[Static Model] door/stairs [WIP]

[Tannhauser]

added some walls and windows to the door, Walls and windows come to 9970 polys but it is a big building.

Yemeni Shibam (ancient cities) architecture!?

DO WANT !

DOWANTDOWANTDOWANTDOWANT

PS : Moar?

[smee]

nice, take it you got the idea from my sangar? Thou I got the idea from matt.b's little sangar but didn't like the way he did his too much

Yours is pretty high poly most likly, how many tris exactly? Your going to need some good LODs and COLs fro it I can tell you that, for my sangar, on LOD1 I removed the ends to the corrugated iron, and on LOD2 I made it flat but thick, then not sure about col0 but col1 and col2 where flat.

EDIT: also smee, I would really refrain from making and using lots of small objects in maps like this, espically if you plan on making buildings etc out of lots of little objects because they are REALLY bad to lightmap and as a result are bad on performance.

Fine to have a small few objects where needed, but wouldn't start making buildings etc out of lots of small objects.

was 96 poly's/tris to bit to high just for a bit of corrigatted iron. end up just doing with textures would have been nice to have higher but think other things are more important than that to have polys. Will take on board the not using lots of small things shame really.

[Rhino]

na, its fine to have high polys on something like that, providing the LODs knock them off well which it isn't to hard to do for that

[smee]

was thinking with the corrigated building to have them built up together but could be something like 40+ sheets, so would be like 3840 just for the walls, bit to much for a minor structure. Prefer the idea of 780

[Rhino]

noooo, do not build up buildings with lots of small objects, VERY bad idea as I found out with my afghan buildings...

if you want to make a building out of corrugated iron, you make it in max then export it as one building.

[smee]

Its ok I got the message

on other note. 7100poly 8100 polys Yeman House within the 10000 for large building.

Stairs are 1143 polys & tri's each or 5715 alone you think it's worth the expense, stairs are seperate object to put in the editor.
Building 2.830 & tri's

[smee]

noooo, do not build up buildings with lots of small objects, VERY bad idea as I found out with my afghan buildings...

if you want to make a building out of corrugated iron, you make it in max then export it as one building.

Was thinking that, but still too high poly count for a tin hut IMHO.

[rangedReCon]

Cool models, keep it up!

[space]

Stairs are 1143 polys & tri's each or 5715 alone you think it's worth the expense

The angle of the stairs looks very shallow, and the step height looks very low too. If you changed these, could you not reduce the poly count considerably?

[Rhino]

Was thinking that, but still too high poly count for a tin hut IMHO.

it is kinda, but its even worse on the poly count etc to make it out of lots of little bits....

[Wilkinson]

I could use that Bldg. Great work smee, Your on your way mate.