[Model] Pistolet Makarova (PM) [WIP]

samogon100500 · Post by **samogon100500** » 2010-05-25 14:36

Pistol for Russian forces and mostly terrorists!
it's continuation of this thread!

iwillkillyouhun · Post by **iwillkillyouhun** » 2010-05-25 15:25

woowooowowow gooood job man !!!! i LOVE it can't w8

Trexian · Post by **Trexian** » 2010-05-25 17:11

Looks good!

(No adjustable rear sight?)

Post by **motherdear** » 2010-05-25 17:14

hmm whats up with all the n-gons. looks like somebody has scarred it

keep it up though and i am positive, that with enough dedication it will turn out alright

samogon100500 · Post by **samogon100500** » 2010-05-25 17:36

[R-CON]Trexian wrote:Looks good!
(No adjustable rear sight?)

Thx
It's not adjustable!May be export version(IZh-70,IZh-71 etc) have that!

[R-DEV]motherdear wrote:hmm whats up with all the n-gons. looks like somebody has scarred it

keep it up though and i am positive, that with enough dedication it will turn out alright

O you about smooth?Yeah they looks not good,cuz i edit model,and not every time check smoothing groups.
P.sIt's Lod0,Lod1 have ~950 triangles!

Post by **motherdear** » 2010-05-25 17:40

no wasn't that. every part of the model that has 5 verts that are not connected by a edge is an n-gon. these are notorious for bad smoothing and weird behaviour. every n-gon should be divided into 3-4 sided polygons.

an area this would be in on your weapon is on the side of the receiver, seems like it has quite a few of the unoptimized verts.

DeltaFart · Post by **DeltaFart** » 2010-05-26 01:42

He's sent it to me to UV it, I'll look through the model if he wants to, might take until weekend, if thats not too long, cause I kinda got a Senior Project for english that if I fail I can't graduate, so unfortunately SChool comes first
I'l try too look at it tomorrow though K man?
BTW only export's have the adjustable sights, but they are buyable in the aftermarket

samogon100500 · Post by **samogon100500** » 2010-05-26 06:28

[R-DEV]motherdear wrote:no wasn't that. every part of the model that has 5 verts that are not connected by a edge is an n-gon. these are notorious for bad smoothing and weird behaviour. every n-gon should be divided into 3-4 sided polygons.

an area this would be in on your weapon is on the side of the receiver, seems like it has quite a few of the unoptimized verts.

Thanks grip looks better!
After all fixes am sent screen on forum!

samogon100500 · Post by **samogon100500** » 2010-05-26 09:59

About tri-count - 1 image right,just i found uselles polygons-helpers!

Post by **motherdear** » 2010-05-26 11:00

before you uv this delta let me take a look at it. upload the max file samogon

samogon100500 · Post by **samogon100500** » 2010-05-26 11:33

[R-DEV]motherdear wrote:before you uv this delta let me take a look at it. upload the max file samogon

some UVs mostly done!They are collapsed!

MEGAUPLOAD - The leading online storage and file delivery service

masterceo · Post by **masterceo** » 2010-05-26 11:36

There's 1 thing wrong with this model

Look at the grip on your slide, now look at this photo:

Notice the grip is the other way around?

Post by **Hauteclocque** » 2010-05-26 13:27

Do you consider this as finished ?

(I need to know what to comment, since the mag surroundings and the barrel seem not to be finished)

iwillkillyouhun · Post by **iwillkillyouhun** » 2010-05-26 13:40

masterceo wrote:There's 1 thing wrong with this model

Look at the grip on your slide, now look at this photo:

Notice the grip is the other way around?

he has a really good point and i noticed this too

samogon100500 · Post by **samogon100500** » 2010-05-26 15:16

[R-COM]Hauteclocque wrote:Do you consider this as finished ?

(I need to know what to comment, since the mag surroundings and the barrel seem not to be finished)

No it's not finished!
Well The.Fist says pistols can be have ~6000tris how.So what tris limits how?

DeltaFart · Post by **DeltaFart** » 2010-05-26 15:19

Sam, dont UV this if you plan on working the model over
The UVs are last thing on your mind if you have to fix the model a bit

samogon100500 · Post by **samogon100500** » 2010-05-26 15:27

DeltaFart wrote:Sam, dont UV this if you plan on working the model over
The UVs are last thing on your mind if you have to fix the model a bit

No I'm not take UVs,just am make UV,and collapse that!
UV changes with model!
Anyway i'm most edit that

Post by **Hauteclocque** » 2010-05-26 15:44

Look at this reference to do the mag entrance (I don't know if there is an English word for this), and weld the wood and metal parts here (I've seen in your model that it was not the case in wireframe mode.)

Also, please make a hole in the barrel.

Add some tris on the hammer, look squarish now.

Keep up the good work.

masterceo · Post by **masterceo** » 2010-05-26 18:44

but will you change the grip as it's obviously facing the wrong way?

samogon100500 · Post by **samogon100500** » 2010-05-27 07:33

'[R-COM wrote:Hauteclocque;1352190']
Look at this reference to do the mag entrance (I don't know if there is an English word for this), and weld the wood and metal parts here (I've seen in your model that it was not the case in wireframe mode.)

Also, please make a hole in the barrel.

Add some tris on the hammer, look squarish now.

Keep up the good work.

About hole - it's can be make by texture!And they no have wood details,only on export versions and special version for heros and grand officers!

So,am make more polygons on grip,cuz i see that on L85A2 wire(W.I.P. thread)!
It's have hov many triangles,but have better quality!1500 tris it's no high for modern computers!

[Model] Pistolet Makarova (PM) [WIP]

[Model] Pistolet Makarova (PM) [WIP]

Re: [Model]Pistolet Makarova(PM)[W.I.P]

Re: [Model]Pistolet Makarova(PM)[W.I.P]

Re: [Model]Pistolet Makarova(PM)[W.I.P]

Re: [Model]Pistolet Makarova(PM)[W.I.P]

Re: [Model]Pistolet Makarova(PM)[W.I.P]

Re: [Model]Pistolet Makarova(PM)[W.I.P]

Re: [Model]Pistolet Makarova(PM)[W.I.P]

Re: [Model]Pistolet Makarova(PM)[W.I.P]

Re: [Model]Pistolet Makarova(PM)[W.I.P]

Re: [Model]Pistolet Makarova(PM)[W.I.P]

Re: [Model]Pistolet Makarova(PM)[W.I.P]

Re: [Model]Pistolet Makarova(PM)[W.I.P]

Re: [Model]Pistolet Makarova(PM)[W.I.P]

Re: [Model]Pistolet Makarova(PM)[W.I.P]

Re: [Model]Pistolet Makarova(PM)[W.I.P]

Re: [Model]Pistolet Makarova(PM)[W.I.P]

Re: [Model]Pistolet Makarova(PM)[W.I.P]

Re: [Model]Pistolet Makarova(PM)[W.I.P]

Re: [Model]Pistolet Makarova(PM)[W.I.P]