Marlin Large - Namer vs Beast does not work
-
CAS_ual_TY
- PR:BF2 Contributor
- Posts: 926
- Joined: 2016-01-04 12:30
Marlin Large - Namer vs Beast does not work
It just doesnt work. The beasts do absolutely nothing on this map.
"bUt BeAsT hAs SpLaSh"
Doesnt matter. Beast is so weak it has to stay far from INF. Not so the Namer, it can just jump into a blop of enemies and start pounding. You can literally just push with inf and both Namers together and Mec is completely hopeless.
I shouldnt have to even make this thread. You can take away the beasts entirely or give Idf 2 Merkavas instead, the outcome will be the same. How was this even considered?
And no, the beast literally has no chance of outplaying a Namer. Namer can easily ***-face both beasts and still win with ez.
"bUt BeAsT hAs SpLaSh"
Doesnt matter. Beast is so weak it has to stay far from INF. Not so the Namer, it can just jump into a blop of enemies and start pounding. You can literally just push with inf and both Namers together and Mec is completely hopeless.
I shouldnt have to even make this thread. You can take away the beasts entirely or give Idf 2 Merkavas instead, the outcome will be the same. How was this even considered?
And no, the beast literally has no chance of outplaying a Namer. Namer can easily ***-face both beasts and still win with ez.


-
Raidonrai
- Posts: 90
- Joined: 2015-01-23 15:17
Re: Marlin Large - Namer vs Beast does not work
Beast beats namer on land
-
WingWalker
- Posts: 349
- Joined: 2020-04-09 21:03
Re: Marlin Large - Namer vs Beast does not work
You go to war with the Army you have, not the Army you want...CAS_ual_TY wrote:And no, the beast literally has no chance of outplaying a Namer.
W.W.
v0.4
v0.4
-
Coalz101
- Posts: 493
- Joined: 2017-07-03 11:11
Re: Marlin Large - Namer vs Beast does not work
Hmm hello, may i remind you on the alt layout of this map we use to get 2 bmp3s vs 2 AMX RCWingWalker wrote:You go to war with the Army you have, not the Army you want...
replace the 2 beasts with 1 bmp 3 and I'll be 10 times happy
-
Danesh_italiano
- Posts: 576
- Joined: 2012-07-23 03:25
Re: Marlin Large - Namer vs Beast does not work
namer vs bmp3 balance worked very well on old beirut and bijar....
I only know that I know nothing. Só sei que nada sei. Sólo sé que no sé nada. So solo di non sapere nulla. Tantum scio me nihil scire. Je sais seulement que je ne sais rien. Tiedän vain, etten tiedä mitään. Ich weiss nur dass ich nichts weiss. Ek weet net dat ek niks weet nie. Wiem tylko, ?e nic nie wiem. Heoi ko ahau anake e mohio ana kahore au e mohio. Ngiyazi kuphela ukuthi angazi lutho.
-
CAS_ual_TY
- PR:BF2 Contributor
- Posts: 926
- Joined: 2016-01-04 12:30
Re: Marlin Large - Namer vs Beast does not work
What kind of dumb comment is this? I am trying to give feedback to balance a map here not to write another volume to the Art of War.WingWalker wrote:You go to war with the Army you have, not the Army you want...


-
transpilot
- Posts: 109
- Joined: 2019-02-28 06:25
Re: Marlin Large - Namer vs Beast does not work
Another get good issue....CAS_ual_TY wrote:It just doesnt work. The beasts do absolutely nothing on this map.
"bUt BeAsT hAs SpLaSh"
Doesnt matter. Beast is so weak it has to stay far from INF. Not so the Namer, it can just jump into a blop of enemies and start pounding. You can literally just push with inf and both Namers together and Mec is completely hopeless.
I shouldnt have to even make this thread. You can take away the beasts entirely or give Idf 2 Merkavas instead, the outcome will be the same. How was this even considered?
And no, the beast literally has no chance of outplaying a Namer. Namer can easily ***-face both beasts and still win with ez.
You just need 1 AR disturbing the namer so the beast crew can jump out and dig a tow to kill the namer.
-
CAS_ual_TY
- PR:BF2 Contributor
- Posts: 926
- Joined: 2016-01-04 12:30
Re: Marlin Large - Namer vs Beast does not work
So no one from dev side tuning in on this, giving thoughts or an explanation of the idea behind this? RIP marlin


-
Outlawz7
- Retired PR Developer
- Posts: 17261
- Joined: 2007-02-17 14:59
Re: Marlin Large - Namer vs Beast does not work
Was having New Year's.CAS_ual_TY wrote:So no one from dev side tuning in on this, giving thoughts or an explanation of the idea behind this? RIP marlin
Beast has been replaced with BMP-2 (non-ATGM) for next patch.

