 0
VideoSettings.setDynamicShadowsQuality 0
VideoSettings.setEffectsQuality 2
VideoSettings.setTextureQuality 2
VideoSettings.setTextureFilteringQuality 1
VideoSettings.setResolution 1440x900@60Hz
VideoSettings.setAntialiasing Off
VideoSettings.setViewDistanceScale 1
VideoSettings.setVideoOptionScheme 3
Last edited by PLODDITHANLEY on 2016-06-09 09:21, edited 4 times in total.
-
symk0014
- Posts: 7
- Joined: 2008-08-29 09:27
Re: can I change the graphics setting to the lowest?
Code: Select all
System Information
------------------
Operating System: Microsoft Windows 7 旗舰版 (6.1.7601)
Architecture: 64-bit
Current Culture: Chinese (Simplified, PRC)
Motherboard: LENOVO KL1
Processor: Intel(R) Core(TM)2 Duo CPU T6600 @ 2.20GHz (Physical: 2, Logical: 2)
Memory: 8.00 GB
DIMM Modules: DIMM 1: 4.00 GB @ 400 MHz
DIMM 2: 4.00 GB @ 400 MHz
Page File: 7.96 GB
.NET Framework: 4.5.2, Runtime: 4.0.30319.34209
Display Information
-------------------
Display Device(s): 通用即插即用监视器 on NVIDIA GeForce GT 130M
通用即插即用监视器 on NVIDIA GeForce GT 130M
Display Mode(s): 1024 x 768 (32 bit) @ 60 Hz
1024 x 768 (32 bit) @ 60 Hz
1024 x 768 (32 bit) @ 60 Hz
1024 x 768 (32 bit) @ 60 Hz
Driver Version: 9.18.13.4072 (340.72)
Display Memory: 512.00 MB
Multisampling: 2, 4, 8
DPI: 96 (100%)
Audio Information
-----------------
Primary Playback: NVIDIA HDMI Out (NVIDIA High De
Primary Recording: 麦克风 (Realtek High Definition Au
Open AL Renderer: Software
EAX: True
EAX 1.0: False
EAX 2.0: True
EAX 3.0: False
EAX 4.0: False
EAX 5.0: False
X-RAM: False
Disk Information
----------------
Install Path: E:\game\Project Reality BF2
Free: 53.85 GB, Total: 78.13 GB, FS: NTFS, SSD: False
Mod Path: E:\game\Project Reality BF2\mods\pr
Free: 53.85 GB, Total: 78.13 GB, FS: NTFS, SSD: False
Profiles Path: D:\我的文档\ProjectReality\Profiles
Free: 2.05 GB, Total: 48.07 GB, FS: NTFS, SSD: False
Update DL Path: C:\Users\Administrator\AppData\Local\Project Reality\Project Reality BF2\Downloads
Free: 7.97 GB, Total: 49.59 GB, FS: NTFS, SSD: False
Update Log Path: C:\Users\Administrator\AppData\Local\Project Reality\Project Reality BF2\UpdateLogs
Free: 7.97 GB, Total: 49.59 GB, FS: NTFS, SSD: False
Game Information
----------------
Installed Mods: pr
Current Mod: pr
Version: Standalone - 1.0
PR Version: 1.3.9.0
Language: english
Debug Available: False
Large Address: True
Supported Hardware: None
Profile Information
-------------------
Profile 0001: symk0014
Type: Online
Last Used Profile: True
View Intro: True
Fullscreen: True
Display Mode: 1024x768@60Hz
Display Mode Valid: True
Graphics Scheme: Low
Multisampling: Off
VSync: True
Terrain Quality: Low
Effects Quality: Low
Geometry Quality: Low
Texture Quality: Low
Lighting Quality: Low
Dynamic Shadows: Low
Dynamic Lights: Low
Texture Filtering: Low
Audio Provider: Software
Provider Valid: True
Audio Quality: Medium
EAX: False
-
symk0014
- Posts: 7
- Joined: 2008-08-29 09:27
Re: can I change the graphics setting to the lowest?
thanks , I'll try it .
-
PLODDITHANLEY
- Posts: 3608
- Joined: 2009-05-02 19:44
-
viirusiiseli
- Posts: 1171
- Joined: 2012-02-29 23:53
Re: can I change the graphics setting to the lowest?
The DEVs and a part of the community thought that being able to play with the lowest settings gave an advantage too big to people who could've played with high graphics, so they removed the lowest settings.symk0014 wrote:the settings are all set 2,and can't change to 1.
so can anybody tell me if it's the new version's control of these settings?can I change it or not?
Doesn't make sense to me, but oh well. You'll just have to settle for buying a better PC
-
Gerfand
- Posts: 329
- Joined: 2015-11-02 15:24
Re: can I change the graphics setting to the lowest?
But now poor people w/ lower end PC(like me) is going to get a massive disavantage: >60fpsviirusiiseli wrote:The DEVs and a part of the community thought that being able to play with the lowest settings gave an advantage too big to people who could've played with high graphics, so they removed the lowest settings.
Doesn't make sense to me, but oh well. You'll just have to settle for buying a better PC![]()
Well maybe some of the settings can impact less in the gameplay than others, I mean like the texture of the ground or buildings
Also at least for me, I am in a college trying to make my father buy a better PC, but he will aways say that my job is to study not play video games (which is true, but...)
-
Bogatyr
- Posts: 91
- Joined: 2011-05-06 13:53
Re: can I change the graphics setting to the lowest?
If your CPU is bad but your GPU is good, then increasing the graphic settings will increase your FPS. The reason behind this is that the game uses one core from the CPU, which means that if you have a Quad core or an Octa core your cores are not being utilized. Once you lower the settings, most of the stuff is put on CPU rendering causing lower FPS. Once you increase the graphics, FPS increases too. Because the rendering is mostly on the GPU.Gerfand wrote:But now poor people w/ lower end PC(like me) is going to get a massive disavantage: >60fps
Well maybe some of the settings can impact less in the gameplay than others, I mean like the texture of the ground or buildings
Also at least for me, I am in a college trying to make my father buy a better PC, but he will aways say that my job is to study not play video games (which is true, but...)
On the other hand, I still get drops to 40 fps or so sometimes and have no problems playing. If your PC can't handle minimal PR requirements, it's time to upgrade.
