Page 1 of 2

Can't open PR, stops at PR logo rectangle

Posted: 2011-01-31 15:56
by boberczus
I know that there was somewhere written about that problem but can't find it xD

So it's not my problem but my friends. He has windows 7, before it he had VISTA and everything worked fine, but now when he doubleclicks PR icon a ractangle shows up with PR logo and nothing happens and after about 1 minutes it closes.

Any ideas?

Re: Can't open PR, stops at PR logo rectangle

Posted: 2011-01-31 15:58
by AfterDune
Run both BF2.exe and PR.exe in "always run as administrator". And make sure to run BF2.exe in Windows XP SP3 compatibility mode.

Hope this helps.

Re: Can't open PR, stops at PR logo rectangle

Posted: 2011-01-31 17:34
by boberczus
No it didn't :(

Any other ideas ? Please!

Re: Can't open PR, stops at PR logo rectangle

Posted: 2011-01-31 17:51
by DenvH
Change the short cut target to:

"***\EA GAMES\Battlefield 2\mods\pr\pr.exe" +fullscreen 1

you can also try +fullscreen 0, but make sure it is outside of the "" marks and leave the path to pr.exe the same (don't copy the *** !!!:razz :)

Hope it helps you.

Re: Can't open PR, stops at PR logo rectangle

Posted: 2011-01-31 17:54
by Zach1923
Okay right click on the PR icon and go to properties.

Next click on the compatibility tab. Check the boxes for disable visual themes and disable desktop composition.

Now click apply, ok, and then try starting the game.

Re: Can't open PR, stops at PR logo rectangle

Posted: 2011-01-31 19:15
by WeeGeez
Im no expert but when this happened to me I read deleting profiles under my docs/battlefield2 worked. It worked.. Something to do with the display resolution line in any of video.con files /profiles that prevents startup... typical dodgy BF2 coding..

Re: Can't open PR, stops at PR logo rectangle

Posted: 2011-01-31 19:31
by boberczus
Nothing chnaged ?! But thx for trying.
Any other ideas?

Re: Can't open PR, stops at PR logo rectangle

Posted: 2011-01-31 21:34
by WhatMan
  • Direct X
  • .NET Framework
  • Updating NVIDIA/ATI Drivers
or completety reinstalling everything

Re: Can't open PR, stops at PR logo rectangle

Posted: 2011-01-31 21:57
by Blexie
C:\Users\YOURUSER\Documents\Battlefield 2\Profiles\Default

Open video.con with notepad.

Go to the line VideoSettings.setResolutionYOURxRESOLUTION@YOURREFRESHRATE

Change it so it says VideoSettings.setResolution 800x600@60Hz

This fixed the problem for me, hope it helps.

Re: Can't open PR, stops at PR logo rectangle

Posted: 2011-01-31 22:09
by TheComedian
Blexie wrote:C:\Users\YOURUSER\Documents\Battlefield 2\Profiles\Default

Open video.con with notepad.

Go to the line VideoSettings.setResolutionYOURxRESOLUTION@YOURREFRESHRATE

Change it so it says VideoSettings.setResolution 800x600@60Hz

This fixed the problem for me, hope it helps.
This is the usual problem with a fresh windows install. Try it.

Re: Can't open PR, stops at PR logo rectangle

Posted: 2011-02-01 06:26
by AfterDune
Only if you're using an old profile - that's my experience anyway.

Re: Can't open PR, stops at PR logo rectangle

Posted: 2011-02-01 10:14
by Nick_Gunar
Blexie wrote:C:\Users\YOURUSER\Documents\Battlefield 2\Profiles\Default
Why don't you delete the entire folder?

It worked for me. You just have to set all your previous options back (+ account and PW).

Re: Can't open PR, stops at PR logo rectangle

Posted: 2011-02-01 13:39
by boberczus
Blexie wrote:C:\Users\YOURUSER\Documents\Battlefield 2\Profiles\Default

Open video.con with notepad.

Go to the line VideoSettings.setResolutionYOURxRESOLUTION@YOURREFRESHRATE

Change it so it says VideoSettings.setResolution 800x600@60Hz

This fixed the problem for me, hope it helps.
Problem solved :) , partly because of that. My friends didnt even have video.con in MD so i send it him and it works ;)

THX guys for help :)

Re: Can't open PR, stops at PR logo rectangle

Posted: 2011-03-01 14:47
by Viki
Hello. I have played PR earlier on this computer lots of times. No parts on the computer has been changed since then. I was able to play both BF:2 and PR smoothly.
I took a pause of PR during my military service for around one year.

Problem: Installed PR 0.95 when it was released but after this when I tried starting the game: the logo appears, the screen goes black for a few seconds and then I am back at the desktop.
Both BF:2 and PR behaved this way.
I completely uninstalled and deleted BF:2, PR and the patches.
Now I have installed BF:2 but it still does the same thing; at startup the logo appears, screen is black for a few seconds and then I am back at the desktop.