-
UncleSmek
- Posts: 1027
- Joined: 2008-09-02 05:07
Re: Marlin Large - Namer vs Beast does not work
Why not BMP-3?Outlawz7 wrote:Was having New Year's.
Beast has been replaced with BMP-2 (non-ATGM) for next patch.
bmp2 without atgm wont do shit
Last edited by UncleSmek on 2021-01-04 15:33, edited 1 time in total.
-
transpilot
- Posts: 109
- Joined: 2019-02-28 06:25
Re: Marlin Large - Namer vs Beast does not work
Bmp 3 would be overkill
-
CAS_ual_TY
- PR:BF2 Contributor
- Posts: 926
- Joined: 2016-01-04 12:30
Re: Marlin Large - Namer vs Beast does not work
2x BMP3 would definitely be too much. If were talking about a vehicle with ATGM, it would have to be BMP3 because BMP2 can shoot consecutively, fucking up Namers.transpilot wrote:Bmp 3 would be overkill
2 BMP2s is a start, not because of their offense, but because they can take more hits. But I think BMP2 + BMP3 will be needed for best (still not ideal) balance in the future. Or offset it by adding a M113 vs Beast. Or maybe adding a Vulcan vs Shturm additionally to the coming changes. IDF balance just isnt easy todo.


-
Outlawz7
- Retired PR Developer
- Posts: 17261
- Joined: 2007-02-17 14:59
Re: Marlin Large - Namer vs Beast does not work
Anything ATGM can also take on tanks while Namer can't

-
CAS_ual_TY
- PR:BF2 Contributor
- Posts: 926
- Joined: 2016-01-04 12:30
Re: Marlin Large - Namer vs Beast does not work
Youre right. BMP2s is a good change already. I dont think you can make it better unless you add a whole different mix into it. MEC atleast has better HAT.Outlawz7 wrote:Anything ATGM can also take on tanks while Namer can't


