Joystick Problem
-
Elkkukissa
- Posts: 1
- Joined: 2017-03-05 11:44
Joystick Problem
Im using a Logitech Attack 3 which seems to be working fine with the binds but when i have set it up and tried to test it on Khamisiyah or Black gold on jets it seems to be working fine BUT when im in the air the plane rolls to the right when im not doing anything and during takeoff to the left. What Is the problem? my joystick is calibrated properly and i have played with this joystick in IL-2 1946 with successful results but the calibration in PR has some problem.
-
fpspromotion
- Posts: 300
- Joined: 2016-05-09 14:38
Re: Joystick Problem
Hi Guys,
Thank you for your participation, meanwhile I solved the problem.
It is also a bit stupid in the game control at BF2.
If you want to configure the key assignment, or the direction assignment in this case, you have to do this twice.
One for front and one for rear, one for right and one for left, one for right and one for left.
The big mistake here is that it has automatically recognized the control of / hi / re / li clockwise / counterclockwise, but could not execute because one axis was assigned only for one direction.
In principle, I have now occupied the axes twice and this is shared by the control.
So, for all who have not understood it (you have to be confronted with such a problem, so you go through):
Joystick take, software install and then under Windows test (is taken over automatically automatically from the driver software!)
Then go into the control assignment and assign EVERY direction of each joystick movement, even if the message comes up: "Key assignment appears twice!"
Use "ok" and you can play. If someone has still ask, he is allowed to contact me!
Thanks for your help,
Greeting Hoschi
source german
[GELÖST] Battlefield 2 & Joystick
translate.google automatic finnish translation
Hei ihmiset,
kiitos myötätuntoa, nyt olen ratkaissut ongelman.
Se on myös hieman tyhmä selitetty peliohjain BF2.
Jos haluat määrittää näppäimistön asettelun, tai suuntaa tehtävän tässä tapauksessa sinun täytyy tehdä 2 kertaa.
Sammuta etu- ja yksi takana, yksi oikealle ja toinen vasemmalle, ja kerran oikealle ja kääntyisi vasemmalle.
Suuri virhe tässä on ollut se, että sillä on ohjata eteen / taakse / oikea / vasen käännös oikealle / vasemmalle käännyttäessä havaitsee automaattisesti, mutta ei voinut suorittaa, koska akseli on määritetty ainoastaan ??yhteen suuntaan.
Periaatteessa olen nyt akselin osoitettu kahdesti ja kertoo minulle ohjain.
Joten, kaikille jotka eivät ole ymmärtäneet sitä nyt (olet kohtaamaan tällainen ongelma jo, joten voit kiivetä kautta):
ottaa joystick, asentaa ohjelmistoja ja sitten testata Windows (on meißt automaattisesti kuljettajan ohjelmisto!)
Sitten mene ohjaus- tehtävän ja antaa joka suuntaan kunkin ohjaussauvan liikkeen, vaikka viestin tulee: "Keys esiintyä kahdesti!"
"OK" lopettaa ja voit pelata. Jos joku on kysyä, hänen tulisi rohkeasti yhteyttä minuun!
Kiitos avusta,
tervehdys Hoschi
maybe it helps solve the problem
Thank you for your participation, meanwhile I solved the problem.
It is also a bit stupid in the game control at BF2.
If you want to configure the key assignment, or the direction assignment in this case, you have to do this twice.
One for front and one for rear, one for right and one for left, one for right and one for left.
The big mistake here is that it has automatically recognized the control of / hi / re / li clockwise / counterclockwise, but could not execute because one axis was assigned only for one direction.
In principle, I have now occupied the axes twice and this is shared by the control.
So, for all who have not understood it (you have to be confronted with such a problem, so you go through):
Joystick take, software install and then under Windows test (is taken over automatically automatically from the driver software!)
Then go into the control assignment and assign EVERY direction of each joystick movement, even if the message comes up: "Key assignment appears twice!"
Use "ok" and you can play. If someone has still ask, he is allowed to contact me!
Thanks for your help,
Greeting Hoschi
source german
[GELÖST] Battlefield 2 & Joystick
translate.google automatic finnish translation
Hei ihmiset,
kiitos myötätuntoa, nyt olen ratkaissut ongelman.
Se on myös hieman tyhmä selitetty peliohjain BF2.
Jos haluat määrittää näppäimistön asettelun, tai suuntaa tehtävän tässä tapauksessa sinun täytyy tehdä 2 kertaa.
Sammuta etu- ja yksi takana, yksi oikealle ja toinen vasemmalle, ja kerran oikealle ja kääntyisi vasemmalle.
Suuri virhe tässä on ollut se, että sillä on ohjata eteen / taakse / oikea / vasen käännös oikealle / vasemmalle käännyttäessä havaitsee automaattisesti, mutta ei voinut suorittaa, koska akseli on määritetty ainoastaan ??yhteen suuntaan.
Periaatteessa olen nyt akselin osoitettu kahdesti ja kertoo minulle ohjain.
Joten, kaikille jotka eivät ole ymmärtäneet sitä nyt (olet kohtaamaan tällainen ongelma jo, joten voit kiivetä kautta):
ottaa joystick, asentaa ohjelmistoja ja sitten testata Windows (on meißt automaattisesti kuljettajan ohjelmisto!)
Sitten mene ohjaus- tehtävän ja antaa joka suuntaan kunkin ohjaussauvan liikkeen, vaikka viestin tulee: "Keys esiintyä kahdesti!"
"OK" lopettaa ja voit pelata. Jos joku on kysyä, hänen tulisi rohkeasti yhteyttä minuun!
Kiitos avusta,
tervehdys Hoschi
maybe it helps solve the problem
-
PLODDITHANLEY
- Posts: 3608
- Joined: 2009-05-02 19:44
Re: Joystick Problem
Years ago when I had a Logitech there were many threads about Logitech problems on BF2 have a search.
-
AlonTavor
- PR:BF2 Developer
- Posts: 2991
- Joined: 2009-08-10 18:58
Re: Joystick Problem
One of the problem I noticed with my joystick is that it doesn't respond ingame until I go to control panel -> USB game controllers, hit properties on the joystick and close. I have to do this every restart, every single time its like this.
Blame windows.
Blame windows.
-
Impulser
- Posts: 12
- Joined: 2017-05-11 06:33
Re: Joystick Problem
Worked the 1st time for me but not anymore. I have to re-configure my joystick everytime i close PR[R-CON]AlonTavor wrote:One of the problem I noticed with my joystick is that it doesn't respond ingame until I go to control panel -> USB game controllers, hit properties on the joystick and close. I have to do this every restart, every single time its like this.
Blame windows.