Code: Select all

[b]CPU[/b]
You Have: AMD Athlon(tm) 64 X2 Dual Core Processor 6400+

[b]CPU Speed[/b]
You Have: 3.2 GHz

[b]RAM[/b]
You Have: 2.0 GB

[b]OS[/b]
You Have: Microsoft Windows XP Professional Service Pack 3 (build 2600)

[b]Video Card[/b]
You Have: GeForce 8800 GT
Video RAM: 736.0 MB
3D: Yes
Hardware T&L: Yes
Pixel Shader version: 3.0
Vertex Shader version: 3.0

[b]DirectX version[/b]
You Have: 9.0c

[b]Sound Card[/b]
You Have: SoundMAX Integrated Digital HD Audio

[b]Free Disk Space[/b]
You Have: 48.3 GB

[b]DVD-ROM[/b]
You Have: Optiarc DVD RW AD-5170A

*Used http://www.systemrequirementslab.com/cyri and it was above recommended to run Crysis.
Current situation: BF:2 installed, currently downloading patches but does it make a difference? If I can't get vanilla BF:2 to work, it sounds like PR does the same thing?
Blexie wrote:C:\Users\YOURUSER\Documents\Battlefield 2\Profiles\Default

Open video.con with notepad.

Go to the line VideoSettings.setResolutionYOURxRESOLUTION@YOURREFRESHRATE

Change it so it says VideoSettings.setResolution 800x600@60Hz
Since I have currently only BF:2 installed a line that looks closest like that is: game.setGameDisplayMode 800 600 32 0.

The whole video.con looks like this on notepad:

Code: Select all

rem Optimal setting for CPU > 1400 MHZ
game.setGameDisplayMode 800 600 32 0
game.setDetailTexture 4
game.setShadows 1
game.setEnvironmentMapping 1
game.setGraphicsQuality 3
game.setLightmaps 1
game.setRenderWhenSpawnMenu 1
game.setMenuViewdistance 100
game.setEffectsQuality 3
game.setPerformance 3
Nick_Gunar wrote:Why don't you delete the entire folder?
Had no effect either.

I tried running as administrator but if complains I need a password for it which I do not have and never have had.

Begging for help here. Thanks. :-)

Re: Can't open PR, stops at PR logo rectangle

Posted: 2011-03-01 15:14
by Mj Pain
I used this setting in video.con to fix same problem with PR closing on startup.

Code: Select all

VideoSettings.setTerrainQuality 1
VideoSettings.setGeometryQuality 1
VideoSettings.setLightingQuality 1
VideoSettings.setDynamicLightingQuality 1
VideoSettings.setDynamicShadowsQuality 1
VideoSettings.setEffectsQuality 1
VideoSettings.setTextureQuality 1
VideoSettings.setTextureFilteringQuality 1
VideoSettings.setResolution 1280x1024@60Hz
VideoSettings.setAntialiasing 2Samples
After that PR started and i could adjust settings to old settings (1920x1200 all high).

Re: Can't open PR, stops at PR logo rectangle

Posted: 2011-03-02 05:15
by thsky
Im no expert but when this happened to me I read deleting profiles under my docs/battlefield2 worked. It worked.. Something to do with the display resolution line in any of video.con files /profiles that prevents startup... typical dodgy BF2 coding..

Re: Can't open PR, stops at PR logo rectangle

Posted: 2011-03-03 15:09
by Jorgee!
My dear friend, if its a fresh installation, create the profile with BF2, then configure the video options, close Bf2 and open PR.

Re: Can't open PR, stops at PR logo rectangle

Posted: 2011-03-03 20:30
by the_ganman
i get this, so i start vbf2 wait till the first movie start alt f4 and pr starts up np

Re: Can't open PR, stops at PR logo rectangle

Posted: 2011-03-20 16:03
by BeerPowered
I have problems starting pr too. I see PR logo rectlange, then i see only black screen, and pc crashes, it doesn't even respond to ctrl+alt+del, Video.con is set correctly, bf2 itself is running fine. Might be some issue with startup videos. When trying to run windowed, graphics goes crazy, I see a massive graphics glitch, and still, no response.

Toshiba Satellite A300 Laptop
Pentium Dual Core 2ghz
4GB RAM
Windows Vista Home Premium (6.0, Build 6002) SP2
BIOS: InsydeH2O Version 1.90
Mobility Radeon HD3470

What should i do?

Re: Can't open PR, stops at PR logo rectangle

Posted: 2011-03-23 11:56
by BeerPowered
DP, sorry. Just noticed, the same happens when i try to join BF2 server with xfire. Seems to crash, when another application tries to open bf2.