-
Coalz101
- Posts: 493
- Joined: 2017-07-03 11:11
Re: Marlin Large - Namer vs Beast does not work
Plz give BMP 1 with malyutka. (JK)
I still think we might get steamrolled even with 2 normal bmps, maybe we can get 1 BMP2 with atgm (Not the BMP2M, just the normal BMP2 with atgm) and another bmp2 without. Even if that BMP2 decides to fight a tank, it's most likely 1 shot kill on it if it gets spotted unlike something like a bmp3 which might sustain that damage. Another thing is that it has a low rate of fire so its likely that it might die before it can even reload.
I still think we might get steamrolled even with 2 normal bmps, maybe we can get 1 BMP2 with atgm (Not the BMP2M, just the normal BMP2 with atgm) and another bmp2 without. Even if that BMP2 decides to fight a tank, it's most likely 1 shot kill on it if it gets spotted unlike something like a bmp3 which might sustain that damage. Another thing is that it has a low rate of fire so its likely that it might die before it can even reload.
-
PatrickLA_CA
- Posts: 2243
- Joined: 2009-07-14 09:31
Re: Marlin Large - Namer vs Beast does not work
What are you talking about, 2 BMP2s are more than enough, they might need to be smart about taking on the Namers but they will eat infantry up in no time.
In-game: Cobra-PR
-
Danesh_italiano
- Posts: 576
- Joined: 2012-07-23 03:25
Re: Marlin Large - Namer vs Beast does not work
Lats can easily kill bmp3s, lats can NOT easily kill namers.Outlawz7 wrote:Anything ATGM can also take on tanks while Namer can't
2x Bmp3 vs 2x namer worked very well on bijar and worked very well on good old beirut... Each vehicle with your advantages..
If it worked very well on bijar that bmp3s keep big distance from enms firing hefrag, why it would be OP on marlin that inf is way closer (that meaning it is way izi to lat it)
If people still thinks that is op, 1 bmp3M (yes, gib one with thermals as namer got thermals) and 1 bmp2
I only know that I know nothing. Só sei que nada sei. Sólo sé que no sé nada. So solo di non sapere nulla. Tantum scio me nihil scire. Je sais seulement que je ne sais rien. Tiedän vain, etten tiedä mitään. Ich weiss nur dass ich nichts weiss. Ek weet net dat ek niks weet nie. Wiem tylko, ?e nic nie wiem. Heoi ko ahau anake e mohio ana kahore au e mohio. Ngiyazi kuphela ukuthi angazi lutho.
-
Coalz101
- Posts: 493
- Joined: 2017-07-03 11:11
Re: Marlin Large - Namer vs Beast does not work
We don't need thermals for MEC, if we even had that the map would be steamroll on inf from any team.Danesh_italiano wrote: If people still thinks that is op, 1 bmp3M (yes, gib one with thermals as namer got thermals) and 1 bmp2
Having 2 BMP2s with ATGMs however (They don't have thermals) can be pretty useful considering the namer's armour PLUS the fact that it has thermals and can steamroll you if it's well smoked
-
CAS_ual_TY
- PR:BF2 Contributor
- Posts: 926
- Joined: 2016-01-04 12:30
Re: Marlin Large - Namer vs Beast does not work
BMP-3 vs Namer can work. But you can not give MEC a BMP-2 with ATGM. BMP-2 is almost immune to .50cal for the one part, for the secont part it can shoot ATGMs consecutively, while the BMP-3 can not. So a BMP-2 w/ ATGM completely outclasses a Namer, both defensively and offensively.Coalz101 wrote:Plz give BMP 1 with malyutka. (JK)
I still think we might get steamrolled even with 2 normal bmps, maybe we can get 1 BMP2 with atgm (Not the BMP2M, just the normal BMP2 with atgm) and another bmp2 without. Even if that BMP2 decides to fight a tank, it's most likely 1 shot kill on it if it gets spotted unlike something like a bmp3 which might sustain that damage. Another thing is that it has a low rate of fire so its likely that it might die before it can even reload.
So do the Beasts. You are missing the point of this thread entirely. CROWS Humvees also eat up infantry in no time, but thats not balanced, is it?PatrickLA_CA wrote:What are you talking about, 2 BMP2s are more than enough, they might need to be smart about taking on the Namers but they will eat infantry up in no time.
Could work. But Bijar is a way bigger map. The Tank v Tank fight is already pretty awkward, BMP3 might tip the balance. But if the current changes still dont work, def a try.Danesh_italiano wrote:Lats can easily kill bmp3s, lats can NOT easily kill namers.
2x Bmp3 vs 2x namer worked very well on bijar and worked very well on good old beirut... Each vehicle with your advantages..
If it worked very well on bijar that bmp3s keep big distance from enms firing hefrag, why it would be OP on marlin that inf is way closer (that meaning it is way izi to lat it)
If people still thinks that is op, 1 bmp3M (yes, gib one with thermals as namer got thermals) and 1 bmp2
Read first reply. Cant be BMP2s with ATGM. Would have to be BMP3 w/o thermals.Coalz101 wrote:We don't need thermals for MEC, if we even had that the map would be steamroll on inf from any team.
Having 2 BMP2s with ATGMs however (They don't have thermals) can be pretty useful considering the namer's armour PLUS the fact that it has thermals and can steamroll you if it's well smoked


-
InfantryGamer42
- Posts: 495
- Joined: 2016-03-16 16:01
Re: Marlin Large - Namer vs Beast does not work
I think he is talking about standard BMP-2, not BMP-2M.CAS_ual_TY wrote:BMP-3 vs Namer can work. But you can not give MEC a BMP-2 with ATGM. BMP-2 is almost immune to .50cal for the one part, for the secont part it can shoot ATGMs consecutively, while the BMP-3 can not. So a BMP-2 w/ ATGM completely outclasses a Namer, both defensively and offensively.
