Barb/razor wire "walkthrough"

Suggestions from our community members for PR:BF2. Read the stickies before posting.
erikkir
Posts: 39
Joined: 2008-01-27 19:18

Barb/razor wire "walkthrough"

Post by erikkir »

I've been seeing a lot on Prison break lately. After trying to remember what have happened in the earlyer seasons, I remembered especially one thing that can be connected with PR; the wire upon the walls at the prisons. I don't know if any of you have seen it(or even care about it), but in the first season, they put some clothes over the wire to get across without hurting themselves.

So here is my suggestion:
What about making something to put on the wire so a squad can get over the wire without being hurt? Mabye it(if made) could be put in one of the "request" kits so it won't be so easy to get and use?



Regards,
=FU= erikkir
Solid Knight
Posts: 2257
Joined: 2008-09-04 00:46

Re: Barb/razor wire "walkthrough"

Post by Solid Knight »

Usually when you want to breach c-wire you just throw something on top of it or have somebody lay on it. I don't know how "big friggin' log" will go over with the DEVs as a kit item. Then of course is the matter of how do you deploy this object, how will it let you get over (on a technical level), et cetera.
Zeppelin35
Posts: 191
Joined: 2008-01-13 02:55

Re: Barb/razor wire "walkthrough"

Post by Zeppelin35 »

I haven't seen Prison Break but I've seen what you're talking about in Fight Club. Although it would be cool there are two big problems with it.

1) Not realistic. I'm no expert but I'm sure soldiers would more likely use wire cutters than a piece of cloth to go over razor wire.

2) Almost 100% sure that this would be impossible or incredibly difficult to do using the Battlefield 2 engine.
Solid Knight
Posts: 2257
Joined: 2008-09-04 00:46

Re: Barb/razor wire "walkthrough"

Post by Solid Knight »

^ Regarding issue one, I've breached c-wire (in exercises) with sticks, logs, jackets, and even laying down on it so people could step over me to get to the other side. Really, this just comes down to circumstance. I'm not aware of a SOP for scaling obstacles... it'd be kind of ridiculous to have one. Like "If you encounter a rock..."
crazy11
Retired PR Developer
Posts: 3141
Joined: 2008-02-05 00:20

Re: Barb/razor wire "walkthrough"

Post by crazy11 »

Im pretty sure you can just blow it up. It would be a lot easier.
Image
You miss 100% of the shots you don't take.- Wayne Gretzky
Thermis
Retired PR Developer
Posts: 1537
Joined: 2008-01-27 15:05

Re: Barb/razor wire "walkthrough"

Post by Thermis »

Don't believe everything you see on TV. If you came across this in the field you'd either bring it down to a point you could step over it with whatever you had, or you would blow it up. Blowing it up is a lot most effective and cooler to watch.
GreedoNeverShot
Posts: 213
Joined: 2008-06-16 20:48

Re: Barb/razor wire "walkthrough"

Post by GreedoNeverShot »

But what about the INS? Wouldn't it be more effective for INS to just pick up a piece of debris or clothes and throw it over the obstacle, rathher than relying on a bomb maker coming. I know there is the Ambusher kit, but if you just encountered barb wire, you wouldn't call them, you would just throw something on it, or find a way around...
"If you outlaw guns, only Outlaws will have guns."
erikkir
Posts: 39
Joined: 2008-01-27 19:18

Re: Barb/razor wire "walkthrough"

Post by erikkir »

I actually liked the idea with the wire cutters(I diden't mean pieces of clothes, I was just fishing around the dam to find the right thing to use for getting past a wire) :)

Ain't it possible to do something like the cars have? All pieces with wheels are just driving through the wire without taking damage(only a little from the sticks holding the wire).
An underdog may rise to the occacion!
___________________________________________________
*RR* erikkir
CodeRedFox
Retired PR Developer
Posts: 5919
Joined: 2005-11-08 00:47

Re: Barb/razor wire "walkthrough"

Post by CodeRedFox »

Interesting topic but there wont be any rug deployables. Its meant to be a defense object. If you come up against one better go around.
Image
"apcs, like dogs can't look up" - Dr2B Rudd
erikkir
Posts: 39
Joined: 2008-01-27 19:18

Re: Barb/razor wire "walkthrough"

Post by erikkir »

[R-DEV]CodeRedFox wrote:Interesting topic but there wont be any rug deployables. Its meant to be a defense object. If you come up against one better go around.
Well, in some cases, there is no way around :S

Let's say your in a little area with some open space. Like the Goverment office flag at Qway River. There is three entries in to that area. What happens if your forces have no cars or hardware inside there, and all the entries are blocked with wire? Just wondering :confused:
An underdog may rise to the occacion!
___________________________________________________
*RR* erikkir
Solid Knight
Posts: 2257
Joined: 2008-09-04 00:46

Re: Barb/razor wire "walkthrough"

Post by Solid Knight »

Get up on the roof of one of the buildings, jump on the wall, slide down. The building is located near the front entrance.
daranz
Posts: 1622
Joined: 2007-04-16 10:53

Re: Barb/razor wire "walkthrough"

Post by daranz »

Solid Knight wrote:Get up on the roof of one of the buildings, jump on the wall, slide down. The building is located near the front entrance.
That's for getting out, but not in. I've seen the fight stall at government office many times. It turns to a dragged-out siege after a while, because people are stuck shooting through the razor wire, having no means of breaching it, even while they continue to eliminate all opposition on the other side. It's somewhat silly.
Image
Chuc
Retired PR Developer
Posts: 7016
Joined: 2007-02-11 03:14

Re: Barb/razor wire "walkthrough"

Post by Chuc »

You got other tools.. to come.
Image
Personal Folio - http://www.studioash.net
Teek
Posts: 3162
Joined: 2006-12-23 02:45

Re: Barb/razor wire "walkthrough"

Post by Teek »

erikkir wrote:Well, in some cases, there is no way around :S

Let's say your in a little area with some open space. Like the Goverment office flag at Qway River. There is three entries in to that area. What happens if your forces have no cars or hardware inside there, and all the entries are blocked with wire? Just wondering :confused:
get a spec ops to throw a grapple over a wall?

ohh! then you can get the spec-ops to SLAM the wire so you dont have to deal with it. (or leave it so you can take its advantage)
Image
Solid Knight
Posts: 2257
Joined: 2008-09-04 00:46

Re: Barb/razor wire "walkthrough"

Post by Solid Knight »

Use explosives or a grappling hook or drive a vehicle up to the wall and use it to jump over. I mean, you essentially complaining that razor wire, when well placed, is hindering your mobility as it is designed to do. It's not just something to walk around you're supposed to use it to hinder enemy movement.
masterceo
Posts: 1914
Joined: 2008-08-25 23:00

Re: Barb/razor wire "walkthrough"

Post by masterceo »

if you're a medic then just jump over it then heal yourself, simple as that. Only works when wire was set up "properly" and not in the air

Priby:Why cant i be norwegian?
H.sta:becouse we are a specially selected bunch of people created by god to show how awsome mankind can be
Tartantyco
Posts: 2796
Joined: 2006-10-21 14:11

Re: Barb/razor wire "walkthrough"

Post by Tartantyco »

BANGALORE!
Make Norway OPFOR! NAO!
ImageImage
It's your hamster Richard. It's your hamster in the box and it's not breathing.
ERASERLASER
Posts: 152
Joined: 2007-12-30 14:58

Re: Barb/razor wire "walkthrough"

Post by ERASERLASER »

Just give the engineer back his C4 or atleast alternative explosives, that was a stupid decision to remove it in the first place.
Post Reply

Return to “PR:BF2 Suggestions”