[Solved] Creative X-FI @ Ultra High = BSOD only in PR

[jaghammer]

hi mates,
i have the BSOD-Problem too with my Xtreme Gamer Card, but Yesterday i try this solution out and.... after 3 Rounds of Playing NO BSOD.
well, for me looks like this F**** Problem is solved.


thx to megagoth for his PAX Driver found
Greetz JAG

[illidur]

**** i eventually BSOD on korengal. time to try out Pax's modified drivers *fingers crossed*.

thanks for sharing the drivers in any case megagoth.

[Garack]

we need more input only 3 rounds is a little less.. any more have feedback?

[jaghammer]

we need more input only 3 rounds is a little less.. any more have feedback?

dont forget 3 PR rounds is like 5hours^^
before i insall these Drivers i got BSOD after even Round

[BloodyDeed]

I installed the new driver too. Expect some feedback soon.

[Megagoth1702]

Sorry guys I also just got to round Nr.3 yesterday... I was trying to go rambo as much as I could but unfortunately the ticket amount on certain maps is just too high and it took me also about 5hrs to complete that. Cant really judge.

I think IF ANYONE reaches round nr.6 or 8 we are done with this BS.

Do NOT THANK ME!!! Thank ROBERT at PAX Driverss for doing this! I posted and the same day HE pretty much started working... And he just does it for hobby!

[Garack]

OK i will test this too and create a account on his forum to thank if it works.-

[KEIOS]

played three rounds then got a bsod again

BCCode: 50
BCP1: FFFFFFFF974F0000
BCP2: 0000000000000000
BCP3: FFFFF80002479882
BCP4: 0000000000000005
OS Version: 6_0_6002
Service Pack: 2_0
Product: 768_1

[illidur]

i also posted in the thread and he made a beta pcie titanium version with the same fix. IN THE SAME DAY. that guy is awesome. i haven't gotten enough rounds in to tell if it works yet.

[jaghammer]

sry guys bad news...
i got BSOD today by playing Karbala, and a friend have it to same time, same place same map, but eith another X-Fi Card.
i think he have Titanium PCI-E Version.
probably its a problem with some maps.
the last 2 days i got no BSOD on 5hr non stop fighting.
but i didnt play karbala until this.

Maps i played without BS:
-Asad
-Jabal
-Muttrah
-Kozelsk
-Al Basrah
-Kashan
-Silent Eagle
-Fools Road
-Kokan

[Garack]

i doubt that a coder can solve this, perhaps hardware related.

[KEIOS]

dont forget 3 PR rounds is like 5hours^^
before i insall these Drivers i got BSOD after even Round

That is surely an improvement and i will keep the Creative Ultrahigh Settings activated, since most of the time it works. Still it would be nice to have a real fix.

@Megagoth: Are you in contact with the Coder?

[illidur]

That is surely an improvement and i will keep the Creative Ultrahigh Settings activated, since most of the time it works. Still it would be nice to have a real fix.

@Megagoth: Are you in contact with the Coder?

megagoth is the one who found him and told him about our problem. then i asked him if he could add the same fix to his titanium drivers. so we are testing it... which is hard. even if it does bsod sometimes i'm keeping my settings as its far more rare now for how much better it is.

[talkinBEERmug]

I was running the Drivers for the PCIe Titanium first day played 3 maps fine, second day I blue screened 3 times on map load.

[illidur]

I was running the Drivers for the PCIe Titanium first day played 3 maps fine, second day I blue screened 3 times on map load.

do you normally BSOD while loading map or ingame?

did you install the "titanium 3.3 beta 4" driver from pax? thats the one he made for this.

[Dr Rank]

Not tried this yet (message 128 ), might work?

http://forums.creative.com/t5/Sound-Bla ... 97/page/13

hmm, looks like that's actually just for Stalker, but its worth following and posting in this thread as Creative guys have been responding.

[illidur]

Dr Rank;1551864']Not tried this yet (message 128 ), might work?

X-RAM causing BSOD (STOP 0x50 - PAGE_FAULT_IN_NONP... - Page 13 - Creative Labs

hmm, looks like that's actually just for Stalker, but its worth following and posting in this thread as Creative guys have been responding.

He says that he does it for "mods". Im just wondering which one we would put in bf2 "wrap.oal.dll 2.2.0.5" or "openal.dll 6.14.0357.23 ". Currently useing "wrap.oal.dll 2.1.8.1".

Im also already testing the drivers.... would be too many changes. Are you going to try it Dr Rank?

[Garack]

can anyone contact the coder and tell him that this is not working

[Megagoth1702]

Dr Rank;1551864']Not tried this yet (message 128 ), might work?

X-RAM causing BSOD (STOP 0x50 - PAGE_FAULT_IN_NONP... - Page 13 - Creative Labs

hmm, looks like that's actually just for Stalker, but its worth following and posting in this thread as Creative guys have been responding.

Huh, really? They are responding? o? Created 2 "easy to answer" threads a while ago, pushed em 2 times, no response. I gave up on Creative.

As far as I know all the "replace the openAL.dll"-workarounds do not work, although I will try the one mention there.

[Garack]

X-RAM causing BSOD (STOP 0x50 - PAGE_FAULT_IN_NONPAGED_AREA)

New drivers to test